Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SmartElex, this smartelex movement sensors is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name LIS3DH; voltage rating (v) 1.7 to 3.6; orientation 6D/4D. Check that your power source supplies 1.7 to 3.6 before connecting it.

Key Highlights

  • Model No. / Name: LIS3DH
  • Voltage Rating (V): 1.7 to 3.6
  • Orientation: 6D/4D

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameLIS3DH
Voltage Rating (V)1.7 to 3.6
Orientation6D/4D
PCB Size ( L x W ) mm12.7 x 22.88
Shipping Weight0.01 kg
Shipping Dimensions5 × 4 × 2 cm

Overview

The SmartElex Triple Axis Accelerometer Breakout - LIS3DH, made by SmartElex, is listed in our smartelex movement sensors range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: LIS3DH
  • Voltage Rating (V): 1.7 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Orientation: 6D/4D
  • PCB Size ( L x W ) mm: 12.7 x 22.88 (measure your mounting space before ordering)
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 5 × 4 × 2 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The LIS3DH Breakout is a smart, low-power, three-axis, capacitive micro-machined accelerometer with 12 bits of resolution that you can use to add translation detection to your project. It would be classified as a 3DoF, or 3 Degrees of Freedom. Inertial Measurement Units (or IMUs) can provide additional space location data, such as gyroscopic or magnetometric. The LIS3DH provided on this breakout operates under the same principles but gives a few analog inputs to play with, and it has some built-in movement detection abilities. The LIS3DH from STMicroelectronics is easy to set up; just wire up your choice of interface (SPI or I2C), supply 3.3V, and ground. This sensor works nicely with a breadboard for easy connection, and, because it gives some mass to the accelerometer, it more closely matches what might be expected from a project or cellphone. The LIS3DH Breakout is a 3.3V device! Supplying voltages greater than ~3.6V can permanently damage the IC. As long as your Arduino has a 3.3V supply output, and you're fine with using I2C, you shouldn't need any extra level shifting. But if you want to use SPI, you may need a level shifter.


Features:

  1. Model - LIS3DH(ultra-low-power high-performance 3-axis "nano" accelerometer)
  2. Supply Voltage - 1.7V--3.6V
  3. Three Modes: Power-Down, Normal, Low-Power
  4. ±2g/±4g/±8g/±16g Dynamically Selectable Fullscale
  5. 10bit, 32-Level FIFO
  6. 6D/4D Orientation

Package Includes:

1 x SmartElex Triple Axis Accelerometer Breakout - LIS3DH

Quick specs

Model No. / Name
LIS3DH
Voltage Rating (V)
1.7 to 3.6
Orientation
6D/4D
PCB Size ( L x W ) mm
12.7 x 22.88
Shipping Weight
0.01 kg
Shipping Dimensions
5 × 4 × 2 cm
See all specifications