
1 / 3 · Click to enlarge
AI Summary
A compact USB Type-C to TTL UART converter built on the FT232RNL chip, supporting 300bps to 3Mbps and 3.3V or 5V logic. TXD and RXD LEDs plus onboard over-current and over-voltage protection make serial debugging safer and easier to follow.
Key Highlights
- FT232RNL chip for fast, stable USB to TTL conversion
- USB Type-C port for smooth, reliable plugging
- Baud rate range from 300bps up to 3Mbps
- Self-recovery fuse and ESD diode protection onboard
- TXD and RXD indicators show transmit and receive activity
- Castellated holes for easy soldering into projects
Ideal For
- Embedded developers debugging microcontroller UART consoles
- Makers building sensor and breadboard projects
- Students learning serial communication basics
- Repair technicians checking TTL-level boards
- Hardware designers integrating a serial bridge into a PCB
Buying Tip
Check whether your target device needs 3.3V or 5V logic before wiring, since the module ships set to 3.3V and changing to 5V requires re-soldering the VCC pads on the back.
Elecvora expert review
Our verdict
A tidy, well-protected USB to TTL bridge that covers the essentials without clutter. The FT232RNL chip, wide baud range and onboard protection make it a sensible everyday serial tool.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- FT232RNL chip for stable, compatible serial communication
- Baud range from 300bps to 3Mbps covers slow and fast links
- Self-recovery fuse and ESD diode add real protection
- TXD and RXD LEDs simplify troubleshooting
- Castellated holes and full pin breakout aid integration
Cons
- Switching to 5V logic requires re-soldering the back pads
- No cable or jumper wires are included
- Very small board, so handling and soldering need care
Best for
Developers and makers who need a reliable USB to TTL serial link for microcontrollers and sensors
Not ideal for
Users who want a ready-made cable assembly with no soldering or wiring involved
Specifications
| Model No. / Name | Communication Module |
|---|---|
| Operating Voltage (V) | 3.3 to 5 |
| Chip | FT232RNL |
| Port | USB Type-C |
| Baud Rate (bps) | 300bps~3Mbps |
| Shipping Weight | 0.005 kg |
| Shipping Dimensions | 11 × 7 × 0.1 cm |
What's in the box
- 1 x Waveshare USB to UART (TTL) Mini Communication Module
Frequently Asked Questions
What does this module actually do?
What baud rates are supported?
Is it 3.3V or 5V?
How do I connect it to my device?
What protection does the board include?
What is included in the package?
Overview
The Waveshare USB to UART (TTL) Mini Communication Module converts a USB Type-C connection into TTL-level UART signals, letting a computer or USB host talk to logic-level devices such as microcontrollers and sensors. It is built around the FT232RNL chip and arrives as a very small board, making it simple to drop into a project, a test rig or a breadboard setup.
Because the module works at both 3.3V and 5V, it covers a wide range of low-voltage serial devices. The default logic level is 3.3V, and the back of the board carries VCC switching pads for changing that to 5V by re-soldering.
Key Features
- FT232RNL chip: handles USB to TTL conversion with fast, stable communication and good compatibility.
- USB Type-C port: a modern, reversible connector that plugs and unplugs smoothly.
- Wide baud rate range: 300bps to 3Mbps to match slow debug consoles and faster data links.
- Protection onboard: a self-recovery fuse and ESD diode guard against over-current and over-voltage events.
- Status LEDs: TXD and RXD indicators let you see transmit and receive activity at a glance.
- Castellated holes: solder the module directly onto a carrier board or into a finished design.
- Full pin access: all function pins of the chip are broken out for secondary development.
Specifications Explained
Voltage and logic level
The module runs from 3.3V to 5V and uses 3.3V TTL by default. If your target device expects 5V logic, the VCC switching pads on the back can be re-soldered to change the level. Always confirm the logic level your device needs before connecting.
Baud rate
Support for 300bps through 3Mbps means the same module can serve a slow serial console and a faster data link without swapping hardware. The rate is selected in your terminal or host software.
Chip and connection
The FT232RNL is a dedicated USB to serial bridge, and the USB Type-C port provides the host connection. Data then leaves the board on the TTL side for your target device.
Compatibility and Requirements
The module connects to a USB host through its Type-C port and to TTL logic-level devices on the UART side. It supports 3.3V and 5V operation, with 3.3V as the factory default. You will need a USB cable and host software that can open a serial port at your chosen baud rate. Confirm the voltage and pin order of your target board before wiring.
Typical Uses
- Serial debugging and console access for microcontroller projects
- Connecting sensors and other TTL devices to a computer
- Firmware flashing and log capture where a UART link is required
- Prototyping on breadboards and carrier boards
- Integrating a serial bridge into a custom enclosure or PCB
What's in the Box
1 x Waveshare USB to UART (TTL) Mini Communication Module.
Quick specs
- Model No. / Name
- Communication Module
- Operating Voltage (V)
- 3.3 to 5
- Chip
- FT232RNL
- Port
- USB Type-C
- Baud Rate (bps)
- 300bps~3Mbps
- Shipping Weight
- 0.005 kg



















