
1 / 3 · Click to enlarge
AI Summary
A Raspberry Pi 5 HAT that adds an M.2 E Key slot for NGFF wireless NICs and 802.3af/at PoE power over a single Ethernet cable. It also passes 12V at up to 2A to your own peripherals through a 2-pin header.
Key Highlights
- M.2 E Key slot for NGFF wireless network interface cards
- IEEE 802.3af/at PoE support for power and data over one cable
- 16-pin PCIe interface connects the HAT to the Raspberry Pi 5
- 40-pin GPIO header allows stacking of additional HATs
- 37V to 57V DC input with 12V 2A output on a 2-pin header
- Compact 56.0 x 85.0 mm board footprint
Ideal For
- Raspberry Pi 5 owners adding an M.2 E Key wireless NIC
- Makers building PoE-powered Pi 5 nodes with minimal cabling
- Integrators deploying compact networked sensors or controllers
- Hobbyists stacking HATs who need extra 5V and 12V outputs
Buying Tip
Check that your PoE injector or switch supplies voltage within the 37V to 57V DC range and that your wireless card uses the M.2 E Key layout before ordering.
Elecvora expert review
Our verdict
A tidy two-in-one HAT that saves space and cabling on Raspberry Pi 5 builds needing both wireless networking and PoE. It is a practical choice for fixed installations where a single Ethernet run is preferable to separate power adapters.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Combines an M.2 E Key slot with 802.3af/at PoE on one board
- 40-pin GPIO header stays available for stacking
- 12V 2A output plus 5V and 12V headers for peripherals
- Compact 56.0 x 85.0 mm footprint
Cons
- Requires a PoE source within the 37V to 57V DC range
- Wireless card and antennas are not included
- PoE operation depends on the network equipment you already have
Best for
Raspberry Pi 5 projects that need PoE power and an M.2 E Key wireless card in one stack
Not ideal for
Builds that need a bundled wireless NIC or a plug-and-play USB Wi-Fi adapter
Specifications
| Model No. / Name | Adapter Board |
|---|---|
| Network | IEEE 802.3af/at PoE |
| Additional Specs. | M.2 Slot : M.2 E Key |
| Power Input | 37V ~ 57V DC in |
| Power Output | 12V 2A |
| Dimensions (L x W x H) mm | 56.0 × 85.0 |
| Shipping Weight | 0.25 kg |
| Shipping Dimensions | 11 × 8 × 3 cm |
What's in the box
- 1 x PoE M.2 E Key HAT+
- 1 x USB Type-C adapter (E)
- 2 x IPEX 1 to IPEX 4 adapter cables, about 6 cm
- 1 x 16-pin PCIe cable, 40 mm
- 1 x Screws pack
Frequently Asked Questions
What does this HAT add to a Raspberry Pi 5?
Which wireless cards fit the slot?
What input voltage does the PoE side need?
What power can I draw from the headers?
Can I stack other HATs on top?
What comes in the package?
Overview
The Waveshare PCIe to M.2 E Key Adapter with PoE Function is a Raspberry Pi 5 PCIe HAT built for projects that need both wireless networking and a tidy power setup. It provides an M.2 E Key slot for NGFF wireless NICs and adds IEEE 802.3af/at Power over Ethernet, so one Ethernet cable can carry network traffic and power at the same time.
The board connects to the Raspberry Pi 5 through a 16-pin PCIe interface and keeps a 40-pin GPIO header available for stacking additional HATs. Power arrives as 37V to 57V DC and is made available as 12V at up to 2A through a 2-pin header, with 5V and 12V header outputs for peripherals.
Key Features
- M.2 E Key slot for NGFF wireless network interface cards
- IEEE 802.3af/at PoE for combined power and data over Ethernet
- 16-pin PCIe interface for Raspberry Pi 5 integration
- 40-pin GPIO header for stacking further HATs
- 12V 2A output on a 2-pin header for external devices
- 5V and 12V header outputs for powering extra hardware
Specifications Explained
M.2 E Key slot
The M.2 E Key slot is the standard keying used by many NGFF wireless NICs. It lets you fit a compatible card directly on the HAT instead of using an external USB adapter, which keeps the build compact.
PoE input and outputs
The board accepts 37V to 57V DC in, matching the voltage range used by IEEE 802.3af/at PoE. It supplies 12V at up to 2A through a 2-pin header, and the 5V and 12V header outputs can feed additional low-power devices in the same enclosure.
Size and mounting
At 56.0 x 85.0 mm, the board follows a compact HAT footprint that fits neatly over a Raspberry Pi 5 while leaving the GPIO header accessible for stacking.
Compatibility and Requirements
- Designed for the Raspberry Pi 5 via its 16-pin PCIe interface
- Works with NGFF M.2 E Key wireless NICs
- Requires a PoE source within the 37V to 57V DC input range for PoE operation
- Use the supplied 16-pin PCIe cable to link the HAT to the Pi 5
Typical Uses
This HAT suits compact Raspberry Pi 5 nodes where a single Ethernet run is easier than separate power and data cables, such as wall-mounted sensors, small network appliances and lab test rigs. The M.2 E Key slot is useful when you want a wireless NIC mounted directly on the board, and the 12V and 5V outputs help power small accessories from the same stack.
What's in the Box
- 1 x PoE M.2 E Key HAT+
- 1 x USB Type-C adapter (E)
- 2 x IPEX 1 to IPEX 4 adapter cables, about 6 cm
- 1 x 16-pin PCIe cable, 40 mm
- 1 x Screws pack

Quick specs
- Model No. / Name
- Adapter Board
- Network
- IEEE 802.3af/at PoE
- Additional Specs.
- M.2 Slot : M.2 E Key
- Power Input
- 37V ~ 57V DC in
- Power Output
- 12V 2A
- Dimensions (L x W x H) mm
- 56.0 × 85.0



















