
1 / 6 · Click to enlarge
AI Summary
A compact CP2102-based USB-to-UART bridge that gives your microcontroller a standard COM port over Micro-USB. The onboard jumper selects 3.3V or 5V output, so it matches common logic levels without extra parts.
Key Highlights
- CP2102 single-chip USB to UART bridge onboard
- Selectable 3.3V or 5V output via onboard jumper
- UART baud rates from 300 bps to 1 Mbits
- Full handshaking and modem interface signals
- Compact 44 x 20.5 mm board weighing about 14 g
- Pin headers and jumper wire included
Ideal For
- Makers adding a serial console to microcontroller projects
- Students learning embedded serial communication
- Engineers debugging and programming UART devices
- Hobbyists replacing a simple serial cable with USB
- Anyone needing selectable 3.3V or 5V UART logic levels
Buying Tip
Check whether your target board expects 3.3V or 5V logic and set the onboard jumper to match before connecting TX and RX.
Elecvora expert review
Our verdict
A tidy, well-integrated USB-to-UART bridge that covers the everyday serial tasks most embedded projects need. The selectable 3.3V or 5V output and wide baud range make it easy to reuse across different boards.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Single-chip CP2102 design with no external crystal or resistors
- Jumper-selectable 3.3V or 5V output
- Wide 300 bps to 1 Mbits baud range
- Small 44 x 20.5 mm footprint
- Headers and jumper wire included
Cons
- Requires a Micro-USB cable, which is not included
- Signal pins need soldering or header assembly before use
Best for
Makers and engineers who need a dependable USB serial bridge for microcontrollers
Not ideal for
Users who want a ready-to-use cable with no assembly or driver setup
Specifications
| Model No. / Name | Board |
|---|---|
| Operating Voltage (V) | 3.3 to 5 |
| UART Baud Rate | 300 bps to 1 Mbits |
| Length (mm) | 44 |
| Width (mm) | 20.5 |
| Weight (g) | 14 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 5 × 2 × 1 cm |
What's in the box
- 1 x CP2102 USB UART Board (Micro-USB)
- 2 x 4-pin male pin header
- 1 x 4-pin female pin header
- 1 x 6-pin custom connector jumper wire
Frequently Asked Questions
What does this board do?
How do I choose between 3.3V and 5V?
What baud rates are supported?
Do I need to install a driver?
What is included with the board?
Is a USB cable included?
Overview
The Waveshare CP2102 USB UART Board (Micro-USB) is a small accessory board that connects a computer's USB port to the serial interface of a microcontroller or embedded system. The CP2102 single-chip bridge handles the USB-to-UART conversion, so the board appears to the host as a standard COM port. Because the chip integrates the required circuitry, the design needs no external resistors and no external crystal, and it includes an on-chip power-on reset circuit and voltage regulator.
The board is powered from the USB bus and provides a selectable 3.3V or 5V output through an onboard jumper, letting you match the logic level of the device you are connecting. It measures 44 mm by 20.5 mm and weighs about 14 g, so it sits comfortably on a bench, inside a project box or on a breadboard.
Key Features
- Single-chip USB to UART data transfer using the CP2102
- Onboard jumper for 3.3V or 5V output selection
- UART baud rates from 300 bps to 1 Mbits
- All handshaking and modem interface signals supported
- USB suspend states supported via SUSPEND pins
- Drilled holes expose the remaining pins for user connections
Specifications Explained
Operating voltage: The board runs from USB power and can output either 3.3V or 5V on VCCIO, chosen with the jumper. Set it to match the supply your target board expects before connecting the signal lines.
Baud rate: The 300 bps to 1 Mbits range covers slow debug consoles as well as faster data links, so the same board works across many projects.
Size and weight: At 44 x 20.5 mm and 14 g, the module is easy to mount and adds little bulk to a build.
Compatibility and Requirements
The board connects to a host computer through its Micro-USB port and presents itself as a virtual COM port. Virtual COM port device drivers are supported, and USBXpress direct driver support is available. The board is USB Specification 2.0 compliant at full speed (12 Mbps). Signal lines include TXD, RXD, RTS and CTS for handshaking, plus VCCIO and GND for power and ground. A host computer with an available USB port and the appropriate driver is required.
Typical Uses
- Adding a serial console to a microcontroller project
- Programming and debugging embedded boards
- Replacing a simple serial cable between a PC and a device
- Data logging and firmware uploads over UART
What's in the Box
- 1 x CP2102 USB UART Board (Micro-USB)
- 2 x 4-pin male pin header and 1 x 4-pin female pin header
- 1 x 6-pin custom connector jumper wire

Quick specs
- Model No. / Name
- Board
- Operating Voltage (V)
- 3.3 to 5
- UART Baud Rate
- 300 bps to 1 Mbits
- Length (mm)
- 44
- Width (mm)
- 20.5
- Weight (g)
- 14



















