
1 / 4 · Click to enlarge
AI Summary
A 40-piece set of 10CM female to female DuPont jumper cables with 2.54mm 1P-1P connectors for solderless breadboard prototyping. Individual leads let you use exactly the number of wires each build needs and re-plug them again and again.
Key Highlights
- 40 individual female to female DuPont jumper cables per pack
- 100mm length suits compact breadboard and PCB layouts
- 2.54mm pitch, 1P-1P connectors fit standard pin headers
- Solderless plug-and-unplug design for fast prototyping
- Flexible leads can be separated to match your wiring needs
- Reusable construction for repeated project work
Ideal For
- Makers building and rebuilding breadboard prototypes
- Students learning electronics and circuit assembly
- Raspberry Pi, Arduino and other development board users
- Technicians making temporary test connections during repair
- Workshops and classrooms that reuse wiring across projects
Buying Tip
Check that your boards and breadboard use 2.54mm male pins, since these female-ended leads need pins to plug onto rather than sockets.
Elecvora expert review
Our verdict
A straightforward, useful consumable for anyone who prototypes on breadboards. The 40-piece count and 100mm length cover most small builds, and the female-to-female ends suit the common board-to-breadboard case.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- 40 leads give plenty of spares for repeated builds
- Correct 2.54mm pitch for standard headers and breadboards
- Individual wires allow flexible routing
- No soldering needed and easily reused
Cons
- Female ends only, so they need male pins to connect to
- Short 100mm length limits reach on larger layouts
- Unbranded, so no brand support or documentation included
Best for
Breadboard prototyping and development board wiring
Not ideal for
Long cable runs or permanent soldered installations
Specifications
| Cable Type | Female to Female |
|---|---|
| Length (mm) | 100 |
| Weight (g) | 25 |
| Compatible Pin Header | 1P-1P |
| DuPont Line | 40P |
| Header Pin Width (mm) | 2.54 |
| Shipping Weight | 0.03 kg |
| Shipping Dimensions | 8 × 8 × 6 cm |
What's in the box
- 40 x 10CM female to female DuPont jumper cables (2.54mm, 1P-1P)
Frequently Asked Questions
What can these cables connect to?
How many cables are included?
Do I need to solder anything?
Are they compatible with Raspberry Pi and Arduino?
Can I use only some of the cables?
How should I store and care for them?
Overview
This pack contains 40 individual DuPont jumper cables, each 100mm long and fitted with a 1-pin female connector at both ends. The connectors are built for 2.54mm spacing pin headers, the common pitch used on breadboards, development boards and many circuit boards. Because each lead is separate rather than moulded into a ribbon, you can pull out exactly the number of wires a circuit requires and leave the rest in the pack.
The female-to-female format means both ends plug onto pins, so the cable sits between two male headers or between a board and a breadboard row without any soldering. That makes it a practical consumable for anyone who builds, tests and rebuilds circuits regularly.
Key Features
- 40 pieces per pack: enough leads for small to medium prototyping sessions, with spares for later builds.
- 100mm length: short enough to keep wiring tidy on compact layouts.
- 2.54mm pitch: matches standard breadboard and header spacing.
- 1P-1P configuration: single-pin female connectors at each end.
- Reusable: leads can be plugged and unplugged repeatedly for iterative work.
- Flexible: the cable bends easily around components and board edges.
Specifications Explained
Female to female describes the connector at each end: both are sockets that push onto male pins. This is the right choice when the two points you want to link both present pins, such as a breadboard row and a header on a development board.
2.54mm header pin width is the centre-to-centre spacing the connectors are designed for. It is the standard pitch for breadboards and through-hole pin headers, so the leads seat properly rather than sitting loose or forcing the pins apart.
1P-1P means each cable carries a single connection, giving you full freedom to route wires individually instead of being tied to a fixed ribbon layout.
100mm length keeps runs short, which helps when working in tight spaces or when you want to avoid a tangle of long leads across a small board.
Compatibility and Requirements
The cables are intended for 2.54mm spacing pin headers and are commonly used with development boards and mini PCs, including Raspberry Pi, Arduino, Orange Pi and Banana Pi, as well as breadboards, PCB projects and PC motherboards. No soldering is required; you need matching male pins or breadboard slots for the female ends to plug onto.
Typical Uses
Use them to connect a development board's header pins to a breadboard, to link modules and sensors during a prototype, to patch signals on a test circuit, or to make temporary connections during repair and diagnosis. They are also handy in classrooms and workshops where circuits are assembled and taken apart often.
What's in the Box
40 x 10CM female to female DuPont jumper cables (2.54mm, 1P-1P).

Quick specs
- Cable Type
- Female to Female
- Length (mm)
- 100
- Weight (g)
- 25
- Compatible Pin Header
- 1P-1P
- DuPont Line
- 40P
- Header Pin Width (mm)
- 2.54
Explore more
Frequently Bought Together

20CM DuPont Wire Color Jumper Cable 2.54mm 1P-1P Female to Female 40PCS
$5.99
70CM 3 Pin Female to Female Dupont Cable For 3D Printer - 2Pcs
$6.99
70CM 4 Pin Female to Female Dupont Cable For 3D Printer - 2Pcs
$6.99
10 CM 40 Pin Dupont Cable Male/Male, Male/Female, Female/Female Cable Combo
$6.99
Pro-Range 310PCS 2.54mm DuPont Connector With Rubber Shell With Terminal Kit
$7.99












