
1 / 4 · Click to enlarge
At a glance
Made by SmartElex, this smartelex current sensors is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name ACS723; pcb size ( l x w ) mm 24.13 x 15.24; bandwidth 20.
Key Highlights
- Model No. / Name: ACS723
- PCB Size ( L x W ) mm: 24.13 x 15.24
- Bandwidth: 20
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | ACS723 |
|---|---|
| PCB Size ( L x W ) mm | 24.13 x 15.24 |
| Bandwidth | 20 |
| Measuring Current Range | 10mA up to 5A, AC or DC |
| Additional Specs. | Base Sensitivity: 400mV/A |
| Analog I/O Pins | 80kHz |
| Shipping Weight | 0.002 kg |
| Shipping Dimensions | 5 × 4 × 2 cm |
Overview
The SmartElex Current Sensor Breakout - ACS723, made by SmartElex, is listed in our smartelex current sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: ACS723
- PCB Size ( L x W ) mm: 24.13 x 15.24 (measure your mounting space before ordering)
- Bandwidth: 20 (measure your mounting space before ordering)
- Measuring Current Range: 10mA up to 5A, AC or DC (quoted range is usually line-of-sight; walls and interference shorten it)
- Additional Specs.: Base Sensitivity: 400mV/A
- Analog I/O Pins: 80kHz (make sure the rest of your system works at this frequency)
- Shipping Weight: 0.002 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 5 × 4 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
[vc_row][vc_column][vc_column_text]The SmartElex Current Sensor Breakout is a high accuracy board that utilizes the ACS723 for moderate AC and DC current sensing applications. The ACS723 sensor uses a Hall effect sensor to output a voltage relative to the current flowing through the IP+ and IP- pins on the board. The advantage of using a Hall effect sensor, specifically, is that the circuit being sensed and the circuit reading the sensor are electrically isolated meaning that, although your Arduino is running on 5V, the sensed circuit can be operating at higher DC or AC voltages! The SmartElex Current Sensor Breakout measures both DC and AC currents all the way up to 5A, has full electrical isolation of measured and sensed circuits, and has a base sensitivity of 400mV/A. Although the analog output is adjustable to 80kHz, the bandwidth on the ACS723 Sensor Breakout width filter has been set to 20kHz to reduce noise when using at high gains. The full 80KHz bandwidth that the sensor is capable of can be recovered by closing the JP1 (Bandwidth Select) jumper on the back of the board. Note: Although the chip itself is rated for up to 2.4kV (RMS) of isolation, the board has not been designed for such high voltage applications.
Features:
- Measures DC and AC currents from around 10mA up to 5A
- The version without the op-amp has a base sensitivity of 400mV/A
- Adjustable sensitivity with on-board amplifier, gain from 2.2 to 22 V/V
Package Includes:
1 x SmartElex Current Sensor Breakout - ACS723[/vc_column_text][/vc_column][/vc_row]
Quick specs
- Model No. / Name
- ACS723
- PCB Size ( L x W ) mm
- 24.13 x 15.24
- Bandwidth
- 20
- Measuring Current Range
- 10mA up to 5A, AC or DC
- Additional Specs.
- Base Sensitivity: 400mV/A
- Analog I/O Pins
- 80kHz
















