Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 21 x 17.5 mm development board built on the Nordic nRF52840 with Bluetooth 5.0, NFC and Zigbee support. Its ultra-low deep sleep draw and onboard lithium battery charging make it well suited to compact wireless and wearable builds.

Key Highlights

  • Nordic nRF52840 chip with FPU running up to 64 MHz
  • Bluetooth 5.0, BLE, NFC and Zigbee wireless support onboard
  • 1 MB flash, 256 kB RAM plus 2 MB QSPI flash
  • Deep sleep power consumption below 5 microamps
  • 11 GPIO, 6 ADC, UART, IIC, SPI and SWD interfaces
  • 21 x 17.5 mm breadboard-friendly board with SMD design

Ideal For

  • Makers building compact Bluetooth wearables
  • Developers prototyping NFC or Zigbee wireless links
  • Engineers running embedded machine learning experiments
  • Hobbyists building mini Arduino projects
  • Designers needing a small board for SMD-friendly production

Buying Tip

Plan your power source before soldering: the board accepts 5V at VIN and can charge a small lithium cell at 50 mA or 100 mA, so match your battery capacity to the charging current you select.

Elecvora expert review

Our verdict

The XIAO BLE nRF52840 squeezes real wireless capability and useful memory into a genuinely tiny board. It is a sensible pick when space and power budget matter more than raw pin count.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Bluetooth 5.0, NFC and Zigbee in one small board
  • 2 MB QSPI flash adds useful storage
  • Deep sleep below 5 microamps suits battery devices
  • Breadboard-friendly with no components on the back

Cons

  • Limited to 11 GPIO pins
  • Generates some heat at this size
  • Requires a separate 5V source or battery

Best for

Compact wireless wearables and Bluetooth sensor nodes

Not ideal for

Projects needing many GPIO pins or large displays

Specifications

WirelessBluetooth 5.0/NFC/Zigbee
Onboard Chipmemory: 1 MB flash 256 kB RAM
Onboard Memory2 MB QSPI flash
Interface1xUART, 1xIIC, 1xSPI, 1xNFC, 1xSWD, 11xGPIO(PWM), 6xADC
Operating Voltageoperating voltage: 3.3V@200mA Charging current: 50mA/100mA Input voltage (VIN): 5V/ Standby power consumption:  <5μA
Dimensions (L x W x H) mm21 x 17.5mm
Shipping Weight0.008 kg
Shipping Dimensions10 × 7 × 1 cm

What's in the box

  • 1 x Seeed Studio XIAO BLE nRF52840

Frequently Asked Questions

What wireless standards does this board support?
It supports Bluetooth 5.0 including BLE, plus NFC and Zigbee, using the onboard antenna.
How much memory does it have?
The nRF52840 provides 1 MB flash and 256 kB RAM, and the board adds 2 MB of QSPI flash.
What voltage does it need?
It operates at 3.3V and accepts 5V at the VIN input. Charging current for a lithium battery can be set to 50 mA or 100 mA.
Is a battery included?
No. The package contains only the XIAO BLE nRF52840 board, though it does include lithium battery charge management.
Will the board get warm?
Yes, some heat is generated because of the small size. This does not affect operation, and an external heatsink can be used if you want to reduce it.
Which development environments are supported?
The board is supported by Arduino and CircuitPython.

Overview

The Seeed Studio XIAO BLE nRF52840 is a miniature development board that packs wireless connectivity into the classic XIAO form factor. At only 21 x 17.5 mm, it is small enough to sit inside wearable devices and compact enclosures, yet it carries the Nordic nRF52840 chip with an FPU that can operate up to 64 MHz. Bluetooth 5.0, BLE, NFC and Zigbee are all supported, so a single board can cover a range of short-range wireless projects.

Memory is generous for this size class: 1 MB of flash and 256 kB of RAM are built into the chip, and an additional 2 MB QSPI flash is available onboard. The board is supported by Arduino and CircuitPython, which keeps the entry barrier low whether you are prototyping quickly or moving toward a small production run.

Key Features

  • Wireless onboard: Bluetooth 5.0, BLE, NFC and Zigbee support with an onboard antenna.
  • Compact footprint: 21 x 17.5 mm, breadboard-friendly, with an SMD design and no components on the back.
  • Efficient power: standby consumption below 5 microamps and integrated lithium battery charge management.
  • Flexible I/O: 11 GPIO pins with PWM, 6 ADC channels, plus UART, IIC, SPI, NFC and SWD interfaces.
  • Expanded storage: 2 MB QSPI flash in addition to the chip's internal memory.

Specifications Explained

The nRF52840 chip handles processing and wireless duties, with its FPU helping with the maths-heavy routines common in sensor fusion and machine learning work. The 1 MB flash and 256 kB RAM cover firmware and runtime data, while the 2 MB QSPI flash gives you room for logs, models or assets without external parts.

Operating voltage is 3.3V at up to 200 mA, and the VIN input accepts 5V. Charging current is selectable at 50 mA or 100 mA, which suits small lithium cells. Deep sleep below 5 microamps is useful when a device spends most of its life idle and wakes only to transmit. Note that the small size means some heat is generated during operation; this does not affect function, and an external heatsink can be used if you want to reduce it.

Compatibility and Requirements

The board is supported by Arduino and CircuitPython development environments. Programming is done through the SWD interface or the board's supported workflows, and a 5V supply is needed at VIN when not running from a battery. A lithium battery can be connected for portable use thanks to the onboard charge management.

Typical Uses

  • Wearable devices and small body-worn sensors
  • Wireless connection projects using Bluetooth or NFC
  • Embedded machine learning and tiny machine learning experiments
  • Mini Arduino projects and compact prototypes

What's in the Box

1 x Seeed Studio XIAO BLE nRF52840 board.

Quick specs

Wireless
Bluetooth 5.0/NFC/Zigbee
Onboard Chip
memory: 1 MB flash 256 kB RAM
Onboard Memory
2 MB QSPI flash
Interface
1xUART, 1xIIC, 1xSPI, 1xNFC, 1xSWD, 11xGPIO(PWM), 6xADC
Operating Voltage
operating voltage: 3.3V@200mA Charging current: 50mA/100mA Input voltage (VIN): 5V/ Standby power consumption:  <5μA
Dimensions (L x W x H) mm
21 x 17.5mm
See all specifications