Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SparkFun, this sparkfun modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Current Sensor; model no. / name Current Sensor Breakout; operating voltage (v) 5. Check that your power source supplies 5 before connecting it.

Key Highlights

  • Item Type: Current Sensor
  • Model No. / Name: Current Sensor Breakout
  • Operating Voltage (V): 5

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeCurrent Sensor
Model No. / NameCurrent Sensor Breakout
Operating Voltage (V)5
Current-Sensing(A)10mA up to 5A (AC and DC)
Length (mm)25
Width (mm)16
Weight (g)1 (approx)
Shipping Weight0.01 kg
Shipping Dimensions4 × 3 × 1 cm

Overview

The SparkFun SEN-13679 Current Sensor Breakout - ACS723, made by SparkFun, is listed in our sparkfun modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Current Sensor (your supply must deliver at least this much current)
  • Model No. / Name: Current Sensor Breakout (your supply must deliver at least this much current)
  • Operating Voltage (V): 5 (match this to your power supply; too high a voltage can damage the part)
  • Current-Sensing(A): 10mA up to 5A (AC and DC) (your supply must deliver at least this much current)
  • Length (mm): 25 (measure your mounting space before ordering)
  • Width (mm): 16 (measure your mounting space before ordering)
  • Weight (g): 1 (approx) (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The SparkFun Current Sensor Breakout - ACS723 is a high accuracy board that utilizes the ACS723 for moderate AC and DC current sensing applications. The ACS723 sensor uses a Hall effect sensor to output a voltage relative to the current flowing through the IP+ and IP- pins on the board. The advantage of using a Hall effect sensor, specifically, is that the circuit being sensed and the circuit reading the sensor are electrically isolated meaning that, although your Arduino is running on 5V, the sensed circuit can be operating at higher DC or AC voltages!

The SparkFun Current Sensor Breakout measures both DC and AC currents all the way up to 5A, has full electrical isolation of measured and sensed circuits, and has a base sensitivity of 400mV/A. Although the analog output is adjustable to 80kHz, the bandwidth on the ACS723 Sensor Breakout width filter has been set to 20kHz to reduce noise when using at high gains. The full 80KHz bandwidth that the sensor is capable of can be recovered by closing the JP1 (Bandwidth Select) jumper on the back of the board.

Note: Although the chip itself is rated for up to 2.4kV (RMS) of isolation, the board has not been designed for such high voltage applications.

How to Use?

Hookup guide click here!

Pin Description:

Symbol Description
IP+ High side of current sensor
IP- Low side of current sensor
GND Must be connected to ground
Vo Voltage output proportional to current flowing through IP+ and IP-
VCC 5V power supply

Features:

  1. Analog output with bandwidth adjustable to 80kHz.
  2. The bandwidth on the ACS723 Sensor Breakout width filter has been set to 20kHz to reduce noise when using at high gains. The full 80KHz bandwidth that the sensor is capable of can be recovered by closing the JP1 (Bandwidth Select) jumper on the back of the board. See either the ACS723 schematic or the ACS723 Low Current schematic for more details.
  3. Measures DC and AC currents.
  4. Full electrical isolation of measured and sensed circuits.
  5. The version without the op-amp has a base sensitivity of 400mV/A.

Package Includes:

1 x SparkFun Current Sensor Breakout - ACS723.

Quick specs

Item Type
Current Sensor
Model No. / Name
Current Sensor Breakout
Operating Voltage (V)
5
Current-Sensing(A)
10mA up to 5A (AC and DC)
Length (mm)
25
Width (mm)
16
See all specifications