
1 / 3 · Click to enlarge
AI Summary
A small module that converts a 0-5V analog voltage into a linear 0-100% PWM signal, with dual PWMA and PWMB outputs. It runs on 3-6V DC and connects via 5.0mm terminals or 2.54mm pin headers.
Key Highlights
- Converts 0-5V analog input into 0-100% PWM duty cycle
- Dual outputs: PWMA rises with voltage, PWMB falls
- Runs from a 3-6V DC supply at 6-14mA
- 5.0mm terminal blocks plus 2.54mm pin headers
- Onboard LED indicators show PWM output status
- Compact 23 x 14mm board weighing about 2g
Ideal For
- Makers building analog-controlled motor speed circuits
- Students learning about PWM and signal conversion
- Technicians adding dimming to LED lighting
- DIY enthusiasts working with potentiometer-based control
- Embedded developers prototyping sensor-to-PWM interfaces
Buying Tip
Check that your control voltage stays within 0-5V and your supply within 3-6V DC before wiring, since the module is not specified for higher voltages.
Elecvora expert review
Our verdict
A tidy, low-cost converter that removes the need to code PWM generation when you already have an analog control voltage. Its dual complementary outputs and clear terminal labelling make it easy to drop into small projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Straightforward analog-to-PWM conversion with no programming
- Dual PWMA and PWMB outputs from a single input
- Compact 23 x 14mm board with both terminals and headers
- Onboard LED feedback for quick status checks
Cons
- Input is limited to 0-5V and supply to 3-6V DC
- Requires an external driver stage for motors or high-power loads
- No enclosure or mounting hardware supplied
Best for
Makers and students needing simple analog-controlled PWM
Not ideal for
Projects requiring high-voltage or high-current output directly from the module
Specifications
| Item Type | PWM module |
|---|---|
| Operating Voltage (V) | DC 3-6 |
| Operating Current (A) | 0.006 to 0.014 |
| Input Voltage Range (DC) | 0-5V |
| PWM duty cycle | 0% to 100% |
| PWM frequency | ±3% |
| Accuracy | ±1% |
| Connector Type | 5.0mm terminals + 2.54mm pin headers |
| Length (mm) | 23 |
| Width (mm) | 14 |
| Weight (g) | 02 |
| Shipping Weight | 0.004 kg |
| Shipping Dimensions | 3 × 3 × 2 cm |
What's in the box
- 1 x Voltage to PWM converter module
Frequently Asked Questions
What does this module actually do?
What supply voltage does it need?
What is the difference between PWMA and PWMB?
Can I control it with a potentiometer?
How do I connect wires to the board?
Is anything else included?
Overview
The Generic Voltage to PWM module is a small signal-conversion board that takes an analog voltage between 0V and 5V and turns it into a PWM signal whose duty cycle tracks that input from 0% to 100%. Instead of programming a microcontroller to generate variable duty cycle, you can feed an analog voltage in and let the module handle the conversion. The board measures just 23 x 14mm and weighs around 2g, so it fits into tight enclosures, breadboards and hand-built projects.
Two PWM outputs are provided. PWMA increases its duty cycle as the input voltage rises, while PWMB moves in the opposite direction, decreasing as the input rises. This complementary behaviour is useful when you need two channels driven in opposition from a single analog control voltage.
Key Features
- Linear conversion: 0-5V input maps to a 0-100% PWM duty cycle.
- Dual outputs: PWMA and PWMB give inverted control responses from one input.
- Low power draw: operates from 3-6V DC and consumes roughly 6-14mA.
- Flexible connections: 5.0mm terminal blocks for wiring plus 2.54mm pin headers for jumper leads.
- Visual feedback: onboard LED indicators reflect the PWM output state.
- Potentiometer ready: works with an external WH148 10K potentiometer as a manual control source.
Specifications Explained
The 0-5V input range means the module expects an analog control voltage no higher than 5V; going beyond that range is outside its stated specification. The PWM duty cycle covers the full 0% to 100% span, so you can command anything from a fully off to a fully on output.
Accuracy of ±1% and a frequency tolerance of ±3% describe how closely the output follows the intended value. In practice this gives steady, repeatable control for dimming and speed regulation rather than precision instrumentation.
The 3-6V DC operating voltage and 6-14mA current draw keep the module suitable for small supplies and battery-powered builds. The 5.0mm terminals accept hook-up wire for permanent installations, while the 2.54mm headers suit dupont jumpers on a breadboard.
Compatibility and Requirements
You need a DC supply within the 3-6V range and an analog control voltage within 0-5V. An external WH148 10K potentiometer can be used as the voltage source for manual adjustment. The board provides solder pads that let you bypass resistors when higher-current PWM output is needed. No firmware or programming is required for basic operation.
Typical Uses
- Motor speed control through a suitable driver stage
- LED brightness adjustment and dimming circuits
- Analog sensor to digital control signal conversion
- DIY electronics, automation and embedded development projects
- Bench experiments and teaching demonstrations of PWM
What's in the Box
1 x Voltage to PWM converter module.
Quick specs
- Item Type
- PWM module
- Operating Voltage (V)
- DC 3-6
- Operating Current (A)
- 0.006 to 0.014
- Input Voltage Range (DC)
- 0-5V
- PWM duty cycle
- 0% to 100%
- PWM frequency
- ±3%













