Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SmartElex, this smartelex current sensors is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name ACS37800; bandwidth 1; current-sensing(a) +/-30. Check that your power source supplies 517 VRMS before connecting it.

Key Highlights

  • Model No. / Name: ACS37800
  • Bandwidth: 1
  • Current-Sensing(A): +/-30

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameACS37800
Isolation Voltage517 VRMS
Bandwidth1
Current-Sensing(A)+/-30
I2C Address0x60
PCB Size ( L x W ) mm30.48 x 38.1
Resistance(mΩ)0.85
Shipping Weight0.005 kg
Shipping Dimensions5 × 4 × 2 cm

Overview

The SmartElex Power Meter - ACS37800, made by SmartElex, is listed in our smartelex current sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: ACS37800
  • Isolation Voltage: 517 VRMS (match this to your power supply; too high a voltage can damage the part)
  • Bandwidth: 1 (measure your mounting space before ordering)
  • Current-Sensing(A): +/-30 (your supply must deliver at least this much current)
  • I2C Address: 0x60
  • PCB Size ( L x W ) mm: 30.48 x 38.1 (measure your mounting space before ordering)
  • Resistance(mΩ): 0.85
  • Shipping Weight: 0.005 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Need a power sensor that can sense voltage up to 60VDC and current up to 30A? This is the product for you! The Allegro MicroSystems ACS37800 power monitoring IC greatly simplifies the addition of power monitoring to many powered systems and is ideal for heavy current applications like:

  • Monitoring the power drawn by a 3D-printer
  • Monitoring the power drawn from a UAV battery
  • Battery charging / conditioning
  • Solar / photovoltaic panel power monitoring

Allegro’s Hall-effect-based, galvanically isolated current sensing technology achieves reinforced isolation ratings in a small PCB footprint. These features enable isolated current sensing without expensive Rogowski coils, oversized current transformers, isolated operational amplifiers, or the power loss of shunt resistors. The ACS37800 power monitoring IC offers key power measurement parameters that can easily be accessed through its digital interface. Dedicated and configurable I/O pins for voltage/current zero crossing, undervoltage and overvoltage reporting, and fast overcurrent fault detection are available. User configuration of the IC is available through on-chip EEPROM. Important Note: This product is not suitable for low current applications due to the +/-0.1A RMS Noise on the ACS37800’s current channel. Sensing less than an Amp? This is not the product for you… Safety Information: Although the ACS37800 power monitoring IC is capable of monitoring AC power at high line voltages, the SparkX Power Meter is designed for Safety Extra Low Voltage (SELV) applications of up to 60VDC only. Its use in AC power systems is not recommended or condoned.


Features:

  1. Allegro MicroSystems ACS37800
  2. 0.85 mΩ primary conductor resistance for low power loss
  3. 1 kHz bandwidth
  4. Current sensing range up to +/- 30 A
  5. Default I2C address: 0x60
  6. Voltage channel RMS noise: +/-0.3mV
  7. Current channel RMS noise: +/-0.1A
  8. Voltage channel total output error: +/-1% (-40°C to 125°C)
  9. Current channel total output error: +/-2% (25°C to 125°C)
  10. Current channel total output error: +/-2.7% (-40°C to 25°C)
  11. Two 0.25” (6mm) through-holes for high-current connections

Package Includes:

1 x SmartElex Power Meter - ACS37800

Quick specs

Model No. / Name
ACS37800
Isolation Voltage
517 VRMS
Bandwidth
1
Current-Sensing(A)
+/-30
I2C Address
0x60
PCB Size ( L x W ) mm
30.48 x 38.1
See all specifications