
1 / 4 · Click to enlarge
AI Summary
A compact digital PIR module that converts motion into 14-bit values with a programmable detection algorithm set through an external MCU. It covers up to 12m at a 120° angle while drawing under 12µA.
Key Highlights
- Digital PIR output converted to 14-bit values
- Programmable detection algorithm configured via external MCU
- Up to 12m detection range with 120° horizontal sensing
- Ultra-low static current under 12µA for battery designs
- Adjustable on-time from 2 to 3600 seconds
- Compact 38 x 22mm board with 3 x 4mm window
Ideal For
- IoT developers building battery-powered motion nodes
- Makers adding presence detection to smart lighting
- Security hobbyists assembling alarm prototypes
- Automation engineers needing tunable PIR behaviour
- Students learning digital sensor interfacing
Buying Tip
Check that your MCU supply sits within the 2.2 to 3.7V range before wiring the module, since the BS412 is configured and read through an external microcontroller.
Elecvora expert review
Our verdict
The BS412 suits builders who want more than a fixed-threshold PIR and are comfortable configuring it from a microcontroller. Its low current draw and broad 120° coverage make it a sensible fit for battery-powered detection projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 14-bit digital values give finer motion data than a plain trigger
- Under 12µA static current supports long idle periods
- 120° angle and 12m range cover a wide area
- Adjustable on-time from 2 to 3600 seconds
Cons
- Requires an external MCU for configuration
- Supply is limited to 2.2 to 3.7V
- No enclosure included, so mounting must be planned
Best for
Battery-powered IoT and automation projects needing tunable human motion detection
Not ideal for
Users wanting a plug-and-play sensor with no microcontroller setup
Specifications
| Item Type | PIR Motion Sensor |
|---|---|
| Voltage Rating (V) | 2.2 to 3.7 |
| Window Size | 3 × 4 mm |
| Sensing Angle | 120° (horizontal) |
| Power Consumption | <12 µA |
| Measurement Range | 12m |
| Length (mm) | 38 |
| Width (mm) | 22 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 5 × 5 × 3 cm |
What's in the box
- 1 x SmartElex BS412 PIR Motion Sensor
- 1 x Fresnel Lens
- 1 x 3 Pin interface cable
Frequently Asked Questions
What output does the BS412 provide?
What supply voltage does it need?
How far can it detect motion?
Can I change how long the output stays active?
Do I need a separate microcontroller?
What comes with the sensor?
Overview
The SmartElex BS412 is a digital passive infrared motion sensor module built for projects that need reliable human detection without a constant power budget. Instead of a simple on/off trigger, it converts PIR signals into 14-bit digital values and reports results through output interrupts, giving your microcontroller usable data rather than a single threshold event.
Because the detection algorithm is programmable through an external MCU, the module can be adapted to different environments and response styles. That flexibility, combined with a 120° horizontal sensing angle and up to 12m range, makes it a practical choice for automation, security and energy-saving designs.
Key Features
- Converts PIR signals into 14-bit digital values for accurate motion sensing
- Programmable detection algorithm configured from an external MCU
- Up to 12m human motion detection range
- Wide 120° horizontal sensing angle
- Ultra-low static current consumption below 12µA
- Adjustable on-time from 2 to 3600 seconds with 2-second lock time
- High or low level digital output signal
Specifications Explained
Sensing and range
The 120° horizontal angle lets one sensor watch a broad slice of a room, corridor or entryway. Detection reaches up to 12m, so ceiling or wall mounting can cover a useful area without repeat units.
Power
The module accepts 2.2 to 3.7V, which suits small lithium cells and common low-voltage logic supplies. Static current stays below 12µA, an important figure for devices that idle for long periods between events.
Output and timing
Motion is reported as a high or low level digital signal, and on-time can be set anywhere from 2 to 3600 seconds. A 2-second lock time prevents rapid retriggering after an event.
Size
The board measures 38mm long and 22mm wide, with a 3 by 4mm sensing window. That footprint fits inside compact enclosures and handheld builds.
Compatibility and Requirements
The BS412 requires an external MCU to configure its detection algorithm and read the digital output. It operates from a 2.2 to 3.7V supply. Refer to the datasheet and user manual in the attachments section for detailed configuration information.
Typical Uses
- Smart lighting that switches on when someone enters a space
- Alarm and security systems needing human motion detection
- Battery-powered IoT nodes that must idle at very low current
- Automation projects where detection timing is tuned in firmware
- Energy-efficient devices that react to presence
What's in the Box
- 1 x SmartElex BS412 PIR Motion Sensor
- 1 x Fresnel Lens
- 1 x 3 Pin interface cable
Quick specs
- Item Type
- PIR Motion Sensor
- Voltage Rating (V)
- 2.2 to 3.7
- Window Size
- 3 × 4 mm
- Sensing Angle
- 120° (horizontal)
- Power Consumption
- <12 µA
- Measurement Range
- 12m
















