Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by STMicroelectronics, this linear voltage regulator ic is a good fit for everyday home and hobby use. Main specs: manufacturer STMicroelectronics; output type Fixed; input voltage (v) 6.5-15V. Check that your power source supplies 6.5-15V before connecting it.

Key Highlights

  • Manufacturer: STMicroelectronics
  • Output Type: Fixed
  • Input Voltage (V): 6.5-15V

Ideal For

  • Everyday use

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

ManufacturerSTMicroelectronics
Output TypeFixed
Input Voltage (V)6.5-15V
No. of Outputs1
Output Voltage5
Max. Operating Current (A)800mA
Case/PackageSOT 223
No. of Pins3
Mounting TypeSurface Mount
Operating Temperature (°C)0-125
Product Range5V 800mA LDO Voltage Regulators
Shipping Weight0.001 kg
Shipping Dimensions1 × 1 × 1 cm

Overview

The LD1117S50TR STMICROELECTRONICS Fixed LDO Voltage Regulator, 6.5V to 15V, 1.1V Dropout, 5Vout, 800mAout, SOT-223-3, made by STMicroelectronics, is listed in our linear voltage regulator ic range and suits everyday home and hobby use. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Manufacturer: STMicroelectronics
  • Output Type: Fixed
  • Input Voltage (V): 6.5-15V (match this to your power supply; too high a voltage can damage the part)
  • No. of Outputs: 1
  • Output Voltage: 5 (match this to your power supply; too high a voltage can damage the part)
  • Max. Operating Current (A): 800mA (your supply must deliver at least this much current)
  • Case/Package: SOT 223
  • No. of Pins: 3

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The LD1117 is a low-drop voltage regulator able to provide up to 800 mA of output current. The SOT223 and DPAK surface mount packages optimize the thermal characteristics even offering a relevant space-saving effect. High efficiency is assured by the NPN pass transistor. In fact in this case, unlike than PNP one, the quiescent current flows mostly into the load. Only a very common 10µF minimum capacitor is needed for stability. On-chip trimming allows the regulator to reach a very tight output voltage tolerance, within ±1% at 25°C. Note: For more technical details go through Datasheet in the attachment section.

Features:

  1. Low dropout voltage (1V typical)
  2. 2.85V device performances are suitable for SCSI-2 active termination
  3. Adjustable version availability (VREF= 1.25V)
  4. Internal current and thermal limit
  5. Available in ±1% (at 25°C) and 2% in full temperature range
  6. 75dB Supply voltage rejection

Package Includes:

1 x LD1117S50TR STMICROELECTRONICS Fixed LDO Voltage Regulator, 6.5V to 15V, 1.1V Dropout, 5Vout, 800mAout, SOT-223-3

Quick specs

Manufacturer
STMicroelectronics
Output Type
Fixed
Input Voltage (V)
6.5-15V
No. of Outputs
1
Output Voltage
5
Max. Operating Current (A)
800mA
See all specifications