
1 / 3 · Click to enlarge
AI Summary
The SparkFun SEN-13879 is an HX711 breakout board that lets any microcontroller read load cells for accurate weight measurement. It offers selectable 10SPS or 80SPS output, dual input channels, and a low-noise PGA with gain up to 128.
Key Highlights
- HX711 IC for reading four-wire load cells
- Selectable 10SPS or 80SPS output data rate
- On-chip low-noise PGA with gain of 32, 64, or 128
- Two selectable differential input channels
- Simple two-wire interface works with any GPIO
- Compact 30mm x 23mm board weighs about 10g
Ideal For
- Makers building custom digital scales
- Students learning about load cells and signal amplification
- Engineers prototyping weight-based process control
- Hobbyists creating presence detection systems
Buying Tip
Remember that the HX711 requires calibration with a known weight to deliver accurate readings, so plan for a calibration step in your project.
Elecvora expert review
Our verdict
The SparkFun SEN-13879 HX711 breakout is a reliable and compact solution for reading load cells, with useful additions like separate analog and digital supplies and filtering components. It is well suited to hobbyist and educational projects that need accurate weight measurement without complex wiring.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Simple two-wire interface works with any microcontroller
- Selectable gain and data rate for flexibility
- On-board filtering for cleaner digital supply
- Compact and lightweight design
Cons
- Requires soldering to connect wires or headers
- Needs calibration with a known weight for accurate results
- Load cell not included
Best for
Makers and engineers building custom weight measurement systems
Not ideal for
Plug-and-play applications that require no soldering or calibration
Specifications
| Max. Operating Current (A) | <1.5mA |
|---|---|
| Output Data Rate | 10SPS or 80SPS |
| Length (mm) | 30 |
| Width (mm) | 23 |
| Weight (g) | 10 |
| Shipping Weight | 0.01 kg |
| Shipping Dimensions | 3 × 3 × 1 cm |
What's in the box
- 1 x SparkFun Load Cell Amp (SEN-13879)
Frequently Asked Questions
What load cells can I use with this amplifier?
Do I need to calibrate the amplifier?
What is the power supply requirement?
Does this board come with a load cell?
How do I connect it to my Arduino?
What is the purpose of the yellow wire on the load cell?
Overview
The SparkFun SEN-13879 Load Cell Amplifier is a small breakout board for the HX711 IC, created to help you read load cells and measure weight with a microcontroller. Load cells use a four-wire Wheatstone bridge configuration, and the HX711 amplifies the tiny differential voltage they produce into a digital value your project can process. With some calibration, you can achieve accurate weight readings for applications such as digital scales, process control, or presence detection.
This version of the SparkFun Load Cell Amplifier includes separate analog and digital supplies, plus a 3.3uH inductor and a 0.1uF filter capacitor on the digital supply for cleaner operation. The board measures 30mm by 23mm and weighs approximately 10g, making it easy to fit into compact builds.
Key Features
- HX711 IC: dedicated load cell amplifier with on-chip oscillator and power-on reset.
- Selectable output data rate: choose 10SPS for stable readings or 80SPS for faster updates.
- Low-noise PGA: selectable gain of 32, 64, or 128 to match different load cell sensitivities.
- Dual differential input channels: two selectable channels for flexible sensor arrangements.
- Simple digital interface: two-wire clock and data connection works with any microcontroller GPIO pins.
- On-chip supply regulator: provides power for the load cell and ADC analog supply.
- Supply rejection: simultaneous 50Hz and 60Hz rejection helps reduce mains interference.
Specifications Explained
The maximum operating current of under 1.5mA means the board is well suited to battery-powered or low-power projects. The output data rate of 10SPS or 80SPS lets you balance noise performance against update speed: 10SPS is ideal for steady weight readings, while 80SPS suits applications needing quicker response. The 30mm length and 23mm width give you a compact footprint, and the 10g weight keeps your build light. The on-chip PGA with gain of 32, 64, or 128 allows you to amplify weak load cell signals without external components.
Compatibility and Requirements
The HX711 uses a two-wire interface (Clock and Data), and any microcontroller's GPIO pins should work. Numerous libraries are available to help you read data from the HX711. A load cell with a four-wire Wheatstone bridge configuration is required. Common wire colours are red (excitation+ or VCC), black (excitation- or GND), white (amplifier- or output-), green (A+ or output+), and yellow (shield). The yellow pin is an optional input for grounding and shielding against electromagnetic interference; it is not connected to the strain gauge. Some load cells may have slight colour-coding variations, so always verify with your load cell's datasheet.
Typical Uses
- DIY digital scales and kitchen scales
- Industrial process control and monitoring
- Presence detection via weight sensing
- Educational projects and prototyping
- Inventory or force measurement setups
What's in the Box
1 x SparkFun Load Cell Amp (SEN-13879).
Quick specs
- Max. Operating Current (A)
- <1.5mA
- Output Data Rate
- 10SPS or 80SPS
- Length (mm)
- 30
- Width (mm)
- 23
- Weight (g)
- 10
- Shipping Weight
- 0.01 kg


















