Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Expansion Board; interface I2C; operating temperature (°c) -40-85℃.

Key Highlights

  • Model No. / Name: Expansion Board
  • Interface: I2C
  • Operating Temperature (°C): -40-85℃

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameExpansion Board
InterfaceI2C
Operating Temperature (°C)-40-85℃
Current (A)<0.1µA
Dimensions (L x W x H) mm38x23mm
Shipping Weight0.01 kg
Shipping Dimensions9 × 7 × 1 cm

Overview

The Waveshare AW9523B IO Expansion Board, I2C Interface, Expands 16 I/O Pins, made by WAVESHARE, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Expansion Board
  • Interface: I2C (confirm your cable or board uses the same connector)
  • Operating Temperature (°C): -40-85℃
  • Current (A): <0.1µA (your supply must deliver at least this much current)
  • Dimensions (L x W x H) mm: 38x23mm (measure your mounting space before ordering)
  • Shipping Weight: 0.01 kg (important for drones, RC models and anything you carry)
  • Shipping Dimensions: 9 × 7 × 1 cm (measure your mounting space before ordering)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

AW9523B use I2C interface, allows using 4 expansion boards at the same time by modifying the i2c address, expand up to 64 I/O ports. Pin configuration:
  1. VCC: Power input(3.3V/5V)
  2. GND: GND
  3. SDA: I2C Data input
  4. SCL: I2C Clock input
  5. INT: Interrupt output
  6. RST: Reset

Connect To STM32

Outline Dimensions:


Features: 

  1. I2C bus, allows expanding 16 I/O ports by just using two wires
  2. Support driving 16-ch common anode constant current LED, 256-step linear dimming, current controllable
  3. Output interrupt (INT) signal when changing the state of an input port
  4. I2C address configurable by shorting the A0/A1 jumpers
  5. Provides two connector options: PH2.0 header and/or solder pads, allows multi I2C modules to be stacked
  6. Onboard voltage translator, compatible with 3.3V/5V level
  7. Comes with development resources and manual (examples for Raspberry Pi / micro:bit / Arduino / STM32)

Useful link:

To do Hardware and Software setup, please follow this tutorial.

Packages Includes:

1 x Waveshare AW9523B IO Expansion Board, I2C Interface, Expands 16 I/O Pins

Quick specs

Model No. / Name
Expansion Board
Interface
I2C
Operating Temperature (°C)
-40-85℃
Current (A)
&lt;0.1µA
Dimensions (L x W x H) mm
38x23mm
Shipping Weight
0.01 kg
See all specifications