
1 / 4 · Click to enlarge
AI Summary
A compact 12mm red laser module that projects an adjustable cross-line pattern from a 650nm, 5mW diode in a metal housing. Wire the red and black leads to a 3V-5V DC supply and it is ready for electronics, sensing and alignment work.
Key Highlights
- Projects a cross-line pattern, not a single dot or line
- 650nm red wavelength at 5mW output power
- 12mm diameter metal housing with 35mm body length
- Lens ring allows focus and line intensity adjustment
- Red anode and black cathode flying leads for simple wiring
- Runs from a 3V to 5V DC supply
Ideal For
- Electronics hobbyists building laser sensing circuits
- Makers creating laser harp or light-trigger projects
- Users working with Ciclop scanner or 3D printer setups
- DIY alignment and reference-cross applications
- Component buyers sourcing compact red laser modules
Buying Tip
Check that your supply stays within 3V to 5V DC and confirm polarity before powering up, since reversed leads can damage the diode.
Elecvora expert review
Our verdict
A tidy little cross-line module that does one job well: projecting an adjustable red cross from a compact metal body. It is a bare component, so expect to supply power and mounting yourself.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Cross-line pattern suits alignment and reference work
- Adjustable lens ring for focus and line intensity
- Compact 12mm metal housing
- Simple two-wire connection
- Runs on a common 3V to 5V DC range
Cons
- No power supply, goggles or mount included
- Short cable stub limits placement without extension
- Very short leads and small body need care when soldering
Best for
Electronics and maker projects needing a visible red cross reference
Not ideal for
Anyone wanting a plug-and-play finished laser device
Specifications
| Item Type | Laser Module |
|---|---|
| Cable Length | ~13.5 |
| Length (mm) | 35 |
| Width (mm) | 12 |
| Wavelength | 650 |
| Housing Material | Metal |
| Output Power | 5mW |
| Shipping Weight | 0.018 kg |
| Shipping Dimensions | 8 × 8 × 6 cm |
What's in the box
- 1 x SYD1230 12mm 5mW cross-line laser module - red
Frequently Asked Questions
Does this module project a dot or a line?
What voltage does it need?
Which lead is positive?
Can I adjust the projected cross?
What is included in the package?
Is eye protection necessary?
Overview
The SYD1230 is a small red laser module built around a 650nm diode with a 5mW output. What sets it apart from a standard pointer-style module is the optics: instead of a dot, it projects a cross-line pattern, which makes it useful wherever you need a visible reference cross rather than a single point of light. The emitter sits in a metal housing 12mm in diameter and 35mm long, with about 13.5mm of cable already attached.
This is a component, not a finished consumer device. You supply the power and the mounting, and the module does the rest.
Key Features
- Cross-line projection: the output is a red cross pattern, suited to alignment and reference tasks.
- Adjustable lens ring: turn the ring at the head to tune focus and the intensity of the projected line.
- Metal body: a rigid housing that holds the diode and optics in alignment.
- Simple two-wire hookup: red lead is the anode, black lead is the cathode.
- Compact footprint: 12mm diameter and 35mm length fit into small brackets and enclosures.
Specifications Explained
Wavelength and power
The 650nm wavelength places the beam in the visible red part of the spectrum, so the cross is easy to see against most surfaces in normal indoor lighting. The 5mW output is modest but clearly visible, which is why eye protection still matters during testing and use.
Size and mounting
At 12mm across, the module suits mounts and holders built for that diameter. The 35mm body length and short cable stub mean you should plan your wiring and strain relief before fixing the module in place.
Electrical supply
The module is designed for a 3V to 5V DC supply. Match your source to that range and observe polarity: red to positive, black to negative.
Compatibility and Requirements
You will need a DC power source within the 3V to 5V range and a way to connect the two flying leads, such as a breadboard, terminal block or soldered joint. The module is described for use in Ciclop scanner and 3D printer contexts, and it can be paired with diode tubes for other projects. No driver board, lens accessory or mounting bracket is included.
Typical Uses
- Laser sensing experiments, including radiation-sensor style builds
- Laser harp projects driven by a development board such as Arduino
- Alignment and reference crosses on 3D scanner or printer setups
- General electronics and maker projects needing a visible red cross
What's in the Box
One SYD1230 12mm 5mW cross-line red laser module. Power supply, goggles and mounting hardware are not included.
Quick specs
- Item Type
- Laser Module
- Cable Length
- ~13.5
- Length (mm)
- 35
- Width (mm)
- 12
- Wavelength
- 650
- Housing Material
- Metal

















