
1 / 4 · Click to enlarge
AI Summary
A compact 1.3 inch OLED module with 128x64 pixel resolution and an SPI serial interface, showing blue text on a black background. Its self-illuminating panel needs no backlight, so it stays thin and draws very little power.
Key Highlights
- 1.3 inch self-illuminating OLED panel with 128x64 pixel resolution
- SPI serial interface for straightforward wiring to a microcontroller
- Blue characters on a black background for strong contrast
- No backlight required, keeping the module thin and efficient
- Wide viewing angle for readable output from the side
- Rated for operation from -30 to 60 degrees Celsius
Ideal For
- Arduino hobbyists adding a compact status screen
- Electronics students learning SPI displays
- Makers building handheld sensor readouts
- Prototype developers needing a thin self-illuminating panel
- DIY instrument and gadget builders
Buying Tip
Check that your project can supply the module's stated DC 2.8V requirement and has free SPI pins before ordering.
Elecvora expert review
Our verdict
A tidy, low-power display module that adds a readable 128x64 screen to microcontroller projects without a backlight. The SPI wiring is straightforward and the blue-on-black output is easy to read.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Self-illuminating panel with no backlight
- Compact 1.3 inch size with 128x64 resolution
- Simple SPI serial connection
- Wide viewing angle and broad operating temperature range
Cons
- Stated supply is DC 2.8V, so voltage must be checked
- Control pins and wiring must be configured correctly
- Small screen limits the amount of text shown at once
Best for
Arduino and microcontroller projects needing a compact status display
Not ideal for
Large-format or full-colour graphical interfaces
Specifications
| Model No. / Name | OLED Display Module |
|---|---|
| Display Size (Inch) | 1.3 |
| Display Resolution (pixel) | 128 × 64 |
| Operating Temperature (°C) | -30 to 60 |
| Character Color | Blue |
| Additional Specs. | Background Color: Black |
| Weight (g) | 150 |
| Shipping Weight | 0.2 kg |
| Shipping Dimensions | 8 × 8 × 2 cm |
What's in the box
- 1 x 1.3 Inch 128x64 OLED Display Screen Module with SPI Serial Interface - V2
Frequently Asked Questions
What resolution does this OLED module offer?
How does the module connect to a microcontroller?
What supply voltage does it need?
Does the display need a backlight?
What is included with the module?
What temperature range does it support?
Overview
This 1.3 inch OLED display module puts a 128x64 pixel screen into a format small enough for handheld and panel-mounted projects. The panel uses organic electroluminescence, so each pixel emits its own light instead of relying on a backlight. That design keeps the module slim and energy-efficient while delivering blue characters against a black background with clear contrast.
Communication is handled over an SPI serial interface, which connects to a host board using a small set of signal lines. The module is a practical way to add a readable status screen, menu or sensor readout to an Arduino project or other microcontroller build.
Key Features
- Self-illuminating OLED panel: no backlight layer is needed, so the display stays thin.
- 128x64 pixel resolution: enough room for text, icons and simple graphics.
- SPI serial interface: a compact wiring scheme for microcontroller projects.
- Blue on black: high-contrast characters that are easy to read.
- Wide viewing angle: the screen remains legible when viewed from the side.
- Broad temperature range: rated for operation between -30 and 60 degrees Celsius.
Specifications Explained
The 1.3 inch diagonal is a good middle ground for projects that need more detail than a tiny badge display but cannot fit a larger panel. At 128x64 pixels, the screen can show several lines of text or a compact graphical interface.
Because the OLED material glows when current is applied, there is no backlight to power, which is the main reason this module is associated with low energy use. The blue character colour on a black background produces strong contrast, and the self-emitting design supports a viewing angle of roughly greater than 160 degrees.
The operating range of -30 to 60 degrees Celsius covers typical indoor and sheltered outdoor use. The module is supplied for a DC 2.8V supply according to the product data, so check your host board's logic and supply arrangement before wiring.
Compatibility and Requirements
The module is described as fully compatible with Arduino and connects over SPI. Typical wiring uses GND, VDD at 3.3V, MOSI to D11, SCK to D13, and D/C, RST and CS on digital pins such as D8, D9 and D10. MOSI and SCK are fixed by the SPI hardware, while the control pins can be reassigned. Confirm the supply voltage matches the module's stated DC 2.8V requirement before powering it.
Typical Uses
Common applications include sensor readouts, small menu systems, status indicators, handheld instrument displays and prototype user interfaces. The compact size and low power draw make it a natural fit for battery-conscious builds and enclosures where space is limited.
What's in the Box
One 1.3 inch 128x64 OLED display screen module with SPI serial interface, V2.
Quick specs
- Model No. / Name
- OLED Display Module
- Display Size (Inch)
- 1.3
- Display Resolution (pixel)
- 128 × 64
- Operating Temperature (°C)
- -30 to 60
- Character Color
- Blue
- Additional Specs.
- Background Color: Black

















