Skip to main content

Worldwide Shipping · Secure Payments

AI Summary

A compact 6-28V, 3A PWM speed regulator that lets you adjust brushed DC motor speed from 0% to 100%. Its four screw terminals make inline wiring simple for small robotics and DIY projects.

Key Highlights

  • Adjustable 0-100% speed control via PWM
  • Wide 6V to 28V DC input range
  • Continuous 3A current rating
  • Compact 65mm board weighs only 25g
  • Four labeled terminals for motor and power
  • Works with brushed DC motors and DC loads

Ideal For

  • Robotics hobbyists building small DC motor projects
  • Makers adding variable speed to fans or pumps
  • Technicians testing brushed DC motors
  • DIY enthusiasts working with 6V to 28V systems
  • Students learning about PWM motor control

Buying Tip

Check that your motor's rated voltage falls within 6-28V and its normal running current stays below 3A before ordering.

Elecvora expert review

Our verdict

A practical, no-frills PWM regulator that does exactly what it promises for small brushed DC motors. It is a sensible choice for low-power projects where a simple inline speed control is all you need.

AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.

Pros

  • Wide 6-28V input range covers common hobby voltages
  • Simple four-terminal wiring
  • Compact and lightweight for tight builds
  • Smooth 0-100% speed adjustment

Cons

  • 3A limit restricts use to small motors
  • Power supply and wiring not included
  • Knob or connector colour may vary from photos

Best for

Small brushed DC motor projects up to 3A and 28V

Not ideal for

High-current motors or brushless motor control

Specifications

Item TypePWM Speed Regulator
Current Rating (A)3
Voltage Rating (V)6 to 28
Length (mm)65
Width (mm)32
Weight (g)25
Shipping Weight0.03 kg
Shipping Dimensions6 × 5 × 3 cm

What's in the box

  • 1 x 1203B PWM 6V-28V 3A DC Motor Speed Regulator

Frequently Asked Questions

What type of motor can I use with this regulator?
It is intended for brushed DC motors and other DC loads rated between 6V and 28V with a current draw of up to 3A.
Does it come with a power supply?
No, the package includes only the speed regulator. You need to provide a separate DC power source within the 6V to 28V range.
How do I connect the wires?
Connect the motor to Motor+ and Motor-, and connect your DC supply to Power+ and Power-. The terminals are labeled on the board.
Can I adjust the speed from zero to full?
Yes, the knob provides fully adjustable speed control from 0% to 100% of the output.
Will the product look exactly like the photo?
The front knob or connector colour may vary depending on availability, but the regulator's function and ratings remain the same.
How should I care for the regulator?
Mount it securely, keep terminals from shorting, and ensure some airflow around the board during extended operation. Avoid exceeding the 3A current rating.

Overview

The 1203B PWM Speed Regulator is a small inline controller for brushed DC motors and other DC loads. It accepts a DC input between 6V and 28V and delivers a continuously adjustable output from 0% to 100% using pulse-width modulation. The board measures 65mm by 32mm and weighs just 25g, so it slips into tight enclosures and small project boxes. Four clearly marked terminals handle Motor+, Motor-, Power+, and Power-, making the wiring straightforward for anyone comfortable with basic DC connections.

Key Features

  • Fully adjustable speed: Turn the knob to set motor speed anywhere from stopped to full output.
  • Broad voltage support: One regulator covers 6V, 12V, 24V, and 28V DC systems.
  • 3A continuous current: Suitable for small motors and DC loads that draw up to 3A.
  • Compact footprint: 65mm length and 25g weight keep your build light and tidy.
  • Simple four-wire hookup: Dedicated terminals for motor and power connections.

Specifications Explained

Voltage rating (6-28V): The regulator accepts a DC supply anywhere in this range, so it suits 6V, 12V, 24V, and 28V systems. Make sure your motor's rated voltage falls within the same range.

Current rating (3A): The board can pass a continuous current of up to 3A to the motor or load. Motors that draw more than this under normal load are not a good match.

PWM control: Pulse-width modulation switches the output on and off rapidly to vary the average voltage. This gives smooth speed adjustment without the heat losses of a resistive controller.

Dimensions and weight: At 65mm long, 32mm wide, and 25g, the board is easy to mount in small spaces. Allow some airflow around it during extended use.

Compatibility and Requirements

This regulator is designed for DC motors and DC loads operating between 6V and 28V with a current draw of up to 3A. It requires a separate DC power source within that voltage range; the power supply is not included. Wiring is done through the four labeled terminals. The product image may vary in terms of front knob or connector colour depending on availability.

Typical Uses

  • Variable speed control for small brushed DC motors
  • Slowing or tuning cooling fans and blowers
  • DIY robotics and hobby motor projects
  • Adjusting speed on small pumps or conveyor mechanisms
  • General low-voltage DC load control

What's in the Box

1 x 1203B PWM 6V-28V 3A DC Motor Speed Regulator.

Quick specs

Item Type
PWM Speed Regulator
Current Rating (A)
3
Voltage Rating (V)
6 to 28
Length (mm)
65
Width (mm)
32
Weight (g)
25
See all specifications