
1 / 5 · Click to enlarge
At a glance
This buck converter is a good fit for makers, students and electronics hobbyists. Main specs: output power (w) 200; output voltage 1.25 to 36VDC; efficiency 0.94. Check that your power source supplies 4 to 40VDC before connecting it.
Key Highlights
- Output Power (W): 200
- Output Voltage: 1.25 to 36VDC
- Efficiency: 0.94
Ideal For
- Everyday use
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Output Power (W) | 200 |
|---|---|
| Input Voltage (V) | 4 to 40VDC |
| Output Voltage | 1.25 to 36VDC |
| Efficiency | 0.94 |
| Length (mm) | 61 |
| Width (mm) | 41 |
| Weight (g) | 51 |
| Switching frequency | 180 |
| Shipping Weight | 0.225 kg |
| Shipping Dimensions | 7 × 5 × 3 cm |
Overview
The XL4016E1 200W Step Down Power Supply Module is listed in our buck converter range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Output Power (W): 200
- Input Voltage (V): 4 to 40VDC (match this to your power supply; too high a voltage can damage the part)
- Output Voltage: 1.25 to 36VDC (match this to your power supply; too high a voltage can damage the part)
- Efficiency: 0.94
- Length (mm): 61 (measure your mounting space before ordering)
- Width (mm): 41 (measure your mounting space before ordering)
- Weight (g): 51 (important for drones, RC models and anything you carry)
- Switching frequency: 180 (make sure the rest of your system works at this frequency)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
Features:
- Adjustment method: first correct input power (between 4-40V) then multimeter to monitor the output voltage and adjust potentiometer (usually clockwise turn boost, buck turn counterclockwise),
- Input: IN+ input positive IN- input negative
- Output: OUT+ output positive OUT- output negative
- Static power consumption is only about 6mA.
- Connection: Welding, plus pin can be directly soldered after the PCB.
- Short circuit protection: current limiting, thermal protection, self-recovery.
- Non-isolated step-down (BUCK) switching regulator.
- Short circuit protection: Current limiting, self-recovery
- Potentiometer adjustment direction is as Clockwise (increase) and Anti-clockwise (decrease)
- Non-synchronous rectification
Package Includes:
1 x XL4016E1 200W Step-Down Power Supply ModuleQuick specs
- Output Power (W)
- 200
- Input Voltage (V)
- 4 to 40VDC
- Output Voltage
- 1.25 to 36VDC
- Efficiency
- 0.94
- Length (mm)
- 61
- Width (mm)
- 41













