Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SparkFun, this sparkfun modules is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Pressure Sensor; supply voltage 1.71V - 3.6V; current drawn 260µA - Max draw during measurements 1.3µA - at 1 Hz in Low Power Mode 0.55µA - Absolute minimum in Deep Standby mode. Check that your power source supplies 1.71V - 3.6V before connecting it.

Key Highlights

  • Model No. / Name: Pressure Sensor
  • Supply Voltage: 1.71V - 3.6V
  • Current Drawn: 260µA - Max draw during measurements 1.3µA - at 1 Hz in Low Power Mode 0.55µA - Absolute minimum in Deep Standby mode

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NamePressure Sensor
Supply Voltage1.71V - 3.6V
Current Drawn260µA - Max draw during measurements 1.3µA - at 1 Hz in Low Power Mode 0.55µA - Absolute minimum in Deep Standby mode
Data Transfer RateI2C - 1MHz SPI - 12MHz
Non-Volatile Memory6-bytes
Sensing range30 - 125kPa
ResolutionPressure Data Resolution: 1/64Pa
Absolute accuracy±0.5hPa
Sensing Temperature (°C)-40 - 85 °C
Output Data Rate0.125 - 240Hz (Normal Mode)
Output Data622Hz (Continuous Mode, 1x Oversampling)
I2C Address0x47 (Default), 0x46 (Alternate)
Shipping Weight0.03 kg
Shipping Dimensions10 × 6 × 2 cm

Overview

The SparkFun BMP581 Pressure Sensor (Qwiic), made by SparkFun, is listed in our sparkfun modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Pressure Sensor
  • Supply Voltage: 1.71V - 3.6V (match this to your power supply; too high a voltage can damage the part)
  • Current Drawn: 260µA - Max draw during measurements 1.3µA - at 1 Hz in Low Power Mode 0.55µA - Absolute minimum in Deep Standby mode (your supply must deliver at least this much current)
  • Data Transfer Rate: I2C - 1MHz SPI - 12MHz (make sure the rest of your system works at this frequency)
  • Non-Volatile Memory: 6-bytes (more memory leaves room for larger programs and buffers)
  • Sensing range: 30 - 125kPa (quoted range is usually line-of-sight; walls and interference shorten it)
  • Resolution: Pressure Data Resolution: 1/64Pa
  • Absolute accuracy: ±0.5hPa

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The SparkFun Qwiic BMP581 Pressure Sensor is a standard-sized, . absolute pressure sensor breakout from Bosch Sensortec. The BMP581 boasts exceptional resolution (down to 1/64Pa) and accuracy while maintaining on-chip linearization and temperature compensation to provide true absolute data for pressure and temperature. The Qwiic Pressure Sensor communicates over I2C by default, utilizing our handy Qwiic Connect System so no soldering is required to connect it to the rest of your boards. However, we still routed the I2C signals out to a set of 0.1”-spaced pins for users who prefer a soldered connection. You can also configure the board to communicate over SPI using the same 0.1"-spaced pins.

Features:

  1. The BMP581 has a wide pressure sensing range (30 to 125kPa)
  2. The sensor includes a configurable oversampling setting, FIFO buffer for storing up to 32 pressure samples
  3. This allows you to customize the performance based on your application's requirements.
  4.  Even without filtering, the BMP581 has very low noise (< 0.1Pa RMS)

Package Includes:

1 x SparkFun Pressure Sensor - BMP581 (Qwiic)

Quick specs

Model No. / Name
Pressure Sensor
Supply Voltage
1.71V - 3.6V
Current Drawn
260µA - Max draw during measurements 1.3µA - at 1 Hz in Low Power Mode 0.55µA - Absolute minimum in Deep Standby mode
Data Transfer Rate
I2C - 1MHz SPI - 12MHz
Non-Volatile Memory
6-bytes
Sensing range
30 - 125kPa
See all specifications