
1 / 2 · Click to enlarge
At a glance
This current and voltage sensor modules is a good fit for makers, students and electronics hobbyists. Main specs: item type Current Sensor; model no. / name Hall Current Sensor; wire diameter (mm) 9mm.
Key Highlights
- Item Type: Current Sensor
- Model No. / Name: Hall Current Sensor
- Wire Diameter (mm): 9mm
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Current Sensor |
|---|---|
| Model No. / Name | Hall Current Sensor |
| Wire Diameter (mm) | 9mm |
| Output Current Sink | 0.4mA |
| Current detection resolution | 32mV / A |
| Length (mm) | 5 |
| Width (mm) | 5 |
| Weight (g) | 10 |
| Shipping Weight | 0.015 kg |
| Shipping Dimensions | 5 × 5 × 5 cm |
Overview
The WCS1700 Hall Current Sensor with OC Protection is listed in our current and voltage sensor modules range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Current Sensor (your supply must deliver at least this much current)
- Model No. / Name: Hall Current Sensor (your supply must deliver at least this much current)
- Wire Diameter (mm): 9mm
- Output Current Sink: 0.4mA (your supply must deliver at least this much current)
- Current detection resolution: 32mV / A (your supply must deliver at least this much current)
- Length (mm): 5 (measure your mounting space before ordering)
- Width (mm): 5 (measure your mounting space before ordering)
- Weight (g): 10 (important for drones, RC models and anything you carry)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The WCS1700 current sensor provides economical and precise solutions for both DC and AC current sensing in industrial, commercial, and communications systems.
The unique package provides easy implementation without breaking the original system and makes current sensing possible. Typical applications include motor control, load detection and management, over-current fault detection, and any intelligent power management system, etc. The WCS1700 consists of a precise, low-temperature drift linear hall sensor IC with a temperature compensation circuit and diameter of 9.0mm through-hole. Users can use the system’s own electric wire to bypass it through this hole to measure passing current. This design allows system designers to monitor any current path without breaking or changing the original system layout at all. Any current flowing through this hole will generate a magnetic field that is sensed by the integrated Hall IC and converted into a proportional voltage.
Features:
- The current detection resolution of 32mV / A
- Output overcurrent signal indication
- Overcurrent signal is set critical point adjustable settings Resolution 3A
- With mounting holes for easy firmware installation
- Sampling current converting analog signal output, which can be accessed ADC, TTL level signal output, which can be accessed microcontroller IO port control.
- The output signal is the signal level of the analog signal.
- Maximum current sensing range : 70A
Package Includes:
1 x WCS1700 Hall Current Sensor with Over Current Protection
Quick specs
- Item Type
- Current Sensor
- Model No. / Name
- Hall Current Sensor
- Wire Diameter (mm)
- 9mm
- Output Current Sink
- 0.4mA
- Current detection resolution
- 32mV / A
- Length (mm)
- 5













