
1 / 5 · Click to enlarge
At a glance
Made by WAVESHARE, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Board; operating voltage (v) 3.3 to 5; no. of pins 6. Check that your power source supplies 3.3 to 5 before connecting it.
Key Highlights
- Model No. / Name: Board
- Operating Voltage (V): 3.3 to 5
- No. of Pins: 6
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Model No. / Name | Board |
|---|---|
| Operating Voltage (V) | 3.3 to 5 |
| No. of Pins | 6 |
| Length (mm) | 44 |
| Width (mm) | 19 |
| Weight (g) | 13 |
| Shipping Weight | 0.02 kg |
| Shipping Dimensions | 5 × 2 × 2 cm |
Overview
The Waveshare FT232 USB UART Board (Micro-USB), made by WAVESHARE, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Model No. / Name: Board
- Operating Voltage (V): 3.3 to 5 (match this to your power supply; too high a voltage can damage the part)
- No. of Pins: 6
- Length (mm): 44 (measure your mounting space before ordering)
- Width (mm): 19 (measure your mounting space before ordering)
- Weight (g): 13 (important for drones, RC models and anything you carry)
- Shipping Weight: 0.02 kg (important for drones, RC models and anything you carry)
- Shipping Dimensions: 5 × 2 × 2 cm (measure your mounting space before ordering)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Pin connections of FT232 USB UART Board:
- VCCIO ↔ 3.3V or 5V output (the module is powered from USB, the onboard jumper should be shorted to 3.3V or 5V)
- GND ↔ GND
- TXD ↔ MCU.RX (signal direction: MCU.RX << FT232 << PC.TX)
- RXD ↔ MCU.TX (signal direction: MCU.TX >> FT232 >> PC.RX)
- RTS ↔ MCU.CTS (signal direction: MCU.CTS << FT232 << PC.RTS)
- CTS ↔ MCU.RTS (signal direction: MCU.RTS >> FT232 >> PC.CTS)
Features:
- Original FT232RL onboard
- Supports Mac, Linux, Android, WinCE, Windows 7/8/8.1/10...
- 3 power mode: 5V output, 3.3V output, or powered by target board (3.3V-5V)
- 3 LEDs: TXD LED, RXD LED, POWER LED
- TXD, RXD, RTS#, CTS#: connected to the onboard soldered pin headers
- The other Pins: accessible on the drill holes (separate pin headers are also provided for easily connecting to the user system, the pitch is compatible with breadboards)
Package Includes:
1 x FT232 USB UART Board (micro)
2 x 5-pin male pin header & 5-pin female pin header x 2
1 x 6-pin custom connector jumper wire
Quick specs
- Model No. / Name
- Board
- Operating Voltage (V)
- 3.3 to 5
- No. of Pins
- 6
- Length (mm)
- 44
- Width (mm)
- 19
- Weight (g)
- 13



















