
1 / 3 · Click to enlarge
AI Summary
The SmartElex Proximity Sensor Breakout uses the VCNL4040 to detect objects up to 20 cm away with no dead zone. It also includes an ambient light sensor and connects easily via I2C at 3.3V.
Key Highlights
- VCNL4040 integrated IR emitter, proximity sensor, and ambient light sensor
- Qualitative detection range up to 20 cm with no dead zone
- I2C interface at address 0x60, hardware defined
- 3.3V operating voltage
- 0.1-inch spaced pins for breadboard or jumper wire use
- Compact 25.4 mm x 25.4 mm board
Ideal For
- Makers building touchless dispensers or automatic faucets
- Electronics hobbyists replacing analog Sharp sensors with a digital alternative
- Robotics enthusiasts needing short-range object detection
- Developers integrating ambient light sensing into their projects
Buying Tip
Remember that the I2C address is fixed at 0x60, so if you need multiple sensors on one bus, plan to use a multiplexer.
Elecvora expert review
Our verdict
The SmartElex VCNL4040 breakout offers a clean, no-solder solution for short-range proximity and ambient light sensing. Its lack of dead zone and parallel ALS/PS operation make it a strong choice for touchless interaction projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- No dead zone for reliable close-range detection
- Integrated ambient light sensor adds versatility
- Breadboard-ready pins simplify prototyping
- Compact board size
Cons
- Fixed I2C address limits multiple sensors without a multiplexer
- Requires 3.3V supply, not 5V tolerant
- Qualitative detection only, not precise distance measurement
Best for
Touchless dispensers, automatic faucets, and interactive exhibits
Not ideal for
Projects requiring precise distance measurement or 5V logic compatibility
Specifications
| Model No. / Name | VCNL4040 |
|---|---|
| Voltage Rating (V) | 3.3 |
| I2C Address | 0x60 |
| Length (mm) | 25.4 |
| Width (mm) | 25.4 |
| Shipping Weight | 0.008 kg |
| Shipping Dimensions | 6 × 6 × 2 cm |
What's in the box
- 1 x SmartElex Proximity Sensor Breakout - 20cm, VCNL4040
Frequently Asked Questions
What is the detection range of this sensor?
Can I connect multiple sensors to the same I2C bus?
What voltage does the sensor require?
Is soldering required to use this breakout?
Does it include an ambient light sensor?
What is included in the package?
Overview
The SmartElex Proximity Sensor Breakout is a ready-to-use module centered on the VCNL4040, a sensor that combines an infrared emitter, a proximity sensor, and an ambient light sensor in a single device. It is designed for projects that need reliable object detection at short range, up to 20 cm, without the dead zone found in some analog alternatives. The board operates at 3.3V and communicates over I2C at the fixed address 0x60. Because the 0.1-inch spaced pins are already broken out, you can connect it to a breadboard or jumper wires without soldering. The compact 25.4 mm by 25.4 mm footprint makes it easy to fit into tight enclosures.
Key Features
- Integrated modules: Infrared emitter (IRED), ambient light sensor (ALS), and proximity sensor (PS) work together.
- Parallel operation: ALS and PS can operate simultaneously.
- No dead zone: Readings are possible all the way up to the sensor face.
- Digital output: I2C interface simplifies integration with microcontrollers.
- Breadboard friendly: 0.1-inch pitch pins are pre-soldered and ready to use.
Specifications Explained
Voltage Rating (3.3V): The board is designed for 3.3V logic and power. Ensure your microcontroller provides 3.3V on the I2C bus and power pins.
I2C Address (0x60): This address is hardware defined, so each VCNL4040 on the same bus must have a unique address. To use multiple sensors, a multiplexer is required.
Detection Range (20cm): The sensor provides qualitative detection, meaning it indicates presence and relative distance changes, not precise measurements in millimeters.
Dimensions (25.4 mm x 25.4 mm): The board is compact and fits standard prototyping spaces.
Compatibility and Requirements
The breakout is compatible with any microcontroller that supports I2C and can operate at 3.3V. No soldering is required for initial use, but you will need a 3.3V power source and I2C connections (SDA, SCL). If you plan to use more than one VCNL4040 on the same bus, an I2C multiplexer is necessary because the address is fixed at 0x60.
Typical Uses
This sensor is often found in automatic towel and soap dispensers, automatic faucets, and touchless switches. It is also useful for presence detection in interactive exhibits, robotics, and any project that needs a digital light sensor. The ambient light sensor can be used separately for applications like adaptive lighting or light-triggered events.
What's in the Box
1 x SmartElex Proximity Sensor Breakout - 20cm, VCNL4040
Quick specs
- Model No. / Name
- VCNL4040
- Voltage Rating (V)
- 3.3
- I2C Address
- 0x60
- Length (mm)
- 25.4
- Width (mm)
- 25.4
- Shipping Weight
- 0.008 kg
















