
1 / 7 · Click to enlarge
At a glance
Made by YHDC, this current sensor clamps is a good fit for makers, students and electronics hobbyists. Main specs: item type Current Sensor; model no. / name Hall Current Sensor; transformer type open/split core. Check that your power source supplies 4V(± 5%) before connecting it.
Key Highlights
- Item Type: Current Sensor
- Model No. / Name: Hall Current Sensor
- Transformer type: open/split core
Ideal For
- Arduino, ESP32 and Raspberry Pi projects
- School and college lab work
- Prototypes and test rigs
Buying Tip
Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.
Specifications
| Item Type | Current Sensor |
|---|---|
| Model No. / Name | Hall Current Sensor |
| Transformer type | open/split core |
| Cable Type | 50 cm |
| Fire resistance | UL94-V0 |
| Operating Temperature (°C) | -10 ℃ ~ + 70 ℃ |
| Storage Temperature (°C) | -25 ℃ ~ + 70 ℃ |
| Frequency | DC ~ 25kHz |
| Dielectric Strength | 2.5KV 50Hz 1min |
| Accuracy | 0.01 |
| Supply Voltage | 4V(± 5%) |
| Current consumption | ≤ ± 12mA |
| Hole diameter(mm) | 16mm |
| Response Time (uS) | ≤ 5μs |
| Weight (g) | 81 g |
| Shipping Weight | 0.1 kg |
| Shipping Dimensions | 6 × 4 × 2 cm |
Overview
The YHDC HST016L 200A 4V Hall Split Core Current Sensor, made by YHDC, is listed in our current sensor clamps range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.
Specifications explained
- Item Type: Current Sensor (your supply must deliver at least this much current)
- Model No. / Name: Hall Current Sensor (your supply must deliver at least this much current)
- Transformer type: open/split core
- Cable Type: 50 cm
- Fire resistance: UL94-V0
- Operating Temperature (°C): -10 ℃ ~ + 70 ℃
- Storage Temperature (°C): -25 ℃ ~ + 70 ℃ (space for firmware, files or media)
- Frequency: DC ~ 25kHz (make sure the rest of your system works at this frequency)
Before you order
Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.
The HST016L current transducer can be used to measure direct, alternating, and pulsating currents. It was designed on the principle of an open loop and there is galvanic isolation between the primary conductor and the secondary circuit. Thanks to its design - the openable core is ideal for installation on a cable without breaking the primary circuit. The hole diameter is 16 mm. The output of the transducer reflects the real wave of the conductor. The advantage of this sensor is its low power consumption, which is particularly advantageous when measuring high currents. The length of the cables exiting the transformer is 50 cm (red, black, green, white).
Wiring diagram:- Red: + 15V
- Black: -15V
- Yellow: Vout
- White: 0V
Features:
- Transformer type: open/split core
- Sensor output: voltage
- Cable: 50 cm
- Fire resistance: UL94-V0
- Working temperature: -10 ℃ ~ + 70 ℃
- Storage temperature: -25 ℃ ~ + 70 ℃
- Frequency: DC ~ 25kHz
- Dielectric strength: 2.5KV 50Hz 1min
- Rated input: ± 200A
- Measured range: ± 200A
- Rated output: 4V
- Accuracy: 1%
- Linearity: 1%
- Supply voltage (± 5%): 4V
- Power consumption: ≤ ± 12mA
- Hole diameter (Ø) - 16mm
- Response time: ≤ 5 μs
- Weight: 81 g
1 x YHDC HST016L 200A 4V Hall Split Core Current Sensor
Quick specs
- Item Type
- Current Sensor
- Model No. / Name
- Hall Current Sensor
- Transformer type
- open/split core
- Cable Type
- 50 cm
- Fire resistance
- UL94-V0
- Operating Temperature (°C)
- -10 ℃ ~ + 70 ℃


















