Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A closed-type LM10UU linear motion bearing with a 10mm bore, 19mm outer diameter and 29mm length. Its chromium steel casing and ball cage deliver low-friction, quiet guidance along a 10mm shaft.

Key Highlights

  • LM10UU closed-type linear ball bushing with 10mm shaft bore
  • 19mm outer diameter and 29mm overall length for standard mounts
  • Chromium steel outer casing for strength and rigidity
  • Ball cage design supports low-noise running at high speed
  • Standardised dimensions make worn bearings easy to replace
  • Compact and lightweight at 0.099 kg shipping weight

Ideal For

  • 3D printer builders using 10mm linear shafts
  • CNC machine and router hobbyists
  • Robotics prototyping and DIY automation projects
  • Makers replacing a worn 19mm OD linear bushing
  • Workshops maintaining compact linear slide units

Buying Tip

Check that your shaft measures 10mm and your housing accepts a 19mm outer diameter before ordering, and keep the shaft clean and lubricated for smooth travel.

Elecvora expert review

Our verdict

The LM10UU is a simple, standard-sized linear bushing that does its job without fuss. Its chromium steel casing and ball cage make it a sensible spare or build part for 10mm shaft systems.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Standard 10mm bore and 19mm outer diameter fit common mounts
  • Chromium steel casing adds strength and rigidity
  • Ball cage supports low-noise running at speed
  • Lightweight and easy to keep as a spare

Cons

  • Shaft and housing are not included
  • Requires regular lubrication for smooth motion
  • Shaft quality strongly affects performance

Best for

Makers and technicians building or repairing 10mm linear motion assemblies

Not ideal for

Applications needing a shaft diameter other than 10mm

Specifications

Model No. / NameLM10UU
Length (mm)29
Outer CasingChromium Steel
Outer Diameter (mm)19
Shaft ID(mm)10
Width (mm)19
ColorSilver
Shipping Weight0.099 kg
Shipping Dimensions3 × 2 × 1 cm

What's in the box

  • 1 x Two Trees LM10UU 10mm Linear Motion Bearing

Frequently Asked Questions

What shaft size does this bearing use?
It has a 10mm bore, so it is designed for 10mm round shafts. The outer diameter is 19mm and the overall length is 29mm.
Is this a closed or open type bearing?
It is a closed-type ball bushing, meaning the shaft passes through a full ring rather than an open slot.
Does it need lubrication?
Yes. Linear motion bearings slide along the shaft, so the shaft should be lubricated for reliable, smooth movement.
What is included in the package?
The package contains one Two Trees LM10UU 10mm linear motion bearing. Shafts, housings and lubricant are not included.
Can I use it to replace a worn bearing?
Yes, provided the worn part has the same standard dimensions: 10mm bore, 19mm outer diameter and 29mm length.
What material is the outer casing?
The outer casing is made of chromium steel, and the bearing has a silver finish.

Overview

The Two Trees LM10UU is a linear motion bearing designed to carry a load along a single axis on a 10mm round shaft. It is a closed-type ball bushing, so the shaft passes through the bore and the bearing slides with low friction. The outer casing is made of chromium steel, which gives the unit the strength and rigidity required for repeated linear movement in compact machines and prototypes.

With a 19mm outer diameter and 29mm length, the LM10UU follows a widely used size standard. That makes it a practical replacement part when an existing bushing of the same dimensions becomes worn, and it keeps design work simple for anyone building around common 10mm shafting.

Key Features

  • 10mm bore: sized for 10mm shafts in linear guide setups.
  • Chromium steel casing: provides strength and rigidity for the outer housing.
  • Ball cage guidance: keeps the balls evenly spaced for smooth travel and low noise.
  • Closed-type design: a full ring around the shaft for supported linear motion.
  • Standard dimensions: 19mm outer diameter and 29mm length for common mounts.
  • Lightweight: only 0.099 kg shipping weight, easy to store as a spare.

Specifications Explained

The 10mm shaft ID is the bore size, so the bearing is intended for shafts measuring 10mm across. The 19mm outer diameter determines the housing or slide unit it fits into, while the 29mm length sets how much space it occupies along the shaft. The 19mm width figure describes the bearing body across its outer profile, and the silver finish reflects the chromium steel casing.

Because the balls run in a guided cage, motion stays consistent as the bearing travels. The casing material contributes rigidity so the housing holds its shape under load. Together these details make the LM10UU a straightforward choice for compact linear motion assemblies.

Compatibility and Requirements

This bearing requires a 10mm round shaft and a housing or mounted slide unit that accepts a 19mm outer diameter. For reliable, smooth travel the shaft should be clean and lubricated, since the quality of the shaft directly affects the quality of linear motion. A chrome-plated, hardened shaft is a sensible pairing. No other components are included, so shafts, housings and lubrication must be sourced separately.

Typical Uses

Linear bearings of this type are commonly found in 3D printers, CNC machines, DIY builds and robotics prototyping. The LM10UU is suited to any compact mechanism that needs guided movement along one axis, such as a sliding carriage or a moving tool head. Builders who already use 10mm shafting will find it a natural fit for repairs and new designs alike.

What's in the Box

1 x Two Trees LM10UU 10mm Linear Motion Bearing.

Quick specs

Model No. / Name
LM10UU
Length (mm)
29
Outer Casing
Chromium Steel
Outer Diameter (mm)
19
Shaft ID(mm)
10
Width (mm)
19
See all specifications