
1 / 3 · Click to enlarge
AI Summary
A compact RP2040 development board with a dual-core Arm Cortex M0+ processor, 264KB SRAM, 2MB flash and a USB-C connector. Its castellated edges and solder points let you mount it directly onto a carrier board for low-profile builds.
Key Highlights
- Raspberry Pi RP2040 dual-core Arm Cortex M0+ processor up to 133 MHz
- 264KB SRAM and 2MB flash memory onboard
- USB-C connector for power and drag-and-drop programming
- Castellated module edges allow direct soldering to carrier boards
- 29 multi-function GPIO pins, 20 available via edge pinout
- 8 programmable I/O state machines for custom peripherals
Ideal For
- Makers building low-profile embedded projects
- Electronics students learning the RP2040 platform
- Engineers soldering modules directly onto carrier boards
- Prototypers needing multiple PWM, ADC and serial interfaces
- Hobbyists creating custom PIO-based peripherals
Buying Tip
Check that you are happy to solder, since this version ships without a pre-fitted header and is intended for direct mounting or your own pin arrangement.
Elecvora expert review
Our verdict
The RP2040-Zero Without Header packs the RP2040's dual-core performance and rich peripheral set into a very small board with useful castellated edges. It is a sensible choice for compact, solder-in projects where a full-size Pico would be too large.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Compact footprint with castellated edges for direct soldering
- Dual-core RP2040 at up to 133 MHz with 264KB SRAM and 2MB flash
- USB-C with drag-and-drop programming
- Onboard BOOT and RESET buttons plus WS2812 RGB LED
- Rich peripherals including PIO, ADC and PWM
Cons
- Ships without a pre-soldered header, so soldering is required
- Only 20 GPIO available through the edge pinout
- No wireless connectivity on this board
Best for
Compact solder-in RP2040 projects
Not ideal for
Users who want a plug-and-play breadboard board with headers already fitted
Specifications
| USB | Type-C |
|---|---|
| Memory Capacity | 264KB of SRAM 2MB of Flash memory |
| Shipping Weight | 0.003 kg |
| Shipping Dimensions | 8 × 6 × 1 cm |
What's in the box
- 1 x Waveshare RP2040-Zero Without Header
Frequently Asked Questions
Do I need a separate programmer for this board?
Does this version come with pin headers attached?
How much memory does the board have?
How do I enter download mode?
How many GPIO pins can I use?
What is included in the package?
Overview
The Waveshare RP2040-Zero Without Header is a small, low-cost microcontroller board built on the Raspberry Pi RP2040 chip. It is designed for makers, students and engineers who want Pico-like capability in a more compact form factor, and who are comfortable soldering the board into their own project rather than plugging it into a breadboard through pre-fitted headers.
The board combines a dual-core Arm Cortex M0+ processor with 264KB of SRAM and 2MB of flash memory, and exposes its connections through castellated edges and additional solder points. A USB-C connector keeps the board current and easy to connect, while onboard buttons and an RGB LED support quick testing.
Key Features
- RP2040 microcontroller designed by Raspberry Pi, with a dual-core Arm Cortex M0+ processor and a flexible clock up to 133 MHz
- USB-C connector for power and data, with USB 1.1 device and host support
- Castellated module edges that allow soldering directly to carrier boards
- 29 multi-function GPIO pins, 20 of them via the edge pinout and the rest via solder points
- 2MB NOR-flash and 264KB SRAM for program storage and working memory
- WS2812 RGB LED, BOOT and RESET buttons, and a low-dropout LDO rated at up to 800mA
- Low-power sleep and dormant modes, plus drag-and-drop programming over USB mass storage
Specifications Explained
The dual-core Cortex M0+ at up to 133 MHz gives the board enough headroom for control loops, sensor handling and simple signal processing. 264KB of SRAM is the working memory for your program, while 2MB of flash holds the firmware and can appear as a USB drive for drag-and-drop programming.
Peripheral support includes 2 SPI, 2 I2C and 2 UART interfaces, 4 12-bit ADC channels, 16 controllable PWM channels, an on-chip temperature sensor and accurate clock and timer hardware. 8 programmable I/O state machines let you create custom peripheral timing without loading the main cores. Accelerated floating-point libraries are included on-chip for faster maths.
Compatibility and Requirements
The board is programmed over its USB-C port using USB mass storage, so no separate programmer is required. Because it ships without a pre-soldered header, you will need to solder wires, pin headers or the castellated edges to your carrier board or project. A USB-C cable and a host computer are needed to power the board and transfer firmware.
Typical Uses
- Compact embedded projects where board height matters
- Direct-to-carrier-board soldering in custom electronics
- Learning and prototyping with the RP2040 ecosystem
- Projects needing multiple PWM, ADC or serial interfaces
- Custom peripheral work using the PIO state machines
What's in the Box
1 x Waveshare RP2040-Zero Without Header.

Quick specs
- USB
- Type-C
- Memory Capacity
- 264KB of SRAM 2MB of Flash memory
- Shipping Weight
- 0.003 kg
- Shipping Dimensions
- 8 × 6 × 1 cm



















