
1 / 5 · Click to enlarge
At a glance
Made by WAVESHARE, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Board; operating voltage (v) 3.3; driver ic ENC28J60. Check that your power source supplies 3.3 before connecting it.
Key Highlights
- Model No. / Name: Board
- Operating Voltage (V): 3.3
- Driver IC: ENC28J60
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Board |
|---|---|
| Operating Voltage (V) | 3.3 |
| Driver IC | ENC28J60 |
| Output Frequency | 25MHz |
| Length (mm) | 60 |
| Width (mm) | 19 |
| Weight (g) | 14 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 6 × 2 × 4 cm |
Overview
The Waveshare ENC28J60 Ethernet Board, made by WAVESHARE, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Board
- Operating Voltage (V): 3.3 (match this to your power supply; too high a voltage can damage the part)
- Driver IC: ENC28J60
- Output Frequency: 25MHz (make sure the rest of your system works at this frequency)
- Length (mm): 60 (measure your mounting space before ordering)
- Width (mm): 19 (measure your mounting space before ordering)
- Weight (g): 14 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.02 kg (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The Waveshare ENC28J60 Ethernet Board contains an Ethernet port and converts Ethernet input into SPI. It is ideal for connecting microcontrollers to the Ethernet network.
The board is based on Microchip’s ENC28J60 integrated circuit and it can be used to provide internet connectivity to microcontroller systems like Arduino boards over Ethernet.
Since the board is small in size and it supports SPI, it is applicable to a variety of projects.
Utilizes the new SSOP 12 package Microchip ENC28J60 Stand-Alone Ethernet Controller IC featuring a host of features to handle most of network protocol requirements. The board connects directly to most microcontrollers with a standard SPI interface with a transfer speed of up to 25MHz.
The ENC28J60 Ethernet Module is an industry-standard Serial Peripheral Interface (SPI). It is designed to serve as an Ethernet network interface for any controller equipped with SPI.
This module includes all you need to change your Arduino into an ethernet device for your network. These days many makers prefer WiFi-type network communication. Ethernet still has lots of applications and still stays a fast and secure way to connect to network devices.
Useful link:
Features :
- Fully Compatible with 10/100/1000Base-T Networks
- Integrated MAC and 10Base-T PHY
- Supports One 10Base-T Port with Automatic Polarity Detection and Correction
- Supports Full and Half-Duplex modes
- Automatic Programmable Retransmit on Collision
- Programmable Padding and CRC Generation
- Automatic Rejection of Erroneous Packets
- SPI Interface with Clock Speeds Up to 20 MHz
- Chipboard ENC28J60/SS.
- The board 25MHZ crystal.
Package Includes :
1 x Waveshare ENC28J60 Ethernet Board
Quick specs
- Model No. / Name
- Board
- Operating Voltage (V)
- 3.3
- Driver IC
- ENC28J60
- Output Frequency
- 25MHz
- Length (mm)
- 60
- Width (mm)
- 19



















