Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact TM1638 module that combines an 8-digit 7-segment display, 8 LEDs and 8 buttons, controlled through just three microcontroller pins. It simplifies adding a full user interface to your project without consuming extra I/O.

Key Highlights

  • 8-digit 7-segment LED display with common-cathode wiring
  • 8 individual LEDs and 8 push buttons on one board
  • 3-wire control: STB, CLK, DIO save MCU pins
  • Wide 7.0V–13.6V DC operating voltage range
  • Compact 76 x 50 x 10 mm PCB, weighs only 27 g
  • Supports 8 brightness levels for display and LEDs

Ideal For

  • Arduino and STM32 enthusiasts building custom interfaces
  • Electronics students learning serial display control
  • Makers creating scoreboards or timers
  • DIY control panel builders
  • Educators demonstrating key scanning and multiplexing

Buying Tip

Check that your project can supply 7–13.6V DC at around 0.24A and that you have three free I/O pins for the serial interface.

Elecvora expert review

Our verdict

The TM1638 module is a practical, no-fuss solution for adding a complete display and keypad interface to a project. Its three-wire control and wide voltage range make it adaptable, though the 12V nominal input may require a separate supply in 5V systems.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Saves microcontroller I/O pins with three-wire control
  • Integrated display, LEDs and buttons reduce wiring
  • Wide operating voltage range
  • Compact and lightweight
  • Supports cascading for larger setups

Cons

  • Requires a 7–13.6V DC supply, not 5V direct
  • No detailed datasheet or sample code included
  • Buttons and display share brightness setting

Best for

Makers and engineers needing a ready-made HMI with minimal pin usage

Not ideal for

Projects limited to a 5V-only power rail without a boost converter

Specifications

Model No. / NameLED Display Module
Rated Voltage (VDC)12
Operating Voltage (VDC)DC 7.0V-13.6V
Input current0.24A
Rated Speed (RPM)9500RPM
Operating Temperature (°C)-10°C ~ 70°C
Dimensions (L x W x H) mm76 x 50 x 10mm
Weight (g)27
Shipping Weight0.05 kg
Shipping Dimensions10 × 7 × 4 cm

What's in the box

  • 1 x TM1638 Button Digital LED Display Module

Frequently Asked Questions

What is the operating voltage of this module?
The module operates from DC 7.0V to 13.6V, with a rated voltage of 12V. Do not exceed 13.6V.
How many I/O pins does it require?
It requires three pins: STB, CLK and DIO. Power and ground are also needed.
Can I connect it directly to a 5V Arduino?
The control lines are compatible with 5V logic, but the module itself needs a 7–13.6V power supply. You may need a separate supply for the module.
What is included in the package?
The package includes one TM1638 Button Digital LED Display Module. No cables or power supply are included.
Can I use multiple modules together?
Yes, up to six identical modules can be cascaded for extended displays or keypads.
How do I control the brightness?
The TM1638 chip supports 8 brightness levels, adjustable via software commands.

Overview

The TM1638 Button Digital LED Display Module is a complete human-machine interface board that integrates an 8-digit 7-segment LED display, eight discrete LEDs and eight tactile push buttons. At its core is the TM1638 controller, which manages display multiplexing and key scanning autonomously. This means your main microcontroller does not need to spend cycles refreshing the display or polling the buttons. Instead, you simply send display data or read key registers over a three-wire serial interface. The module is ideal for projects where panel space is limited and I/O pins are precious.

Key Features

  • Integrated interface: 8-digit 7-segment display, 8 LEDs and 8 keys on a single PCB.
  • Three-wire control: Only STB, CLK and DIO lines are required to communicate with the module.
  • Brightness control: The display and LEDs support 8 levels of brightness adjustment.
  • Wide operating voltage: Accepts DC 7.0V to 13.6V, suitable for 12V systems and beyond.
  • Compact size: Measuring 76 x 50 x 10 mm and weighing 27 g, it fits easily into small enclosures.
  • Cascading support: Up to six identical modules can be chained together for larger displays or keypads.

Specifications Explained

Rated voltage (12V DC): The module is designed to run from a 12V nominal supply, but it tolerates a range from 7.0V to 13.6V, giving flexibility with battery or adapter-powered systems.

Input current (0.24A): At 12V, the module draws approximately 240 mA, which is modest and within the capability of most bench supplies and small batteries.

Operating temperature (-10°C to 70°C): Suitable for indoor and sheltered outdoor use in most climates.

Dimensions and weight: The 76 x 50 x 10 mm board and 27 g weight make it lightweight and easy to mount.

Compatibility and Requirements

The module requires a microcontroller with at least three free I/O pins for the STB, CLK and DIO signals. It is commonly used with STC microcontrollers and other 5V logic devices. Power must be supplied within the 7.0V–13.6V DC range; do not exceed 13.6V. The 7-segment display is common-cathode, and the module is ready for direct connection to 5V microcontrollers without additional level shifting. Note that the module does not include a microcontroller or power supply.

Typical Uses

  • Custom scoreboards and timers
  • Menu and parameter adjustment interfaces
  • Instrumentation readouts
  • DIY control panels
  • Educational projects teaching serial communication

What's in the Box

1 x TM1638 Button Digital LED Display Module.

Quick specs

Model No. / Name
LED Display Module
Rated Voltage (VDC)
12
Operating Voltage (VDC)
DC 7.0V-13.6V
Input current
0.24A
Rated Speed (RPM)
9500RPM
Operating Temperature (°C)
-10°C ~ 70°C
See all specifications