Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A 64-zone time-of-flight imager module that maps distance across a 63° diagonal field of view out to about 4 metres. It streams depth data over I2C at up to 60 Hz, giving robotics and IoT projects true multi-zone sensing.

Key Highlights

  • 64-pixel multizone ranging in 4x4 or 8x8 zone layouts
  • Measures up to roughly 400 cm across the field of view
  • 63° diagonal square field of view shaped by diffractive optics
  • Up to 60 Hz frame rate for responsive depth updates
  • 3.3 V supply with I2C interface at address 0x52
  • 940 nm invisible VCSEL emitter with integrated analog driver

Ideal For

  • Robotics developers adding multi-zone obstacle detection
  • IoT builders needing compact depth sensing
  • AR/VR experimenters exploring spatial awareness
  • Makers mapping rooms in 3D
  • Students learning time-of-flight sensor integration

Buying Tip

Check that your microcontroller has enough flash to hold the roughly 90 kB VL53L5CX firmware alongside your own code before you commit to this sensor.

Elecvora expert review

Our verdict

A tidy, breadboard-friendly breakout that turns a capable 64-zone ToF sensor into something you can wire up in minutes. The multizone output and wide field of view make it far more useful than a single-point rangefinder for robotics and mapping work.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • 64 zones in 4x4 or 8x8 layouts
  • Ranging up to about 400 cm
  • Up to 60 Hz frame rate
  • Wide 63-degree diagonal field of view
  • 0.1-inch pins, no soldering needed

Cons

  • Firmware must be loaded over I2C at every power-on
  • Needs a microcontroller with enough flash for the roughly 90 kB firmware
  • 3.3 V supply only

Best for

Robotics and IoT projects needing multi-zone depth data

Not ideal for

Single-point distance measurement on very constrained microcontrollers

Specifications

Model No. / NameVL53L5CX
Voltage Rating (V)3.3
I2C Address0x52
PCB Size ( L x W ) mm25.4 x 25.4
Frame Rate60
Shipping Weight0.002 kg

What's in the box

  • 1 x SmartElex ToF Imager - VL53L5CX

Frequently Asked Questions

What makes this sensor different from a simple distance sensor?
It returns a grid of 64 zones rather than one distance value, selectable as 4x4 or 8x8. That lets your project detect and locate multiple objects across the field of view.
What supply voltage does it need?
The board is rated for 3.3 V and communicates over I2C at address 0x52.
How far can it measure?
Ranging reaches approximately 400 cm across the zones, with a 63-degree diagonal square field of view.
Do I need to solder to use it?
No soldering is required for a header or breadboard connection because 0.1-inch spaced pins are already broken out. You may still solder if you prefer a permanent joint.
Why does the firmware need loading at startup?
The VL53L5CX requires its firmware to be loaded over I2C at power-on. The file is about 90 kB, so your microcontroller needs enough flash for it and your program.
What is included with the module?
The package contains 1 x SmartElex ToF Imager - VL53L5CX. Headers and cables are not listed as included.

Overview

The SmartElex ToF Imager - VL53L5CX brings ST's 64-pixel time-of-flight sensing to a ready-to-use breakout board. Instead of a single distance number, it returns a grid of measurements, selectable as 4x4 or 8x8 zones, so your project can see the shape of what is in front of it. A 940 nm invisible VCSEL emitter and integrated analog driver handle illumination, while diffractive optical elements on both transmitter and receiver form a 63-degree diagonal square field of view.

The module runs from a 3.3 V supply and communicates over I2C at address 0x52, with frame rates up to 60 Hz. Its histogram-based processing allows it to distinguish separate objects within the field of view, which is useful when more than one surface falls inside the sensing cone.

Key Features

  • Multizone output: 4x4 or 8x8 independent zones per reading.
  • Long range: measurements up to approximately 400 cm.
  • Fast updates: frame rate capability up to 60 Hz.
  • Wide coverage: 63-degree diagonal square field of view.
  • Simple wiring: 0.1-inch spaced pins for breadboard use.
  • Eye-safe emitter: 940 nm invisible light VCSEL.

Specifications Explained

Zones and field of view

The 4x4 and 8x8 zone options decide how much spatial detail you get. More zones give finer resolution across the 63-degree diagonal view, which helps when mapping a room or spotting obstacles of different sizes.

Range and frame rate

Ranging reaches about 400 cm, and the 60 Hz frame rate capability means depth data can keep pace with moving platforms. In practice, you can trade zone count against update speed to suit your application.

Electrical interface

A 3.3 V supply and I2C address 0x52 keep wiring minimal. The board measures 25.4 x 25.4 mm, matching a standard small prototyping footprint.

Compatibility and Requirements

The VL53L5CX requires its firmware to be loaded at power-on over the I2C bus. Because that firmware is around 90 kB, choose a microcontroller with enough flash to store both the sensor firmware and your own program code. The board is supplied with broken-out 0.1-inch pins, so no soldering is needed to connect it to a compatible header or breadboard.

Typical Uses

  • 3D room mapping and spatial awareness
  • Obstacle detection for robotics
  • Gesture recognition projects
  • IoT devices that need presence or distance data
  • Laser-assisted autofocus experiments
  • AR/VR enhancement work

What's in the Box

1 x SmartElex ToF Imager - VL53L5CX.

Quick specs

Model No. / Name
VL53L5CX
Voltage Rating (V)
3.3
I2C Address
0x52
PCB Size ( L x W ) mm
25.4 x 25.4
Frame Rate
60
Shipping Weight
0.002 kg
See all specifications