Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by Seeed Studio, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: sram 264KB; digital i/o pins Pins 11; analog i/o pins Pins 4. Check that your power source supplies 3.3V/5V DC before connecting it.

Key Highlights

  • SRAM: 264KB
  • Digital I/O Pins: Pins 11
  • Analog I/O Pins: Pins 4

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

SRAM264KB
Digital I/O PinsPins 11
Analog I/O PinsPins 4
PWM Pins11
Flash Memory2mb
Power Supply Voltage (V)3.3V/5V DC
Dimensions (L x W x H) mm20×17.5×3.5mm
Shipping Weight0.004 kg
Shipping Dimensions11 × 8 × 1 cm

Overview

The Seeed Studio XIAO RP2040 v1.0, made by Seeed Studio, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • SRAM: 264KB
  • Digital I/O Pins: Pins 11
  • Analog I/O Pins: Pins 4
  • PWM Pins: 11
  • Flash Memory: 2mb (more memory leaves room for larger programs and buffers)
  • Power Supply Voltage (V): 3.3V/5V DC (match this to your power supply; too high a voltage can damage the part)
  • Dimensions (L x W x H) mm: 20×17.5×3.5mm (measure your mounting space before ordering)
  • Shipping Weight: 0.004 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Note: Due to small size heating issue will be generated, but will not affect the working of the product. To avoid excessive heating you can use external heatsink.   The Seeed Studio XIAO RP2040 v1.0 is as small as the Seeeduino XIAO but it's more powerful. On one hand, it carries the powerful Dual-core RP2040 processor that can flexible clock running up to 133 MHz which is a low-power microcontrollers. On the XIAO RP2040 there is also 264KB of SRAM, and 2MB of on-board Flash memory which can provide more program to save and run. On the other hand, this little board has good performance in processing but needs less power. All in all, it is designed in a tiny size as small as a thumb(20x17.5mm) and can be used for wearable devices and small projects. There are 14 GPIO PINs on XIAO RP2040, on which there are 11 digital pins, 4 analog pins, 11 PWM Pins,1 I2C interface, 1 UART interface, 1 SPI interface, 1 SWD Bonding pad interfac

Hardware:


Features: 

  1. Powerful MCU: Dual-core ARM Cortex M0+ processor, flexible clock running up to 133 MHz
  2. Rich on-chip resources: 264KB of SRAM, and 2MB of on-board Flash memory
  3. Flexible compatibility: Support Micropython/Arduino/CircuitPython
  4. Easy project operation: Breadboard-friendly & SMD design, no components on the back
  5. Small size: As small as a thumb(20x17.5mm) for wearable devices and small projects.
  6. Multiple interfaces: 11 digital pins, 4 analog pins, 11 PWM Pins,1 I2C interface, 1 UART interface, 1 SPI interface, 1 SWD Bonding pad interface.

Useful link:

Getting Started with Seeed Studio XIAO RP2040

Application:

  1. Wearable devices
  2. Rapid prototyping (directly attached to the expanded PCB as a minimal system)
  3. Perfect for all the projects that need mini Arduino
  4. DIY keyboard
  5. USB development (USB to multi-channel TTL/USB host mode, etc.)

Package Includes:

1 x XIAO RP2040 Microcontroller

 

Quick specs

SRAM
264KB
Digital I/O Pins
Pins 11
Analog I/O Pins
Pins 4
PWM Pins
11
Flash Memory
2mb
Power Supply Voltage (V)
3.3V/5V DC
See all specifications