Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

The SparkFun SHTC3 breakout is a digital I2C humidity and temperature sensor with ±2 %RH and ±0.2 °C typical accuracy. Two Qwiic connectors let you add precise climate sensing to a project with a single cable.

Key Highlights

  • Digital SHTC3 sensor reports humidity and temperature over I2C
  • Typical accuracy of ±2 %RH and ±0.2 °C with 0.01 resolution
  • Two Qwiic connectors for fast, solder-free daisy-chain wiring
  • Wide 1.62 to 3.6 VDC input; 3.3 V typical via Qwiic cable
  • Low current draw from 4.9 µA in normal mode
  • Humidity range 0–100% RH and temperature range -40 to +125 °C

Ideal For

  • Makers building greenhouse or grow-room climate loggers
  • Hobbyists adding humidity and temperature sensing to weather stations
  • Electronics learners exploring I2C sensors on a Qwiic chain
  • Builders of humidor or storage monitoring systems
  • Developers prototyping low-power environmental data nodes

Buying Tip

Check that your host board has a Qwiic connector or free I2C pins at address 0x70, and remember the board needs a 1.62–3.6 VDC supply, typically 3.3 V from a Qwiic cable.

Elecvora expert review

Our verdict

The SHTC3 breakout is a tidy, accurate sensor board that removes most of the wiring friction from climate sensing. Its Qwiic connectors and low current draw make it a sensible choice for logged and battery-powered projects.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • ±2 %RH and ±0.2 °C typical accuracy with fine 0.01 resolution
  • Two Qwiic connectors allow solder-free daisy-chaining
  • Low current draw, with a low-power mode for battery builds
  • Wide 1.62–3.6 VDC supply range

Cons

  • Requires a Qwiic-compatible host or direct I2C wiring
  • Fixed I2C address 0x70 limits multiple identical sensors on one bus

Best for

Climate logging and environmental monitoring projects

Not ideal for

Applications needing sensor redundancy on a single I2C bus

Specifications

Item TypeSensor
Model No. / NameHumidity Sensor
Rated Voltage (VDC)1.62 to 3.6
InterfaceI2C Address: 0x70 2x Qwiic Connectors
Operating Voltage (V)Typically 3.3V if using the Qwiic cable
Additional Specs.Humidity: Operating range: 0% to 100%, Typical accuracy: ±2 %RH, Resolution: 0.01 %RH Temperature: Operating range: -40°C to +125 °C, Typical accuracy: ±0.2 °C, Resolution: 0.01 °C
Current consumption4.9µA to 430µA (Normal Mode) Typical 0.5µA to 270µA (Low Power Mode) Typical
Shipping Weight0.02 kg
Shipping Dimensions10 × 6 × 1 cm

What's in the box

  • 1 x SparkFun Humidity Sensor Breakout - SHTC3 (Qwiic)

Frequently Asked Questions

What does the SHTC3 breakout measure?
It measures relative humidity from 0% to 100% and temperature from -40 °C to +125 °C, reporting both over I2C.
How do I connect it to my board?
Use a Qwiic cable into either of the two Qwiic connectors, or wire the I2C pins directly if your board has no Qwiic port.
What voltage does it need?
The board accepts 1.62 to 3.6 VDC, and a Qwiic cable typically supplies 3.3 V.
What I2C address does it use?
It uses the fixed address 0x70, so check that nothing else on your bus uses the same address.
How much current does it draw?
Typical draw is 4.9 µA to 430 µA in normal mode and 0.5 µA to 270 µA in low-power mode.
What is included with the product?
The package contains 1 x SparkFun Humidity Sensor Breakout - SHTC3 (Qwiic); cables and host boards are not included.

Overview

The SparkFun SHTC3 Humidity Sensor Breakout puts a digital humidity and temperature sensor on a small board that is ready to connect. The SHTC3 handles both measurements internally and reports them over I2C at address 0x70, so your microcontroller only needs two signal lines to read climate data. Two Qwiic connectors are broken out on the board, which means you can link it into a Qwiic chain with a single cable and no soldering.

Accuracy is strong for a sensor of this size: ±2 %RH typical for humidity and ±0.2 °C typical for temperature, each with 0.01 resolution. That makes the breakout useful for projects where small changes matter, such as greenhouse logging, humidor control or a weather station.

Key Features

  • Combined sensing: humidity and temperature from one SHTC3 chip
  • I2C interface: fixed address 0x70 for simple bus setup
  • Qwiic ready: two connectors for daisy-chaining without soldering
  • Flexible supply: 1.62 to 3.6 VDC, typically 3.3 V through a Qwiic cable
  • Low power: 4.9 µA to 430 µA typical in normal mode, 0.5 µA to 270 µA typical in low-power mode

Specifications Explained

Humidity performance

The sensor covers the full 0% to 100% relative humidity range with ±2 %RH typical accuracy and 0.01 %RH resolution. In practice, that means it can follow slow drifts in a room, a grow tent or a storage box and still register fine changes.

Temperature performance

Temperature is measured from -40 °C to +125 °C with ±0.2 °C typical accuracy and 0.01 °C resolution, covering indoor and outdoor conditions as well as harsher environments.

Power and current

The board runs from 1.62 to 3.6 VDC. With a Qwiic cable the usual supply is 3.3 V. Current consumption ranges from 4.9 µA to 430 µA typical in normal mode and 0.5 µA to 270 µA typical in low-power mode, which helps battery-powered builds.

Compatibility and Requirements

The breakout uses I2C at address 0x70 and connects through Qwiic cables to Qwiic-compatible boards. If you are not using a Qwiic host, the I2C pins can be wired directly. Power must stay within 1.62 to 3.6 VDC; a Qwiic cable typically supplies 3.3 V. No other accessories are required beyond a host board and a suitable cable.

Typical Uses

  • Greenhouse and grow-room climate logging
  • Humidor monitoring and control
  • Weather station temperature and humidity data
  • Indoor environmental sensing and data collection

What's in the Box

1 x SparkFun Humidity Sensor Breakout - SHTC3 (Qwiic).

Quick specs

Item Type
Sensor
Model No. / Name
Humidity Sensor
Rated Voltage (VDC)
1.62 to 3.6
Interface
I2C Address: 0x70 2x Qwiic Connectors
Operating Voltage (V)
Typically 3.3V if using the Qwiic cable
Additional Specs.
Humidity: Operating range: 0% to 100%, Typical accuracy: ±2 %RH, Resolution: 0.01 %RH Temperature: Operating range: -40°C to +125 °C, Typical accuracy: ±0.2 °C, Resolution: 0.01 °C
See all specifications