
1 / 6 · Click to enlarge
AI Summary
This Waveshare module adds two RS232 ports to your Raspberry Pi Pico using the SP3232EEN transceiver. It supports 3.3-5V logic and baud rates up to 912600bps, with ESD protection and status LEDs for easy debugging.
Key Highlights
- Standard Raspberry Pi Pico header for direct mounting
- Dual RS232 channels via DB9 connector and adapter cable
- SP3232EEN transceiver with ESD and TVS protection
- Wide baud rate range: 300 to 912600bps
- Operating voltage: 3.3V to 5V
- RX/TX status LEDs for each channel
Ideal For
- Makers and hobbyists working with Raspberry Pi Pico
- Engineers integrating RS232 devices with microcontrollers
- Students learning serial communication protocols
- Industrial automation prototypers
- Legacy system integrators
Buying Tip
Check that your target RS232 device uses standard voltage levels and that you have the appropriate DB9 cable or adapter for your setup.
Elecvora expert review
Our verdict
This module offers a clean, well-protected way to add dual RS232 ports to a Pico, with useful status LEDs and a wide baud rate range. It is a solid choice for anyone needing reliable serial communication in embedded projects.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Plug-and-play with standard Pico header
- Two independent RS232 channels
- ESD and TVS protection for robustness
- Status LEDs simplify debugging
- Includes adapter cable and development resources
Cons
- Requires a Raspberry Pi Pico (not included)
- No mounting holes for permanent installation
- Baud rate configuration depends on software
Best for
Makers and engineers needing to connect a Pico to RS232 equipment
Not ideal for
Those looking for a USB-to-RS232 converter or a standalone RS232 interface
Specifications
| Model No. / Name | RS232 Module |
|---|---|
| Operating Voltage (V) | 3.3 to 5 |
| Communication Mode | UART |
| Baud Rate (bps) | 300 to 912600bps |
| RS232 transceiver | SP3232EEN |
| Shipping Weight | 0.12 kg |
| Shipping Dimensions | 5 × 5 × 1 cm |
What's in the box
- 1 x PICO-2CH-RS232 Module
- 1 x DB9 to 3PIN Adapter Cable
Frequently Asked Questions
Does this module work with any Raspberry Pi Pico model?
What is the maximum baud rate supported?
Can I power the module from the Pico's 3.3V pin?
What is included in the package?
Are there example programs available?
Does the module have ESD protection?
Overview
The Waveshare 2-Channel UART to RS232 Module is designed to add RS232 connectivity to your Raspberry Pi Pico. Using the SP3232EEN transceiver, it converts UART signals to RS232 and vice versa, allowing your Pico to communicate with a wide range of industrial and legacy devices. The board plugs directly into the Pico's standard header and provides two independent RS232 channels through a DB9 connector, with an adapter cable included for easy wiring.
Key Features
- Standard Pico header – mounts directly onto Raspberry Pi Pico series boards.
- Dual RS232 channels – two separate RS232 interfaces via DB9 male connector (adapter cable included).
- SP3232EEN transceiver – reliable RS232 communication with ESD and TVS protection.
- Wide baud rate support – from 300bps up to 912600bps.
- Status indicators – RXD0/TXD0 and RXD1/TXD1 LEDs for each channel.
- Flexible power – operates from 3.3V to 5V.
Specifications Explained
Operating voltage (3.3V to 5V): The module can be powered from the Pico's 3.3V supply or an external 5V source, making it compatible with both 3.3V and 5V logic systems. Baud rate (300 to 912600bps): This wide range covers everything from slow legacy equipment to high-speed data links. SP3232EEN transceiver: A robust RS232 driver/receiver that includes ESD protection (up to ±15kV) and ensures reliable communication over standard RS232 cables. Two channels: Each channel has its own RX and TX lines, so you can connect two RS232 devices simultaneously or use one for full-duplex communication. TVS diode and ESD diode: Provide additional protection against voltage spikes and static discharge, safeguarding your Pico and the module.
Compatibility and Requirements
The module is compatible with Raspberry Pi Pico series boards. It requires a Pico board (not included) and a power source within the 3.3V to 5V range. A DB9 to 3-pin adapter cable is included for connecting to RS232 devices. Development resources and examples for C/C++ and MicroPython are available.
Typical Uses
- Connecting a Pico to industrial RS232 equipment such as PLCs, sensors, and controllers.
- Interfacing with legacy computers, modems, or networking gear.
- Building a serial console or debugging tool.
- Educational projects exploring UART and RS232 communication.
- Prototyping data loggers or protocol converters.
What's in the Box
- 1 x PICO-2CH-RS232 Module
- 1 x DB9 to 3PIN Adapter Cable


Quick specs
- Model No. / Name
- RS232 Module
- Operating Voltage (V)
- 3.3 to 5
- Communication Mode
- UART
- Baud Rate (bps)
- 300 to 912600bps
- RS232 transceiver
- SP3232EEN
- Shipping Weight
- 0.12 kg



















