Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by SparkFun, this sparkfun modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Sensor; model no. / name Temperature Sensor; rated voltage (vdc) 1.5 to 3.6. Check that your power source supplies 1.5 to 3.6 before connecting it.

Key Highlights

  • Item Type: Sensor
  • Model No. / Name: Temperature Sensor
  • Rated Voltage (VDC): 1.5 to 3.6

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeSensor
Model No. / NameTemperature Sensor
Rated Voltage (VDC)1.5 to 3.6
InterfaceI2C
Operating Temperature (°C): -40°C to +125°C
Typical accuracy (°C)± 0.5°C (-10°C to +60°C) max
Operating Voltage (V)Typically 3.3V if using the Qwiic cable
Shipping Weight0.03 kg
Shipping Dimensions10 × 6 × 3 cm

Overview

The SparkFun STTS22H Temperature Sensor (Qwiic), made by SparkFun, is listed in our sparkfun modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Sensor
  • Model No. / Name: Temperature Sensor
  • Rated Voltage (VDC): 1.5 to 3.6 (match this to your power supply; too high a voltage can damage the part)
  • Interface: I2C (confirm your cable or board uses the same connector)
  • Operating Temperature (°C): : -40°C to +125°C
  • Typical accuracy (°C): ± 0.5°C (-10°C to +60°C) max
  • Operating Voltage (V): Typically 3.3V if using the Qwiic cable (match this to your power supply; too high a voltage can damage the part)
  • Shipping Weight: 0.03 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The SparkFun STTS22H Temperature Sensor is a Qwiic-enabled breakout board based on the ultralow-power, high-accuracy, digital temperature sensor from ST Microelectronics and housed in our standard Qwiic form factor. Thanks to its factory calibration the STTS22H offers high-end accuracy performance over the entire operating temperature range, reaching as low as ±0.5°C without requiring any further calibration at the application level. The sensor operating mode is user-configurable and allows selecting between different ODRs (down to 1Hz) or the one-shot mode for battery saving. In one-shot mode, the sensor current consumption falls to 1.75µA. Peripheral addresses are also user-configurable and allow up to four different addresses to be specified by manipulating the jumpers on the back of the breakout. In addition, an interrupt pin is available to signal the application whenever the user-selectable high or low threshold has been exceeded.

Features:

  1. Easy to use
  2. Easy to connect
  3. Good quality Product

Package Includes:

1 x SparkFun Temperature Sensor - STTS22H (Qwiic)

Quick specs

Item Type
Sensor
Model No. / Name
Temperature Sensor
Rated Voltage (VDC)
1.5 to 3.6
Interface
I2C
Operating Temperature (°C)
: -40°C to +125°C
Typical accuracy (°C)
± 0.5°C (-10°C to +60°C) max
See all specifications