Skip to main content

Worldwide Shipping · Secure Payments

At a glance

Made by YHDC, this current  sensor clamps is a good fit for makers, students and electronics hobbyists. Main specs: item type Current Sensor; model no. / name YHDC SCT016S; core material Silicon steel sheet. Check that your power source supplies 720V before connecting it.

Key Highlights

  • Item Type: Current Sensor
  • Model No. / Name: YHDC SCT016S
  • Core Material: Silicon steel sheet

Ideal For

  • Arduino, ESP32 and Raspberry Pi projects
  • School and college lab work
  • Prototypes and test rigs

Buying Tip

Compare the pin layout and operating voltage with your circuit, and order a spare or two: small parts are easy to damage while soldering.

Specifications

Item TypeCurrent Sensor
Model No. / NameYHDC SCT016S
Core MaterialSilicon steel sheet
Operating Voltage720V
I/O Current Consumption100A, Output 1A
Operating Temperature (°C)-25℃~+60℃
Storage Temperature (°C)-30℃~+90℃
Frequency50Hz~1KHz
Dielectric Strength3.5KV 50Hz 1min
Shipping Weight0.089 kg
Shipping Dimensions6 × 5 × 4 cm

Overview

The YHDC SCT016S 100A 1A Split Core Current Transformer, made by YHDC, is listed in our current  sensor clamps range and suits makers, students and electronics hobbyists. The notes below explain the main specifications and what to check before you order.

Specifications explained

  • Item Type: Current Sensor (your supply must deliver at least this much current)
  • Model No. / Name: YHDC SCT016S
  • Core Material: Silicon steel sheet (affects weight, heat handling and how the part wears)
  • Operating Voltage: 720V (match this to your power supply; too high a voltage can damage the part)
  • I/O Current Consumption: 100A, Output 1A (your supply must deliver at least this much current)
  • Operating Temperature (°C): -25℃~+60℃
  • Storage Temperature (°C): -30℃~+90℃ (space for firmware, files or media)
  • Frequency: 50Hz~1KHz (make sure the rest of your system works at this frequency)

Before you order

Compare the specifications with your project or device, and check delivery times and return terms for your country in our help centre. Questions about this item? Email [email protected] with the product code.

Split-core current transformers provide accurate measurements of AC electrical systems and feature a removable or hinged leg for easy installation without disconnecting wires or interrupting power. Both retrofit and semi-permanent metering applications can benefit from the split-core’s non-invasive design. Split core CTs have a “split” in the core that allows the CTs to open and be placed around the conductor without having to disconnect the conductor or disrupt the wiring. Split core CTs may be more expensive but their convenience generally outweighs their cost when dealing with retrofit installations. Dual core CT can be used for two simultaneous applications like metering & relay protection. In case if one winding is used & other is un-used then other winding must be short circuited to avoid high induced voltage in unused winding. This is a mini split base current transformer; it’s the smallest one compared to the similar products (output 100MA). The diameter of inner hole is 16mm, the accuracy is less than equal 0.5 grade, Our ac sensing relay using snap joint structure, it can be fixed to the cable directly through nylon ties. The amp transformer is with Built-in input coil; small and light, easy to install. Fully enclosed CT, good mechanical properties and environmental resistance, strong voltage isolation capability, safety and reliability.

Note: Actual Product can vary from above image


Features:

  1. Model: YHDC SCT016S
  2. Material of core: Silicon steel sheet
  3. Work voltage:720V
  4. I/O Current 100A, Output 1A
  5. Operating temperature:-25℃~+60℃
  6. Storage temperature:-30℃~+90℃
  7. Frequency range:50Hz~1KHz
  8. Dielectric strength:3.5KV 50Hz 1min

Packages Includes:

1 x YHDC SCT016S-100A-1A Split core current transformer

Quick specs

Item Type
Current Sensor
Model No. / Name
YHDC SCT016S
Core Material
Silicon steel sheet
Operating Voltage
720V
I/O Current Consumption
100A, Output 1A
Operating Temperature (°C)
-25℃~+60℃
See all specifications