
1 / 4 · Click to enlarge
AI Summary
A compact high-side current sensor breakout built on the INA169 that measures DC current by reading the voltage drop across an external shunt resistor. It runs from 3.3V or 5V and covers roughly 3.5mA to 35mA in its default setup.
Key Highlights
- High-side DC current monitoring with the INA169
- Operates from a 3.3V or 5V supply
- Default range of about 3.5mA to 35mA
- Range adjustable by changing the shunt resistor
- Compact 25.40 x 25.40mm PCB footprint
- Outputs a current that converts to a readable voltage
Ideal For
- Makers building low-power DC monitoring projects
- Students learning current sensing and shunt measurement
- Electronics engineers prototyping inline current checks
- Battery-powered device developers tracking current draw
Buying Tip
Plan your shunt resistor and its power rating before you buy, because the current range and heat dissipation depend entirely on the resistor you choose.
Elecvora expert review
Our verdict
A tidy, affordable breakout that makes high-side DC current sensing straightforward for small loads. It is best treated as a flexible building block, since the range and accuracy depend on the shunt and output resistors you supply.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple high-side sensing on the positive rail
- Works from 3.3V or 5V supplies
- Range easily changed with a different shunt resistor
- Compact 25.40 x 25.40mm board
Cons
- DC measurement only, not suitable for AC
- Requires external shunt and output resistors
- Shunt power rating must be chosen carefully
Best for
Low-current DC monitoring in maker and bench projects
Not ideal for
AC current measurement or high-current loads without a suitable power resistor
Specifications
| Model No. / Name | INA169 |
|---|---|
| Voltage Rating (V) | 3.3 to 5 |
| Measuring Current Range | 3.5mA to 35mA |
| PCB Size ( L x W ) mm | 25.40 x 25.40 |
| Shipping Weight | 0.002 kg |
| Shipping Dimensions | 5 × 4 × 2 cm |
What's in the box
- 1 x SmartElex Current Sensor Breakout - INA169
Frequently Asked Questions
What current range does this board measure?
Can it measure AC current?
What supply voltage does it need?
Do I need extra components?
How do I choose the shunt resistor power rating?
What is included with the board?
Overview
The SmartElex INA169 Current Sensor Breakout is a small, ready-to-use board for measuring DC current in your projects. It uses the INA169 high-side current monitor, which means the shunt resistor sits on the positive power rail rather than in the ground return path. The device measures the voltage drop across that shunt and outputs a proportional current, which you turn into a voltage by placing a resistor from the output to ground.
Because the board runs from a 3.3V or 5V supply and uses a compact 25.40 x 25.40mm PCB, it fits neatly into breadboard builds, small enclosures and portable test setups.
Key Features
- INA169 high-side current monitor for DC measurement
- Supply voltage of 3.3V or 5V
- Default current sense range of approximately 3.5mA to 35mA
- Range scales with the shunt resistor you select
- Output current converted to voltage with a resistor to ground
- Compact 25.40 x 25.40mm PCB
Specifications Explained
Voltage rating: the board is rated for 3.3V to 5V operation. This is the supply that powers the INA169 itself and sets the available output voltage swing.
Measuring range: in the default setup the board covers about 3.5mA to 35mA. The range is not fixed by the chip; it depends on the shunt resistor (RS) and the output resistor (RL) you use. A 10Ω shunt gives roughly 3.5mA to 35mA, a 1Ω shunt shifts the window to about 35mA to 350mA, and a 0.1Ω shunt moves it to around 350mA to 3.5A.
PCB size: at 25.40 x 25.40mm the board is compact enough for tight builds while leaving room for clean solder joints.
Compatibility and Requirements
The INA169 is intended for DC measurement only. The VIN+ pin must sit at a higher potential than VIN- so the device cannot measure AC. You supply your own shunt resistor, and its power rating matters: a 0.1Ω shunt carrying 3.5A dissipates about 1.2W, so choose a resistor rated well above that, such as a 2W or 3W part. You also need an output resistor (RL) to ground to read the result as a voltage; 10kΩ is a common choice.
Typical Uses
- Monitoring current draw in low-power DC circuits
- Battery-powered device experiments
- Bench testing and electronics education
- Adding current feedback to microcontroller projects
What's in the Box
1 x SmartElex Current Sensor Breakout - INA169.
Quick specs
- Model No. / Name
- INA169
- Voltage Rating (V)
- 3.3 to 5
- Measuring Current Range
- 3.5mA to 35mA
- PCB Size ( L x W ) mm
- 25.40 x 25.40
- Shipping Weight
- 0.002 kg
- Shipping Dimensions
- 5 × 4 × 2 cm
















