
1 / 3 · Click to enlarge
AI Summary
A dual-channel serial server that puts one RS232 and one RS485 device onto Ethernet at the same time, with two RJ45 ports for easy cascading. Web-based setup and a wide 6-45V DC input make it simple to deploy in industrial cabinets.
Key Highlights
- One RS232 and one RS485 port run independently and simultaneously
- Dual 10/100M RJ45 ports with 2KV surge protection
- Configurable via host, web browser or device management library
- Baud rates from 300 to 115200 bps and 5 to 9 data bits
- Powered by 5.5mm DC jack or 6-45V DC screw terminal
- Operating range of -40 to 85°C and 5 to 95% humidity
Ideal For
- Industrial automation engineers linking serial controllers to Ethernet
- System integrators building data acquisition cabinets
- IoT gateway projects needing RS232 and RS485 together
- Security and monitoring installers with serial field devices
- Technicians who prefer web-based device configuration
Buying Tip
Check whether your serial devices use RS232, RS485 or both, and confirm your supply voltage falls within the 6-45V DC screw terminal range before wiring.
Elecvora expert review
Our verdict
A practical dual-channel serial server that removes the need for two separate bridges when RS232 and RS485 equipment must share one network link. The dual Ethernet ports and wide DC input make it easy to fit into existing cabinets.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- RS232 and RS485 channels work simultaneously and independently
- Two RJ45 ports allow switching or cascading without extra hardware
- Broad 6-45V DC input plus a 5.5mm DC jack
- Web browser and library-based configuration
- Wide -40 to 85°C operating range
Cons
- No wireless connectivity; Ethernet cabling is required
- Serial parameters must be matched manually per device
- PoE is not included in this configuration
Best for
Industrial cabinets that need RS232 and RS485 devices on one Ethernet link
Not ideal for
Users who need a Wi-Fi or fully wireless serial bridge
Specifications
| Communication Mode | RS232 port × 1, RS485 port × 1, Ethernet port × 2 |
|---|---|
| Power Supply Voltage (V) | DC 5.5 power port, 6 ~ 45V DC screw terminal |
| Ethernet | 10 / 100M auto-negotiation RJ45 connector, 2 KV surge protection |
| Baud Rate (bps) | 300 to 115200 bps |
| Data Bit | 5 to 9 bits |
| Protocol | ETHERNET, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS |
| Configuration | host, web browser, device management functions library |
| Operating Temperature (°C) | -40℃ ~ 85℃ |
| Humidity Range | 5% to 95% relative humidity |
| Shipping Weight | 0.148 kg |
| Shipping Dimensions | 11 × 8 × 3 cm |
What's in the box
- 1 x Waveshare RS232 RS485 to RJ45 Ethernet Serial Server
Frequently Asked Questions
Can the RS232 and RS485 ports be used at the same time?
How is the module powered?
What baud rates are supported?
How do I configure the device?
What is the second Ethernet port for?
What is included in the package?
Overview
The Waveshare RS232 RS485 to RJ45 Ethernet Serial Server is a compact bridge between serial equipment and an IP network. It carries one RS232 port and one RS485 port that work independently, so two different serial devices can be reached over the network at the same time without interfering with each other. Two Ethernet ports are provided, allowing the unit to sit on a network and also serve as a switch or cascade point for another device.
Key Features
- Dual independent serial channels: one RS232 port and one RS485 port operate simultaneously.
- Dual Ethernet ports: two 10/100M auto-negotiation RJ45 connectors with 2KV surge protection.
- Flexible configuration: set up through a host, a web browser or the device management function library.
- Wide serial range: baud rates from 300 to 115200 bps and data bits from 5 to 9.
- Two power inputs: a 5.5mm DC power port and a 6-45V DC screw terminal.
- Industrial tolerance: rated for -40 to 85°C and 5% to 95% relative humidity.
Specifications Explained
The two serial ports are the core of the product. RS232 suits short-run links to instruments and controllers, while RS485 handles longer multi-drop buses; because each has its own channel, you do not have to choose between them. The dual RJ45 ports mean one cable can feed the module and a second port can extend the network to another device, which reduces cabling in a cabinet.
The supported protocol set covers ETHERNET, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP and DNS, so the unit can obtain an address automatically or be configured statically. The 6-45V DC screw terminal accepts a broad supply range, while the 5.5mm DC jack offers a quick bench-test option. The -40 to 85°C rating and 5% to 95% humidity range indicate the module is built for uncontrolled industrial environments rather than a desk.
Compatibility and Requirements
The module works with serial devices that use RS232 or RS485 signalling within the stated baud rate and data bit ranges. Network access requires an Ethernet connection and a DHCP server or a static IP plan. Configuration needs a host computer with a web browser or the device management library. Power must be supplied through either the DC jack or the screw terminal within the 6-45V DC range.
Typical Uses
- Bringing serial instruments and meters onto an Ethernet network
- Data acquisition points in industrial cabinets
- IoT gateway roles for safety, security and monitoring systems
- Cascading network links through the second RJ45 port
What's in the Box
One Waveshare RS232 RS485 to RJ45 Ethernet Serial Server.
Quick specs
- Communication Mode
- RS232 port × 1, RS485 port × 1, Ethernet port × 2
- Power Supply Voltage (V)
- DC 5.5 power port, 6 ~ 45V DC screw terminal
- Ethernet
- 10 / 100M auto-negotiation RJ45 connector, 2 KV surge protection
- Baud Rate (bps)
- 300 to 115200 bps
- Data Bit
- 5 to 9 bits
- Protocol
- ETHERNET, IP, TCP, UDP, HTTP, ARP, ICMP, DHCP, DNS



















