Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

This SK10 end support securely holds 10mm linear shafts in CNC routers, 3D printers and automation systems. Its steel body and precise 32mm center hole distance provide a rigid, accurate mounting point for XYZ motion tables.

Key Highlights

  • Fits 10mm diameter linear shafts
  • Steel construction for rigidity and durability
  • Compact 14 x 42 x 32mm footprint
  • 5.5mm mounting hole diameter
  • Center hole distance approximately 32mm
  • Lightweight at just 25g per unit

Ideal For

  • CNC router builders using 10mm shafts
  • 3D printer enthusiasts upgrading motion systems
  • Industrial automation technicians
  • DIY makers building XYZ tables
  • Maintenance teams replacing worn shaft supports

Buying Tip

Confirm your shaft diameter is exactly 10mm and that your mounting screws fit the 5.5mm hole before ordering.

Elecvora expert review

Our verdict

The Two Trees SK10 is a straightforward, well-made end support for 10mm shafts that does its job without fuss. Its steel construction and compact size make it a practical choice for CNC and automation builds.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Accurate 10mm shaft fit
  • Rigid steel body
  • Lightweight and compact
  • Simple installation

Cons

  • Shafts and fasteners not included
  • Only one support per package

Best for

Builders needing a reliable end support for 10mm linear shafts

Not ideal for

Applications requiring shaft diameters other than 10mm

Specifications

Model No. / NameSK10
Shaft ID(mm)10
MaterialSteel
Dimensions (L x W x H) mm14x42x32
Hole diameter(mm)5.5
Additional Specs.Center Hole Distance(mm): Approx. 32
Weight (g)25
Shaft Diameter10 mm
Shipping Weight0.03 kg
Shipping Dimensions6 × 4 × 3 cm

What's in the box

  • 1 x Two Trees SK10 10mm linear bearing rail support

Frequently Asked Questions

What shaft diameter does this support fit?
It fits shafts with a 10mm outer diameter, such as 10mm hard chrome plated rods.
Does the package include mounting screws?
No, the package includes only the SK10 support. You will need to supply your own fasteners.
What is the hole diameter for mounting?
The mounting hole diameter is 5.5mm, suitable for screws or bolts up to that size.
Can this support be used with 8mm shafts?
No, the 10mm inner diameter is designed specifically for 10mm shafts and will not properly secure 8mm shafts.
How much does the support weigh?
Each SK10 support weighs approximately 25g.
Is this a linear bearing or a shaft support?
It is a shaft end support that holds the shaft in place; it does not contain a moving linear bearing.

Overview

The Two Trees SK10 is a linear bearing rail end support engineered to hold 10mm hard chrome plated shafts in linear motion assemblies. It acts as a fixed anchor point at the end of a shaft, helping maintain alignment and rigidity across XYZ tables used in CNC routers, engraving machines, 3D printers and automated pick-and-drop systems. The support is made from steel and weighs only 25g, so it adds strength without unnecessary mass to moving gantries or stationary frames.

Key Features

  • 10mm shaft compatibility: The 10mm inner diameter matches standard 10mm linear shafts and chrome plated rods.
  • Steel body: Provides high rigidity and stable positioning under normal CNC and automation loads.
  • Compact dimensions: At 14 x 42 x 32mm, the support fits into tight machine layouts.
  • 5.5mm mounting hole: Accepts common fasteners for secure attachment to plates and frames.
  • 32mm center hole distance: Offers a balanced mounting pattern for accurate installation.
  • Lightweight design: At 25g, it minimizes added inertia on moving assemblies.

Specifications Explained

The 10mm shaft inner diameter is the most important figure: it determines which shafts the support will hold. Use it only with 10mm shafts. The 14 x 42 x 32mm dimensions describe the overall length, width and height, helping you confirm clearance in your assembly. The 5.5mm hole diameter is sized for mounting screws or bolts; check that your fastener diameter matches. The center hole distance of approximately 32mm indicates the spacing between the shaft center and the mounting hole, which affects how the support aligns with your rail or plate. Finally, the 25g weight keeps the part light enough for moving axes without sacrificing steel strength.

Compatibility and Requirements

This support is intended for 10mm linear shafts and hard chrome plated rods. It does not include shafts, bearings or fasteners, so you will need to supply the appropriate 10mm shaft and mounting hardware for your build. The 5.5mm hole diameter suits fasteners that fit through that opening. No other compatibility details are specified.

Typical Uses

Common applications include CNC routers, CNC engraving machines, 3D printers, cashew nut shelling machines, pick-and-drop machines and industrial automation robots. It is also suitable for any DIY or professional project that requires a rigid end support for 10mm shafts in an XYZ motion system.

What's in the Box

1 x Two Trees SK10 10mm linear bearing rail support.

Quick specs

Model No. / Name
SK10
Shaft ID(mm)
10
Material
Steel
Dimensions (L x W x H) mm
14x42x32
Hole diameter(mm)
5.5
Additional Specs.
Center Hole Distance(mm): Approx. 32
See all specifications