
1 / 6 · Click to enlarge
AI Summary
The XY-LPWM is a compact PWM signal generator module with an LCD display and adjustable frequency (1 Hz–150 kHz) and duty cycle (1–100%). It offers wide 3.3–30 VDC operation, automatic parameter saving, and TTL serial control for flexible signal generation.
Key Highlights
- Adjustable frequency from 1 Hz to 150 kHz with auto-ranging
- Duty cycle adjustable from 1% to 100%
- Wide operating voltage: 3.3 to 30 VDC
- LCD display shows frequency and duty cycle
- Four switches for separate frequency and duty cycle adjustment
- TTL serial communication at 9600 bps for remote control
Ideal For
- Electronics hobbyists building PWM control circuits
- Engineers testing stepper motor drivers
- Makers needing a variable square wave source
- Students learning about PWM and signal generation
- Technicians repairing or calibrating PWM-controlled equipment
Buying Tip
Check that your intended load can be driven directly by the module's logic-level PWM output; for motors or high-current devices, plan for an external driver stage.
Elecvora expert review
Our verdict
The XY-LPWM packs a wide frequency range, clear LCD, and serial control into a very small board, making it a practical tool for PWM experiments. Its automatic parameter saving and broad voltage input add convenience for repeated use.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Very wide frequency range with auto-ranging
- LCD display simplifies monitoring
- Settings survive power loss
- Serial control adds remote configuration option
- Compact and lightweight
Cons
- Output is logic-level and cannot drive high-power loads directly
- Serial control requires a separate TTL adapter
- No enclosure or mounting holes mentioned
Best for
Electronics prototyping and test setups requiring a variable PWM source
Not ideal for
Directly powering motors, high-current LEDs, or other heavy loads without an external driver
Specifications
| Item Type | Signal Generator |
|---|---|
| Operating Voltage (VDC) | 3.3 to 30 |
| Model No. / Name | XY LPWM |
| Frequency (kHz) | 1 Hz - 150 kHz |
| Accuracy | 0.02 |
| Ambient Temperature (°C) | -20 to +70 |
| Dimensions (L x W x H) mm | 52 x 32 x 10 |
| Weight (g) | 13 |
| Shipping Weight | 0.017 kg |
| Shipping Dimensions | 5 × 3 × 2 cm |
What's in the box
- 1 x XY-LPWM Signal Generator Module
Frequently Asked Questions
What is the frequency range of this module?
Can I control the module remotely?
Does it remember settings after power off?
What is the output signal type?
What voltage can power the module?
What is included in the package?
Overview
The XY-LPWM is a two-channel PWM signal generator module that puts precise pulse control in a small, self-contained board. It is built around an LCD screen that continuously displays the current frequency and duty cycle, so you can see exactly what signal is being produced without external instruments. Four tactile switches handle adjustment: two for frequency and two for duty cycle. Short presses change values by a single unit, while long presses accelerate the change for faster setup.
With an operating voltage range of 3.3 to 30 VDC, the module can be powered from common breadboard supplies, battery packs, or industrial control cabinets. Frequency coverage spans 1 Hz to 150 kHz, and the module automatically selects the correct range as you adjust, simplifying operation across a very wide span.
Key Features
- LCD display for real-time frequency and duty cycle readout.
- Wide frequency range from 1 Hz to 150 kHz with automatic range switching.
- Duty cycle adjustable from 1% to 100%.
- Wide input voltage of 3.3 to 30 VDC.
- Parameter memory retains settings after power loss.
- Serial control via TTL at 9600 bps for remote configuration.
Specifications Explained
Frequency range (1 Hz–150 kHz): This covers slow pulses for timing experiments up to fast signals for clock generation. The display uses decimal point placement to indicate the active range: no decimal for 1–999 Hz, one decimal for 1.00–9.99 kHz, two decimals for 10.0–99.9 kHz, and a split decimal format for 1.0.0–1.5.0 (100–150 kHz).
Duty cycle (1–100%): Adjust the high-time proportion of the output pulse. This is useful for motor speed control, LED dimming, and servo positioning.
Operating voltage (3.3–30 VDC): The module accepts a broad supply range, making it compatible with many logic levels and battery systems.
Accuracy (0.02): The specified accuracy figure indicates the precision of the generated frequency.
Ambient temperature (-20 to +70 °C): Suitable for use in most indoor and protected outdoor environments.
Compatibility and Requirements
The module requires a DC power source within 3.3 to 30 V. For serial control, connect a TTL-level serial adapter at 9600 bps with 8 data bits, 1 stop bit, and no parity or flow control. The output is a PWM square wave suitable for driving logic-level inputs; for higher-power loads, an external driver stage is needed. No additional software is required for manual operation.
Typical Uses
Electronics hobbyists use the XY-LPWM to generate square waves for stepper motor drivers, to provide clock signals for microcontroller development, and to control PWM-adjustable lighting. It is also handy for bench testing circuits that require a variable pulse source, and for educational demonstrations of PWM principles.
What's in the Box
1 x XY-LPWM Signal Generator Module.

Quick specs
- Item Type
- Signal Generator
- Operating Voltage (VDC)
- 3.3 to 30
- Model No. / Name
- XY LPWM
- Frequency (kHz)
- 1 Hz - 150 kHz
- Accuracy
- 0.02
- Ambient Temperature (°C)
- -20 to +70













