Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The SmartElex LHI778 PIR Motion Sensor Module detects infrared motion within a 120° field and outputs a HIGH signal. It runs on 3–5V with very low current draw and offers adjustable 0.3–25s response time.

Key Highlights

  • Wide 3–5V operating voltage for flexible power sources
  • 120° detection angle covers a broad area
  • Adjustable response time from 0.3s to 25s
  • Ultra-low current draw: 0.1mA at 3V, 0.15mA at 5V
  • Compact 44 × 20mm board with 9g weight
  • Includes Fresnel lens and 30cm 4-pin cable

Ideal For

  • Electronics hobbyists building motion-activated projects
  • Makers integrating presence detection into smart home systems
  • Students learning about PIR sensors and embedded systems
  • DIY security system builders
  • Battery-powered sensor node developers

Buying Tip

Check that your power supply stays within 3–5V and plan how you will mount the Fresnel lens, since no mounting hardware is included.

Elecvora expert review

Our verdict

The SmartElex LHI778 is a straightforward, low-power PIR module that covers the essentials for motion-sensing projects. Its wide voltage range and adjustable delay make it easy to adapt, though it lacks mounting hardware and detailed calibration guidance.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Very low current draw suits battery operation
  • Adjustable response time adds flexibility
  • Wide 3–5V compatibility
  • Compact and lightweight

Cons

  • No mounting hardware included
  • Requires soldering or crimping for permanent installation

Best for

Makers and hobbyists needing a simple, low-power motion sensor for automation or security projects.

Not ideal for

Applications requiring precise distance measurement or outdoor weatherproofing.

Specifications

Item TypeMotion Sensor
Model No. / NameLHI778
Voltage Rating (V)3 to 5
Detection Angle120°
Response Time(s)0.3s to 25s (adjustable)
Working Wavelength7–14µm
Operating Current (mA)0.1 (at 3V), 0.15 (at 5V)
Length (mm)44
Width (mm)20
Weight (g)09
Shipping Weight0.013 kg
Shipping Dimensions5 × 4 × 2 cm

What's in the box

  • 1 x SmartElex LHI778 PIR Motion Sensor Module
  • 1 x Fresnel Lens (8120-2)
  • 1 x 4 Pin Cable (30cm)

Frequently Asked Questions

What is the detection range of this sensor?
The product data does not specify a maximum detection distance. Detection depends on environmental conditions and the Fresnel lens used.
Can I power the module from a 3.3V supply?
Yes, the module operates from 3V to 5V, so a 3.3V supply is within range.
How do I adjust the response time?
Use the onboard potentiometer to set the delay from 0.3 seconds to 25 seconds.
What is included in the package?
You receive the LHI778 sensor module, a Fresnel lens (8120-2), and a 30cm 4-pin cable.
Does the sensor work with Arduino or Raspberry Pi?
The module outputs a digital HIGH signal and operates at 3–5V, which is compatible with many microcontrollers, but specific board compatibility is not listed in the product data.
How should I care for the sensor?
Keep the Fresnel lens clean and avoid exposing the module to moisture or extreme temperatures. Store in a dry place when not in use.

Overview

The SmartElex LHI778 PIR Motion Sensor Module is a compact infrared motion detector for electronics projects. It detects changes in infrared radiation emitted by nearby objects, especially human bodies, within a 120° field of view. When motion is sensed, the module outputs a HIGH signal that can trigger a microcontroller, relay, or other circuit. With a 3–5V voltage range and very low current consumption, it suits both battery-powered and embedded systems.

Key Features

  • Wide voltage support: Operates from 3V to 5V, matching common logic and battery supplies.
  • Broad detection angle: 120° field of view covers a wide area from a single mounting point.
  • Adjustable response time: Onboard potentiometer sets the output delay from 0.3s to 25s.
  • Low power draw: 0.1mA at 3V and 0.15mA at 5V help extend battery life.
  • Compact size: 44mm × 20mm board weighs just 9g for easy integration.
  • IR wavelength range: Sensitive to 7–14µm infrared, the band emitted by human bodies.

Specifications Explained

Voltage (3–5V): The module can be powered from a 3.3V or 5V rail, making it compatible with many development boards and battery packs. Detection angle (120°): A wide cone of coverage reduces blind spots in corners or above doorways. Response time (0.3–25s): The delay between detection and output change is adjustable, so you can set quick triggers or longer hold times. Operating current (0.1–0.15mA): Extremely low draw means the sensor won't drain small batteries quickly. Working wavelength (7–14µm): This is the infrared band where human body heat is most detectable, improving motion sensing reliability.

Compatibility and Requirements

The LHI778 works with any system that can supply 3V to 5V and read a digital HIGH signal. It requires a power source within that range and a way to connect the 4-pin cable to your circuit. No additional components are included beyond the module, Fresnel lens, and cable. Mounting hardware is not supplied.

Typical Uses

  • Security systems and intruder alerts
  • Automatic lighting for hallways or closets
  • Presence detection in smart home projects
  • Motion-activated cameras or recording devices
  • Battery-powered sensor nodes

What's in the Box

  • 1 × SmartElex LHI778 PIR Motion Sensor Module
  • 1 × Fresnel Lens (8120-2)
  • 1 × 4-Pin Cable (30cm)

Quick specs

Item Type
Motion Sensor
Model No. / Name
LHI778
Voltage Rating (V)
3 to 5
Detection Angle
120°
Response Time(s)
0.3s to 25s (adjustable)
Working Wavelength
7–14µm
See all specifications