Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A dynamic NFC/RFID tag based on the ST25DV64KC with 64-Kbit EEPROM, accessible via I2C and RF even when unpowered. It enables contactless data exchange and configuration in embedded projects.

Key Highlights

  • ST25DV64KC IC with 64-Kbit (8-KByte) EEPROM
  • Dual access via I2C and RF (NFC) interfaces
  • Read/write NFC memory even when tag is powered down
  • Fast transfer mode with 256-byte Mailbox buffer
  • General-purpose output for RF and I2C event interrupts
  • Compact PCB measuring 27.20 x 25.4 mm

Ideal For

  • Embedded engineers adding NFC to products
  • Makers building contactless data exchange projects
  • IoT developers needing NFC provisioning
  • Wearable designers integrating compact tags
  • Students learning about NFC and RFID

Buying Tip

Check that your NFC reader or phone supports ISO/IEC 15693 or NFC Forum Type 5 before purchasing, as these are the required protocols for RF access.

Elecvora expert review

Our verdict

The SmartElex Dynamic NFC RFID Tag offers a straightforward way to integrate dual-interface NFC/RFID memory into projects. Its ST25DV64KC IC provides reliable performance and useful features like fast transfer mode and energy harvesting, making it a solid choice for prototyping and small-scale production.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Dual I2C and RF access to 64-Kbit EEPROM
  • Works with unpowered NFC reading
  • Compact board size with PicoBlade connector
  • Fast transfer mode for efficient data exchange
  • Password protection for data security

Cons

  • Requires a host microcontroller for I2C use
  • PicoBlade connector limits supply to 3.3V
  • No onboard antenna tuning options

Best for

Engineers and makers needing contactless memory access in embedded designs

Not ideal for

Those seeking a standalone RFID reader or long-range tag

Specifications

Model No. / NameDynamic RFID Tag
Voltage Rating (V)5.5
EEPROM64-kBit, 8-kByte
I2C5ms for 1 up to 16 bytes
RF Range5ms for 1 block
I2C AddressUser Memory: 0x53, System Memory: 0x57, RF Switch Off: 0x51, RF Switch On: 0x55
PCB Size ( L x W ) mm27.20 x 25.4
Shipping Weight0.005 kg
Shipping Dimensions5 × 5 × 2 cm

What's in the box

  • 1 x SmartElex Dynamic NFC RFID Tag

Frequently Asked Questions

Can I read the tag with my smartphone?
Yes, if your smartphone supports NFC and can read ISO/IEC 15693 or NFC Forum Type 5 tags. Most modern Android phones and iPhones (with NFC) can read such tags.
What is the maximum supply voltage?
The IC supports up to 5.5V, but when using the PicoBlade connector, the maximum is 3.3V. Always check your connection method.
Does the tag need power to be read over NFC?
No, the RF interface can be accessed even when the tag is unpowered, as it harvests energy from the reader's field.
What is included in the package?
The package includes one SmartElex Dynamic NFC RFID Tag.
How do I protect data on the tag?
You can set a 64-bit password to restrict access to the memory. Refer to the ST25DV64KC datasheet for the password protection procedure.
What is the I2C address of the tag?
The I2C address depends on the memory area: 0x53 for user memory, 0x57 for system memory, 0x51 for RF switch off, and 0x55 for RF switch on.

Overview

The SmartElex Dynamic NFC RFID Tag brings the ST25DV64KC dynamic NFC/RFID tag IC to a ready-to-use breakout board. This tag offers 64-Kbit (8-KByte) of EEPROM that can be accessed from a host microcontroller over I2C or from any NFC-enabled device such as a smartphone or reader over RF. Because the RF interface remains functional even when the tag is unpowered, you can store data or settings that are always available to a reader within range.

Key Features

  • ST25DV64KC IC: Industry-standard dynamic NFC/RFID tag from STMicroelectronics.
  • 64-Kbit EEPROM: 8-KByte of user memory for data storage.
  • Dual interface: I2C and RF access to the same memory.
  • Fast transfer mode: 256-byte Mailbox buffer for quick data exchange between I2C and RF.
  • General-purpose output: Reports RF field changes, RF activity, I2C writes, and RF switch toggling.
  • Energy harvesting: Can output microwatts of power from a strong RF field.
  • Password protection: 64-bit password for securing data.

Specifications Explained

Voltage rating (5.5V max): The IC itself operates from 1.8V to 5.5V, but when used with the onboard PicoBlade connector, the supply should not exceed 3.3V. This flexibility allows direct connection to common 3.3V logic without level shifting.

EEPROM (64-Kbit, 8-KByte): The memory is organized for block access. Over I2C, a typical write of 1 to 16 bytes takes about 5ms. Over RF, a block of 4 bytes is written in about 5ms. Write cycle endurance ranges from 400,000 to 1,000,000 cycles depending on temperature.

I2C addresses: The tag uses different I2C addresses for user memory (0x53), system memory (0x57), RF switch off (0x51), and RF switch on (0x55). This allows flexible control of the RF interface.

RF range and speed: The RF interface is compliant with ISO/IEC 15693 and NFC Forum Type 5. Fast read access up to 53 kbit/s is supported.

Compatibility and Requirements

The tag works with any I2C host operating at 1.8V to 5.5V (3.3V recommended when using the PicoBlade connector) and with NFC readers or smartphones that support ISO/IEC 15693 or NFC Forum Type 5. No additional components are required for basic operation, though a host microcontroller is needed for I2C communication.

Typical Uses

  • Contactless configuration of embedded devices
  • Data logging with NFC readout
  • Smart posters and interactive displays
  • Wearable devices requiring NFC pairing
  • IoT nodes with NFC provisioning

What's in the Box

1 x SmartElex Dynamic NFC RFID Tag

Quick specs

Model No. / Name
Dynamic RFID Tag
Voltage Rating (V)
5.5
EEPROM
64-kBit, 8-kByte
I2C
5ms for 1 up to 16 bytes
RF Range
5ms for 1 block
I2C Address
User Memory: 0x53, System Memory: 0x57, RF Switch Off: 0x51, RF Switch On: 0x55
See all specifications