Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 3.2-inch 240x320 TFT display with ILI9341 driver and XPT2046 resistive touch, supporting SPI and parallel interfaces. It combines a compact colour screen with touch input for embedded GUIs and data readouts.

Key Highlights

  • 3.2-inch TFT panel with 240x320 pixel resolution
  • ILI9341 driver IC for display control
  • XPT2046 resistive touchscreen for touch input
  • 3-wire SPI, 4-wire SPI, 8-bit and 16-bit parallel interfaces
  • RGB565 colour data format
  • Compact and light module for space-limited builds

Ideal For

  • Embedded developers building touch-based control panels
  • Arduino, STM32 and ESP32 hobbyists adding a colour screen
  • Raspberry Pi users creating compact dashboards
  • Students learning display and touch interfacing
  • Makers building portable sensor readouts

Buying Tip

Check which interface mode your display library supports before wiring, since the module offers SPI and parallel options that use different pin counts.

Elecvora expert review

Our verdict

A well-rounded small display module that combines a 240x320 panel with resistive touch and flexible interface options. It suits embedded projects where a compact, touch-capable screen is needed.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Multiple interface options for different boards
  • Touch controller integrated on the module
  • Compact 3.2-inch size suits small enclosures
  • ILI9341 driver is widely supported by libraries

Cons

  • Resistive touch requires pressure rather than a light tap
  • Wiring and library setup vary by interface mode
  • No cable or header details are specified

Best for

Embedded developers and hobbyists needing a compact touch display

Not ideal for

Users wanting a large-format or capacitive multi-touch screen

Specifications

Model No. / NameTFT LCD Display
Touch TypeResistive (XPT2046)
Display Size (Inch)3.2
Driver ICILI9341
Interface3-WireSPI /4-Wire SPI/ 8-bit parallel /16-bit parallel interface
Data FormatRGB565
Shipping Weight0.03 kg
Shipping Dimensions14 × 11 × 5 cm

What's in the box

  • 1 x SmartElex 3.2" TFT Resistive Touch Display 240x320

Frequently Asked Questions

What resolution does the display offer?
The panel is 240x320 pixels, giving a portrait-oriented screen for text, menus and simple graphics.
Which driver IC does it use?
It uses the ILI9341 display driver, with an XPT2046 controller for the resistive touch layer.
What interface options are available?
The module supports 3-wire SPI, 4-wire SPI, 8-bit parallel and 16-bit parallel interfaces.
Which boards is it compatible with?
It is listed as compatible with Arduino, STM32, ESP32 and Raspberry Pi platforms, subject to correct wiring and library support.
What is included in the package?
The package contains one SmartElex 3.2" TFT Resistive Touch Display 240x320.
How should I care for the display?
Handle the panel by its edges, avoid pressing hard on the screen surface, and keep the module away from moisture and static discharge.

Overview

The SmartElex 3.2" TFT Resistive Touch Display is a compact colour screen module built around a 240x320 pixel TFT panel. It combines the ILI9341 display driver with an XPT2046 resistive touch controller, so both the visual output and the touch input are handled on one board. That combination is useful when you need a small interactive interface without adding a separate touch overlay.

The module is aimed at embedded developers, students and hobbyists who want a display that can adapt to different wiring schemes. Because it offers several interface options, it can be matched to the bus your microcontroller or single-board computer handles most comfortably.

Key Features

  • 3.2-inch TFT LCD with 240x320 resolution for clear text and graphics
  • ILI9341 driver IC for display control
  • XPT2046 resistive touch controller for touch input
  • Selectable 3-wire SPI, 4-wire SPI, 8-bit parallel and 16-bit parallel interfaces
  • RGB565 data format for colour rendering
  • Lightweight module suited to portable and enclosed builds

Specifications Explained

Display and driver

The 240x320 resolution gives a portrait-oriented panel with enough detail for menus, sensor readouts, charts and simple graphical interfaces. The ILI9341 driver IC is the component that receives display data and drives the panel, and it is the part your software library will target.

Touch control

The resistive touch layer uses the XPT2046 controller. Resistive touch responds to pressure from a finger or stylus, which suits menu selection, buttons and numeric entry in embedded interfaces.

Interface options

You can connect the module over 3-wire SPI, 4-wire SPI, 8-bit parallel or 16-bit parallel. SPI uses fewer pins and is often the simpler route for small microcontrollers, while parallel modes can move data over a wider bus. Choose the mode that fits your board's available pins and your library's support.

Colour format

RGB565 means colour is transmitted as 16-bit values, five bits for red, six for green and five for blue. This is a common format for embedded displays and keeps colour data compact.

Compatibility and Requirements

The display is listed as compatible with Arduino, STM32, ESP32 and Raspberry Pi platforms. You will need to match the interface mode to your board and use a display library that supports the ILI9341 driver and, for touch, the XPT2046 controller. Wiring, pin assignment and level handling depend on the host board you use.

Typical Uses

  • Graphical user interfaces for embedded projects
  • Portable instruments and handheld readouts
  • Real-time data visualisation from sensors
  • IoT device control panels
  • Industrial and prototype control interfaces

What's in the Box

1 x SmartElex 3.2" TFT Resistive Touch Display 240x320.

Quick specs

Model No. / Name
TFT LCD Display
Touch Type
Resistive (XPT2046)
Display Size (Inch)
3.2
Driver IC
ILI9341
Interface
3-WireSPI /4-Wire SPI/ 8-bit parallel /16-bit parallel interface
Data Format
RGB565
See all specifications