Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: can controller MCP2515; can transceiver SN65HVD230; rs485 transceiver SP3485.

Key Highlights

  • Can controller: MCP2515
  • Can transceiver: SN65HVD230
  • RS485 transceiver: SP3485

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Can controllerMCP2515
Can transceiverSN65HVD230
RS485 transceiverSP3485
Mounting Hole Diameter (mm)3
Length (mm)65
Width (mm)30
Weight (g)18
Shipping Weight0.02 kg
Shipping Dimensions7 × 3 × 2 cm

Overview

The Waveshare RS485 CAN HAT for Raspberry Pi, made by WAVESHARE, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Can controller: MCP2515
  • Can transceiver: SN65HVD230
  • RS485 transceiver: SP3485
  • Mounting Hole Diameter (mm): 3
  • Length (mm): 65 (measure your mounting space before ordering)
  • Width (mm): 30 (measure your mounting space before ordering)
  • Weight (g): 18 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.02 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

The Waveshare RS485 CAN HAT for Raspberry Pi will enable your Pi to communicate with other devices stably in long-distance via RS485/CAN functions.

RS485 is one of the most robust wired serial communication protocol that can support distance up to 1200 meters (4000 ft) while CAN (Controller Area Network) is used in automotive that offer high immunity to noise in cars.

Waveshare RS485 CAN HAT for Raspberry Pi

Yes, this board support both RS485 and CAN, bidirectional communication. You can use both the standards/protocols at the same time because each of them uses different peripherals for communication. CAN controller uses SPI while RS485 uses UART from Raspberry Pi.


Features:

  1. Standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards
  2. CAN function, onboard CAN controller MCP2515 via SPI interface, onboard transceiver SN65HVD230
  3. RS485 function, controlled via UART, half-duplex communication, supports automatic TX/RX control without programming, onboard transceiver SP3485
  4. Onboard TVS (Transient Voltage Suppressor), effectively suppress surge voltage and transient spike voltage in the circuit for RS485 transceiving, lightning-proof & anti-electrostatic
  5. Reserved control pins, allows working with other control boards
  6. Comes with development resources and manual (examples in wiringPi/python)

Useful link:

To do the Software setup, please follow this tutorial.

Package Includes: 

1 x Waveshare RS485 CAN HAT

1 x RPi screws pack (2pcs)

Quick specs

Can controller
MCP2515
Can transceiver
SN65HVD230
RS485 transceiver
SP3485
Mounting Hole Diameter (mm)
3
Length (mm)
65
Width (mm)
30
See all specifications