Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A DIN-rail RS232 to RS485/422 converter built on SP3232EEN and SP485EEN chips with digital and power isolation. It accepts 5 to 36 V DC and supports 300 to 921600 bps, with jumper-selectable 120R termination and 15KV ESD protection.

Key Highlights

  • Onboard SP3232EEN and SP485EEN chips for stable serial conversion
  • Wide 5 to 36 V DC input via onboard screw terminal
  • Digital and power isolation with low power consumption
  • 15KV ESD plus 600W surge and lightning protection
  • Jumper-selectable 120R resistor on the RS485/422 side
  • 35 mm DIN rail mount ABS case with three status LEDs

Ideal For

  • Industrial control and automation technicians
  • Integrators linking legacy RS232 instruments to RS485 buses
  • Electrical engineers working in DIN rail cabinets
  • Field service teams extending serial links over long cable runs

Buying Tip

Check whether your RS232 device needs a DB9 male port option, and enable the 120R jumper only at the ends of your RS485/422 bus.

Elecvora expert review

Our verdict

A well-protected, isolated converter that covers the practical needs of RS232 to RS485/422 links in cabinets. The wide input range and DIN rail case make installation straightforward.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Digital and power isolation on board
  • Wide 5 to 36 V DC input
  • Strong ESD and surge protection
  • Jumper-selectable 120R termination
  • Compact DIN rail ABS housing

Cons

  • 120R resistor is disabled by default and must be set manually
  • Long-distance links should stay at 115200 bps or below

Best for

Industrial serial integration and legacy equipment upgrades

Not ideal for

Applications needing wireless or network-based conversion

Specifications

Model No. / NameConverter
Power Supply Voltage (V)5 ~ 36
Baud Rate (bps)300 ~ 921600bps (300~115200bps is recommended for long-distance reliable communication)
Device PortRS232, RS485/422
Dimensions (L x W x H) mm81.9 × 54.0 × 32.0
EnclosureRail-mount ABS case, suitable for 35mm DIN rail
Shipping Weight0.028 kg
Shipping Dimensions15 × 11 × 5 cm

What's in the box

  • 1 x RS232 to RS485/422 converter
  • 1 x screwdriver

Frequently Asked Questions

What is the power supply range?
The converter accepts 5 to 36 V DC through the onboard power screw terminal. The isolated terminal does not need a separate supply.
Which baud rates are supported?
It supports 300 to 921600 bps. For long-distance reliable communication, 300 to 115200 bps is recommended.
How do I enable the 120R resistor?
A jumper on the board enables the 120R terminal resistor on the RS485/422 interface. It is disabled by default.
Does it protect against surges and static?
Yes. The board includes TVS suppression, a self-recovery fuse, protection diodes, 15KV ESD isolation and 600W lightning and surge protection.
How do I mount it?
The ABS case is designed for 35 mm DIN rail and measures 81.9 x 54.0 x 32.0 mm, so it fits standard industrial cabinets.
What is included in the package?
The package contains one RS232 to RS485/422 converter and one screwdriver.

Overview

The Waveshare RS232 to RS485/422 Active Digital Isolated Converter connects RS232 ports to RS485 or RS422 buses. It uses onboard SP3232EEN and SP485EEN chips, so the conversion is active rather than passive, and the isolated design keeps the two sides electrically separated.

Power comes from a screw terminal that accepts 5 to 36 V DC, and the isolated terminal needs no separate supply. The board is housed in a rail-mount ABS case sized for 35 mm DIN rail, which suits control cabinets and equipment racks.

Key Features

  • Active conversion: SP3232EEN and SP485EEN chips handle RS232 and RS485/422 signalling.
  • Digital and power isolation: signal isolation with low power consumption and stable isolated voltage.
  • Protection chain: TVS suppression, self-recovery fuse, protection diodes, 15KV ESD isolation and 600W lightning and surge protection.
  • Configurable termination: a 120R resistor on the RS485/422 interface is disabled by default and enabled by jumper.
  • Status feedback: three LEDs show power and transceiver activity.
  • Compact housing: 81.9 x 54.0 x 32.0 mm ABS case for 35 mm DIN rail.

Specifications Explained

Baud rate

The converter supports 300 to 921600 bps. For long cable runs, 300 to 115200 bps is recommended, because lower rates tolerate more cable loss and noise. Short cabinet-internal links can use the higher rates.

Power supply

A 5 to 36 V DC range gives room to run the unit from common industrial supplies. The isolated side draws its voltage from the onboard unibody isolation, so no second power source is needed.

Termination

The 120R resistor matches the characteristic impedance of a twisted-pair bus. It ships disabled; enable it by jumper only at the physical ends of the RS485/422 line.

Protection

TVS devices clamp transient spikes, the self-recovery fuse limits over-current, and the 15KV ESD and 600W surge ratings describe the transient events the circuit is designed to withstand.

Compatibility and Requirements

The unit works with RS232 equipment on one side and RS485 or RS422 devices on the other. An RS232 DB9 male port option is available for the RS232 connection. Plan for a 5 to 36 V DC supply and a DIN rail or panel space for the 81.9 x 54.0 x 32.0 mm case.

Typical Uses

  • Linking legacy RS232 instruments to an RS485 network
  • Extending serial links across longer cable runs
  • Industrial control and monitoring cabinets
  • Isolating serial ports from ground loops and surges

What's in the Box

The package includes one RS232 to RS485/422 converter and one screwdriver.

Quick specs

Model No. / Name
Converter
Power Supply Voltage (V)
5 ~ 36
Baud Rate (bps)
300 ~ 921600bps (300~115200bps is recommended for long-distance reliable communication)
Device Port
RS232, RS485/422
Dimensions (L x W x H) mm
81.9 × 54.0 × 32.0
Enclosure
Rail-mount ABS case, suitable for 35mm DIN rail
See all specifications