
1 / 3 · Click to enlarge
AI Summary
A solar and USB-C charging module that manages three 18650 Li-ion cells and outputs a regulated 5V/3A for your projects. MPPT tracking and multi-protection circuits help it run efficiently and safely in remote, off-grid installations.
Key Highlights
- MPPT tracking for higher solar panel harvesting efficiency
- Accepts 6V-24V solar panels via DC jack or screw terminal
- USB-C input with PD quick charge support for fast charging
- Regulated 5V/3A output supporting PD, QC, FCP, PE and SFCP
- Over-charge, over-discharge, overheat and over-current protection
- LED indicators for solar panel and battery status
Ideal For
- Makers building solar-powered IoT sensor nodes
- Engineers deploying remote environmental monitoring stations
- Students learning solar energy harvesting and battery management
- Hobbyists powering 5V microcontroller projects off-grid
- Field technicians needing a compact 5V solar power stage
Buying Tip
Confirm your solar panel's open-circuit voltage stays within the 6V-24V input window, and budget for three quality 18650 cells since they are not included.
Elecvora expert review
Our verdict
A tidy all-in-one solar charging and 5V regulation board that removes much of the design work from off-grid projects. MPPT and thorough protection make it a sensible core for remote IoT power.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- MPPT improves usable energy from the panel
- Wide 6V-24V solar input with self-adaptive voltage
- USB-C PD input adds a reliable backup charging path
- Regulated 5V/3A output with multiple fast-charge protocols
- Broad -40 to +85 °C operating range
Cons
- 18650 batteries are not included
- Output is limited to 5V, so other rails need extra conversion
- Enclosure and wiring are not supplied
Best for
Solar-powered IoT and remote monitoring projects needing a stable 5V rail
Not ideal for
Projects that need output voltages other than 5V without extra converters
Specifications
| Solar input voltage | 6 ~ 24 |
|---|---|
| Batteries Required | 3x 18650 Li-ion battery (NOT included) |
| USB Input voltage(V) | 5V (TYPE-C, with PD quick charge support) |
| Operating Temperature (°C) | -40 to +85 °C |
| Shipping Weight | 0.175 kg |
| Shipping Dimensions | 15 × 11 × 5 cm |
What's in the box
- 1 x Waveshare Solar Power Manager Module (D)
- 1 x 5V/3A regulated output battery holder
Frequently Asked Questions
What solar panel can I use with this module?
Are batteries included?
What output does it provide?
Can I charge it without sunlight?
How do I know the charging status?
Is it safe to leave connected?
Overview
The Waveshare Solar Power Manager Module (D) is a self-contained energy harvesting and battery management board for small off-grid systems. It takes power from a 6V to 24V solar panel or a USB-C adapter, stores it in three 18650 Li-ion cells, and supplies a clean regulated 5V/3A rail to your load. Because the input is self-adaptive across the full 6V-24V solar range, you can pair the module with a wide variety of panels without extra configuration.
Key Features
- MPPT tracking: the module continuously adjusts to keep the solar panel near its maximum power point, so more of the available sunlight becomes usable charge.
- Dual charging sources: charge from a solar panel through the DC-002 jack or screw terminal, or from a USB-C adapter with PD quick charge support.
- Regulated output: a stable 5V/3A output supports PD, QC, FCP, PE and SFCP protocols for compatible devices.
- Protection circuits: over-charge, over-discharge, overheat and over-current protection, plus input anti-reverse protection on the solar input.
- Status LEDs: multiple indicators let you monitor solar panel and battery conditions without a multimeter.
Specifications Explained
Solar input: 6V to 24V
This wide window covers small 6V panels up to larger 24V arrays, and the input voltage adapts automatically. The DC-002 jack and screw terminals give you two wiring options, and anti-reverse protection guards against swapped leads.
Battery: 3x 18650 Li-ion (not included)
The board is built around three 18650 cells, which set your runtime and reserve capacity. Cells are not supplied, so choose reputable protected or unprotected cells suited to your project and install them in the included holder.
USB-C input: 5V with PD quick charge support
When sun is scarce, a USB-C adapter can top up the cells. PD support means compatible chargers can negotiate higher charging power.
Output: 5V/3A regulated
The output stays at 5V regardless of battery state, so sensitive electronics see a steady supply. Protocol support lets it work with a range of USB-C and fast-charge devices.
Operating temperature: -40 to +85 °C
A broad operating range makes the module viable in hot enclosures and cold outdoor installations alike.
Compatibility and Requirements
You need a 6V-24V solar panel and/or a USB-C power adapter, plus three 18650 Li-ion batteries, which are not included. The regulated output is 5V/3A. Loads that require other voltages need their own conversion stage.
Typical Uses
- Solar-powered IoT nodes and remote sensor hubs
- Environmental monitoring and weather station builds
- Off-grid 5V power for microcontrollers and dev boards
- Portable solar chargers for small USB-C gadgets
- Educational and maker projects exploring energy harvesting
What's in the Box
- 1 x Waveshare Solar Power Manager Module (D)
- 1 x 5V/3A regulated output battery holder


Quick specs
- Solar input voltage
- 6 ~ 24
- Batteries Required
- 3x 18650 Li-ion battery (NOT included)
- USB Input voltage(V)
- 5V (TYPE-C, with PD quick charge support)
- Operating Temperature (°C)
- -40 to +85 °C
- Shipping Weight
- 0.175 kg
- Shipping Dimensions
- 15 × 11 × 5 cm



















