Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by WAVESHARE, this usb interface module is a good fit for makers, students and electronics hobbyists. Main specs: model no. / name Converter; power consumption (w) <1W; ethernet Connector: 4-pin RJ45 Communication rate: 10/100Mbps Interface protection: 1.5KV electromagnetic isolation.

Key Highlights

  • Model No. / Name: Converter
  • Power Consumption (W): <1W
  • Ethernet: Connector: 4-pin RJ45 Communication rate: 10/100Mbps Interface protection: 1.5KV electromagnetic isolation

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Model No. / NameConverter
Power Consumption (W)<1W
EthernetConnector: 4-pin RJ45 Communication rate: 10/100Mbps Interface protection: 1.5KV electromagnetic isolation
RS485Connector: screw terminal (A+, B-, GND) Baudrate: 600bps~230.4Kbps
Length (mm)69.6
Width (mm)63.5
Weight (g)225
Shipping Weight0.235 kg
Shipping Dimensions7 × 7 × 3 cm

Overview

The Waveshare RS485 to Ethernet Converter, made by WAVESHARE, is listed in our usb interface module range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Model No. / Name: Converter
  • Power Consumption (W): <1W
  • Ethernet: Connector: 4-pin RJ45 Communication rate: 10/100Mbps Interface protection: 1.5KV electromagnetic isolation (space for firmware, files or media)
  • RS485: Connector: screw terminal (A+, B-, GND) Baudrate: 600bps~230.4Kbps (confirm your cable or board uses the same connector)
  • Length (mm): 69.6 (measure your mounting space before ordering)
  • Width (mm): 63.5 (measure your mounting space before ordering)
  • Weight (g): 225 (important for drones, RC models and anything you carry)
  • Shipping Weight: 0.235 kg (important for drones, RC models and anything you carry)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

This is a Waveshare RS485 to Ethernet Converter. The RS485 TO ETH module provides an easy way to communicate between RS485 and RJ45 port Ethernet. It can be configured via a webpage, AT commands, serial protocol, and network protocol provides configuration protocol that can be integrated into your own software. It supports customized heartbeat packets and customized registration packets which makes sure the connection is truthful, as well as actively retrieving sensor data and auto passing the registered packet as identifier after the connection is established so that different devices can be distinguished. The RS485 to Ethernet Converter comes with several working modes such as TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST). etc.

Useful Link:

https://www.waveshare.com/wiki/RS485_TO_ETH

Features: 

  1. M0 series 32-bit ARM processor, fast speed, high efficiency
  2. 10/100M Auto-MDI/MDIX Ethernet interface, regardless of cross-over or straight-through cable
  3. Configurable RS485 baud rate (600bps~230.4Kbps), supports five parity check options: None, Odd, Even, Mark, Space
  4. Available working modes: TCP Server, TCP Client, UDP Server, UDP Client, HTTPD Client (supports GET and POST)
  5. Supports DNS domain name resolution, configurable DNS server
  6. Supports DHCP, auto-obtained IP, or static IP
  7. Firmware is upgradable via the network
  8. Restore to factory settings via software and/or hardware
  9. Comes with a default MAC address, which is customizable
  10. Provided software: module configuration software, TCP/UDP testing tool, VCOM virtual serial port software
  11. Example code: host computer (socket ), VB, C++, Delphi, Android, iOS, etc.
Note : Power adapter not included in kit.

Package Includes: 

1 x RS485 to Ethernet Converter for EU  

Quick specs

Model No. / Name
Converter
Power Consumption (W)
&lt;1W
Ethernet
Connector: 4-pin RJ45 Communication rate: 10/100Mbps Interface protection: 1.5KV electromagnetic isolation
RS485
Connector: screw terminal (A+, B-, GND) Baudrate: 600bps~230.4Kbps
Length (mm)
69.6
Width (mm)
63.5
See all specifications