
1 / 4 · Click to enlarge
AI Summary
A compact NAU7802 breakout that amplifies and digitises load cell signals, giving your microcontroller true I2C weight readings. The four-spring terminal connects a load cell without soldering, and 0.1-inch pins keep breadboard use simple.
Key Highlights
- NAU7802 24-bit dual-channel ADC with built-in programmable gain amplifier
- Converts load cell signals to true I2C output for easy microcontroller reading
- Four spring terminals accept a load cell with no soldering required
- Programmable PGA gains from 1 to 128 for small signal amplification
- External differential reference voltage range of 0.1 V to 5 V
- On-chip temperature sensor and simultaneous 50 Hz and 60 Hz rejection
Ideal For
- Makers building DIY digital scales
- Students learning about ADCs and load cells
- Engineers prototyping process control systems
- Developers adding presence detection with load cells
- Electronics hobbyists working with I2C sensors
Buying Tip
Check that your project can work with the fixed I2C address 0x2A, since multiple NAU7802 boards on one bus need a multiplexer.
Elecvora expert review
Our verdict
A tidy, well-considered breakout that turns a load cell into an I2C sensor with minimal wiring effort. It suits small-scale weighing and sensing projects where a fixed address and 3.3 V supply are acceptable.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Solder-free four-spring terminal for load cells
- 24-bit ADC with programmable gain up to 128
- True I2C output simplifies microcontroller integration
- On-chip temperature sensor and mains rejection
Cons
- Fixed I2C address 0x2A requires a multiplexer for multiple boards
- Intended for a 3.3 V supply
- Accurate weight readings depend on your own calibration
Best for
DIY scales and load cell sensing projects with an I2C microcontroller
Not ideal for
Projects needing several NAU7802 boards on one bus without a multiplexer
Specifications
| Model No. / Name | NAU7802 |
|---|---|
| Voltage Rating (V) | 3.3 |
| Reference Voltage | 0.1V to 5V |
| PCB Size ( L x W ) mm | 27.32 x 35.56 |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 5 × 5 × 2 cm |
What's in the box
- 1 x SmartElex Scale Breakout - NAU7802
Frequently Asked Questions
What is the NAU7802 Scale Breakout used for?
Do I need to solder to connect a load cell?
What supply voltage does the board need?
Can I use more than one board on the same I2C bus?
What is included with the product?
Why do my readings not match the actual weight?
Overview
The SmartElex Scale Breakout is a small, ready-to-wire board for the NAU7802, a 24-bit dual-channel analog-to-digital converter with a built-in programmable gain amplifier and I2C output. It is made for reading standard load cells, the sensors that translate pressure or force into a small electrical signal. Because that signal is usually very weak, the NAU7802 amplifies it and converts it into a digital value your microcontroller can read over I2C.
Connecting a load cell is straightforward thanks to a four-spring terminal that needs no soldering. The board also breaks out 0.1-inch spaced pins for breadboard use, plus an interrupt pin and AVDD at the edge, with the differential input signals and a second set of input signals available in the middle of the board.
Key Features
- NAU7802 24-bit dual-channel ADC for high-resolution conversion of load cell output
- Programmable gain amplifier with gains from 1 to 128 to suit small signals
- True I2C output so readings go straight to your microcontroller
- Solder-free load cell connection through a four-spring terminal
- On-chip temperature sensor for monitoring board conditions
- Simultaneous 50 Hz and 60 Hz rejection to help with mains interference
- Low power with under 1 uA standby current and programmable power management
Specifications Explained
The 3.3 V voltage rating is the supply the board is intended to run from, while the NAU7802 chip itself supports 2.7 V to 5.5 V. The external differential reference can be set anywhere from 0.1 V to 5 V, which gives you room to match the reference to your measurement setup. The 24-bit resolution and gain settings up to 128 are what allow a faint load cell signal to become a usable digital reading. The PCB measures 27.32 x 35.56 mm, so it fits neatly into compact enclosures and project boxes.
Compatibility and Requirements
You need a microcontroller with an I2C bus and a 3.3 V supply for the board. A load cell connects to the four-spring terminal without soldering. The I2C address of the NAU7802 is 0x2A and is hardware-defined, so communicating with more than one NAU7802 on a single bus requires a multiplexer. Calibration is needed to turn raw readings into accurate weight values.
Typical Uses
- DIY digital scales and weight measurement projects
- Process control where force or weight must be monitored
- Simple presence detection using a load cell
- Learning projects around ADCs, gain and I2C sensors
What's in the Box
1 x SmartElex Scale Breakout - NAU7802.
Quick specs
- Model No. / Name
- NAU7802
- Voltage Rating (V)
- 3.3
- Reference Voltage
- 0.1V to 5V
- PCB Size ( L x W ) mm
- 27.32 x 35.56
- Shipping Weight
- 0.005 kg
- Shipping Dimensions
- 5 × 5 × 2 cm
















