Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

An industrial DIN-rail module that converts between CAN FD and RS232 or RS485 in both directions. It supports CAN FD up to 5 Mbps and runs from a wide 9-36V supply across a -40 to 85°C range.

Key Highlights

  • Bidirectional CAN FD to RS232/RS485 data conversion
  • Arbitration rates from 5 Kbps to 1 Mbps, data domain to 5 Mbps
  • Wide DC 9-36V input for varied field power sources
  • Switchable 120Ω termination resistors built in
  • DIN-rail mounting with -40 to 85°C operating range
  • 8 kV air and 6 kV contact ESD protection

Ideal For

  • Industrial automation engineers bridging CAN FD and serial devices
  • Robotics developers integrating RS485 sensors with CAN buses
  • EV and battery system technicians working with CAN FD networks
  • Control cabinet builders needing DIN-rail protocol conversion
  • Field service teams maintaining mixed CAN and RS485 installations

Buying Tip

Confirm whether your serial device uses RS232 or RS485 wiring before ordering, since the module provides one serial channel that serves either interface but not both at once.

Elecvora expert review

Our verdict

A practical industrial bridge for teams that need CAN FD and serial devices to talk without designing custom hardware. The wide voltage range, DIN-rail mount and switchable termination remove several common integration headaches.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Bidirectional CAN FD to RS232/RS485 conversion in one module
  • Wide 9-36V input and -40 to 85°C operating range
  • Switchable 120Ω termination and DIN-rail mounting
  • ESD protection rated 8 kV air and 6 kV contact

Cons

  • Only one serial channel, so RS232 and RS485 cannot run together
  • Configuration requires host software or AT commands rather than a display
  • No wireless or Ethernet option on this model

Best for

Integrators bridging CAN FD buses with RS232 or RS485 equipment in cabinets

Not ideal for

Users who need simultaneous RS232 and RS485 ports or plug-and-play USB conversion

Specifications

Item TypeProtocol Converter
Model No. / NameCAN FD to RS232/RS485 Bidirectional Protocol Converter
Operating Voltage (V)DC 9 ~ 36
ESD Protection8 kV air discharge, 6 kV contact discharge
InstallationDIN-rail mounting
Channel Type1-channel CAN
Protocol SupportCAN FD, CAN 2.0A, CAN 2.0B
Baud Rate (bps)Arbitration domain: 5 Kbps – 1 Mbps, Data domain: 100 Kbps – 5 Mbps
SupportedRS232 or RS485 (1 channel)
Operating Temperature (°C)–40 to 85
Storage Temperature (°C)–40 to 105
CommunicationCAN FD ↔ RS232/RS485
Length (mm)109.3
Width (mm)81
Weight (g)134
Shipping Weight0.168 kg
Shipping Dimensions16 × 11 × 3 cm

What's in the box

  • 1 x Waveshare CAN FD to RS232/RS485 Bidirectional Protocol Converter
  • 1 x Power plug adapter
  • 1 x Screwdriver

Frequently Asked Questions

Does this converter work in both directions?
Yes. It converts CAN FD frames to RS232 or RS485 and also converts serial data back onto the CAN FD bus.
Can I use RS232 and RS485 at the same time?
No. The module provides one serial channel that can be configured as either RS232 or RS485, not both simultaneously.
What power supply does it need?
It accepts a DC input from 9V to 36V, which covers common 12V and 24V industrial supplies.
Which CAN standards are supported?
The module supports CAN FD as well as CAN 2.0A and CAN 2.0B, with arbitration rates from 5 Kbps to 1 Mbps and data rates up to 5 Mbps.
How is the module configured?
Settings are changed through host software and AT commands, including bit rates, serial parameters and conversion behaviour.
What is included in the package?
You receive the converter, a power plug adapter and a screwdriver.

Overview

The Waveshare CAN FD to RS232/RS485 Bidirectional Protocol Converter links a CAN FD bus to a serial RS232 or RS485 device and passes data in both directions. It is a single-channel CAN module that also understands CAN 2.0A and CAN 2.0B frames, so older CAN equipment can share the same bridge as newer CAN FD hardware.

Built for control cabinets and field enclosures, the module accepts DC 9-36V, clips onto a DIN rail and tolerates operating temperatures from -40 to 85°C. Onboard ESD protection is rated at 8 kV air discharge and 6 kV contact discharge, which helps in electrically noisy installations.

Key Features

  • Two-way bridging: CAN FD traffic converts to RS232 or RS485 and back, with one serial channel available at a time.
  • Flexible CAN FD speeds: arbitration domain from 5 Kbps to 1 Mbps and data domain from 100 Kbps to 5 Mbps.
  • Wide power range: DC 9-36V input suits 12V and 24V control systems.
  • Switchable termination: built-in 120Ω resistors can be enabled or disabled for the bus layout.
  • Configuration options: settings are adjusted through host software and AT commands.
  • Industrial housing: DIN-rail mounting with a compact 109.3 × 81 mm footprint.

Specifications Explained

CAN FD speed

The arbitration domain runs from 5 Kbps to 1 Mbps while the data domain reaches 100 Kbps to 5 Mbps. In practice the slower arbitration rate keeps bus arbitration reliable, and the faster data phase shortens payload transfer time on CAN FD frames.

Serial side

One serial channel is provided, and it works as either RS232 or RS485. Choose the interface that matches the connected controller, meter or gateway.

Power and protection

A DC 9-36V input range gives headroom for both 12V and 24V supplies. The 8 kV air and 6 kV contact ESD ratings describe the module's discharge tolerance at the enclosure level.

Environmental range

Operation from -40 to 85°C and storage from -40 to 105°C cover most indoor cabinets and many sheltered outdoor installations.

Compatibility and Requirements

The converter works with CAN FD, CAN 2.0A and CAN 2.0B networks and with RS232 or RS485 serial devices. It requires a DC 9-36V power source. Configuration needs host software and AT command support on the connected system. A DIN rail is required for mounting.

Typical Uses

  • Connecting RS485 sensors or meters to a CAN FD vehicle or machine bus.
  • Adding serial diagnostics to robotics and automation controllers.
  • Bridging legacy CAN 2.0 equipment into a CAN FD monitoring setup.
  • Industrial data logging where a serial port and CAN bus must exchange data.

What's in the Box

  • 1 × Waveshare CAN FD to RS232/RS485 Bidirectional Protocol Converter
  • 1 × Power plug adapter
  • 1 × Screwdriver

Quick specs

Item Type
Protocol Converter
Model No. / Name
CAN FD to RS232/RS485 Bidirectional Protocol Converter
Operating Voltage (V)
DC 9 ~ 36
ESD Protection
8 kV air discharge, 6 kV contact discharge
Installation
DIN-rail mounting
Channel Type
1-channel CAN
See all specifications