
1 / 4 · Click to enlarge
AI Summary
A compact Raspberry Pi add-on built on the PCM5122 stereo DAC, delivering high-fidelity audio over I2S with both 3.5mm and RCA outputs. Onboard EEPROM lets Raspberry Pi OS detect the board automatically, so setup stays simple.
Key Highlights
- PCM5122 stereo DAC chip for high-fidelity audio output
- I2S digital audio with I2C control interface
- Supports up to 384kHz sampling and 32-bit resolution
- 3.5mm headphone jack plus RCA speaker outputs
- Onboard EEPROM for automatic driver detection
- Fits all Raspberry Pi models via 40-pin GPIO header
Ideal For
- Raspberry Pi owners building a DIY network music player
- Makers adding RCA output to a Pi-based amplifier setup
- Headphone listeners who want a dedicated DAC on the Pi
- Developers working on audio processing and DSP projects
Buying Tip
Check that your Raspberry Pi OS image is current before fitting the board, since the onboard EEPROM relies on the OS to detect and load the correct driver automatically.
Elecvora expert review
Our verdict
A tidy, well-focused DAC add-on that gives a Raspberry Pi a proper stereo output without extra power wiring. The dual 3.5mm and RCA outputs plus automatic EEPROM detection make it an easy choice for Pi audio builds.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- PCM5122 DAC with support for up to 384kHz and 32-bit audio
- Both headphone jack and RCA outputs on one board
- Onboard EEPROM simplifies driver setup on Raspberry Pi OS
- Powered directly from the GPIO header, no extra supply
Cons
- Requires a Raspberry Pi and a separate OS install to use
- Header may need soldering depending on how you mount it
- No onboard volume knob, so control is done in software
Best for
Raspberry Pi owners who want clean stereo audio for music players and streaming boxes
Not ideal for
Buyers looking for a standalone USB DAC or a plug-and-play speaker system
Specifications
| Item Type | Audio DAC Board |
|---|---|
| Model No. / Name | PCM5122 Audio Board |
| Compatibility | Raspberry Pi |
| Interface | I2S , I2C |
| Power Supply Voltage (V) | Raspberry Pi GPIO |
| Length (mm) | 60 |
| Width (mm) | 29 |
| Weight (g) | 13 |
| Shipping Weight | 0.043 kg |
| Shipping Dimensions | 10.5 × 8 × 2 cm |
What's in the box
- 1 x Waveshare PCM5122 HIFI I2S DAC Audio Board for Raspberry Pi
- 1 x 2x20-pin header
- 1 x Fitting accessory set
Frequently Asked Questions
Which Raspberry Pi models does this board work with?
How is the board powered?
What audio outputs does it provide?
What audio formats can the DAC handle?
What is included with the board?
How should I look after the board?
Overview
The Waveshare PCM5122 HIFI I2S DAC Audio Board gives a Raspberry Pi a dedicated stereo audio path instead of relying on the onboard analog output. At its centre is the PCM5122 DAC chip, which receives digital audio over the I2S bus and converts it to analog for the 3.5mm headphone jack or the RCA connectors. Volume and chip settings are handled over I2C, and the board draws its power from the Raspberry Pi GPIO header, so no separate supply is needed.
Because the board carries an onboard EEPROM, Raspberry Pi OS can identify it and load the correct driver automatically. That keeps the software side short and lets you focus on the build. The PCB measures 60 x 29mm and weighs around 13g, so it sits neatly over the Pi without adding bulk.
Key Features
- PCM5122 stereo DAC for clean two-channel analog output from digital sources.
- I2S audio interface for high-fidelity digital transmission, with I2C for control.
- Dual outputs: a 3.5mm headphone jack for direct listening and RCA sockets for powered speakers or amplifiers.
- High-resolution support: sampling rates up to 384kHz and 32-bit audio resolution.
- Automatic detection through onboard EEPROM on Raspberry Pi OS.
- GPIO powered: runs directly from the Raspberry Pi 40-pin header.
Specifications Explained
32-bit resolution and up to 384kHz sampling describe how much detail the DAC can accept from a digital file or stream. Higher bit depth gives more headroom, and higher sampling rates cover high-resolution audio libraries. What you actually hear depends on your source files and player software.
I2S plus I2C means audio data and control commands travel on separate lines. I2S keeps the audio stream clean, while I2C lets the Pi adjust the DAC's settings. GPIO power means the board is fed from the Pi itself, keeping the wiring simple.
The 3.5mm jack suits headphones and small powered speakers, while the RCA outputs are the better match for a hi-fi amplifier or active speaker set.
Compatibility and Requirements
The board is designed for Raspberry Pi and connects through the standard 40-pin GPIO header. A Raspberry Pi running Raspberry Pi OS is required, and the onboard EEPROM supports automatic driver detection on that platform. You will also need a microSD card with the OS installed and a way to play or stream audio to the Pi.
Typical Uses
- DIY network music players and streaming boxes.
- Headphone listening stations built around a Raspberry Pi.
- Audio processing and DSP experiments on the Pi.
- Adding RCA output to a Pi-based amplifier or speaker setup.
What's in the Box
- 1 x Waveshare PCM5122 HIFI I2S DAC Audio Board for Raspberry Pi
- 1 x 2x20-pin header
- 1 x Fitting accessory set
Quick specs
- Item Type
- Audio DAC Board
- Model No. / Name
- PCM5122 Audio Board
- Compatibility
- Raspberry Pi
- Interface
- I2S , I2C
- Power Supply Voltage (V)
- Raspberry Pi GPIO
- Length (mm)
- 60



















