Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SparkFun, this sparkfun modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Pressure Sensor; model no. / name MPL3115A2; rated voltage (vdc) 1.95 to 3.6. Check that your power source supplies 1.95 to 3.6 before connecting it.

Key Highlights

  • Item Type: Pressure Sensor
  • Model No. / Name: MPL3115A2
  • Rated Voltage (VDC): 1.95 to 3.6

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypePressure Sensor
Model No. / NameMPL3115A2
Rated Voltage (VDC)1.95 to 3.6
Max. Clock Frequency (MHz)4
Operating Temperature (°C)-40 to 85
Pressure Range (MPa)50 to 110KPa
Length (mm)20
Width (mm)10
Weight (g)2
Shipping Weight0.005 kg
Shipping Dimensions5.5 × 4 × 1 cm

Overview

The SparkFun SEN-11084 Altitude/Pressure Sensor Breakout - MPL3115A2, made by SparkFun, is listed in our sparkfun modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Pressure Sensor
  • Model No. / Name: MPL3115A2
  • Rated Voltage (VDC): 1.95 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Max. Clock Frequency (MHz): 4 (make sure the rest of your system works at this frequency)
  • Operating Temperature (°C): -40 to 85
  • Pressure Range (MPa): 50 to 110KPa (quoted range is usually line-of-sight; walls and interference shorten it)
  • Length (mm): 20 (measure your mounting space before ordering)
  • Width (mm): 10 (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The MPL3115A2 is a MEMS pressure sensor that provides Altitude data to within 30cm (with oversampling enabled). The sensor outputs are digitized by a high-resolution 24-bit ADC and transmitted over I2C, meaning it's easy to interface with most controllers. Pressure output can be resolved with output in fractions of a Pascal, and Altitude can be resolved in fractions of a meter. The device also provides 12-bit temperature measurements in degrees Celsius.

This breakout board makes it easy to prototype using this tiny device by breaking out the necessary pins to a standard 0.1" spaced header. The board also has all of the passive components needed to get the device functioning, so you can simply connect it to something that talks I2C and get to work.

Application:
  1. High Accuracy Altimetry
  2. Smartphones/Tablets
  3. Personal Electronics Altimetry
  4. GPS Dead Reckoning
  5. GPS Enhancement for Emergency Services
  6. Map Assist, Navigation
  7. Weather Station Equipment

Features:

  1. Fully Compensated internally
  2. Programmable Events
  3. Autonomous Data Acquisition

Package Includes:

1 x SparkFun Altitude/Pressure Sensor Breakout - MPL3115A2

Quick specs

Item Type
Pressure Sensor
Model No. / Name
MPL3115A2
Rated Voltage (VDC)
1.95 to 3.6
Max. Clock Frequency (MHz)
4
Operating Temperature (°C)
-40 to 85
Pressure Range (MPa)
50 to 110KPa
See all specifications