
1 / 4 · Click to enlarge
AI Summary
A two-pack of 2 x 8 cm double-sided FR4 prototype boards for soldering through-hole circuits. The compact strip size and 0.3 mm minimum holes make it easy to build small, self-contained layouts.
Key Highlights
- Two double-sided FR4 prototype boards, each 2 x 8 cm
- 1.6 mm board thickness for a rigid, stable build
- Minimum hole size of 0.3 mm for fine through-hole work
- Double-sided copper supports denser point-to-point layouts
- Slim strip format fits narrow enclosures and tight spaces
- Unpopulated boards let you choose every component
Ideal For
- Hobbyists prototyping small sensor and signal circuits
- Students learning through-hole soldering techniques
- Makers fitting compact circuits into narrow enclosures
- Repair technicians building small adapter boards
- Electronics learners who want a spare board on hand
Buying Tip
Check that your component leads fit the 0.3 mm minimum hole size and plan a compact layout before soldering, since the 2 cm width leaves little room for large parts.
Elecvora expert review
Our verdict
A simple, well-sized two-pack of double-sided FR4 prototype boards for small through-hole builds. The narrow 2 x 8 cm format is the main reason to choose it, and the unpopulated boards keep your options open.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Two boards per pack gives a spare for the next build
- Double-sided copper supports denser routing
- Rigid 1.6 mm FR4 stays flat during soldering
- Compact 2 x 8 cm strip fits narrow spaces
Cons
- No components, headers or mounting hardware included
- Small 2 cm width limits larger layouts
- 0.3 mm minimum hole size may not suit thick leads
Best for
Small through-hole prototype circuits and compact builds
Not ideal for
Large multi-module projects that need a full-size board
Specifications
| Item Type | PCB Prototype Board |
|---|---|
| Dimensions (LxWxH) cm | 2 x 8 |
| Base Material | FR4 |
| Additional Specs. | Board Thickness: 1.6, Copper Thickness (mm): 1-4 oz |
| Min. Hole Size (mm) | 0.3 |
| Shipping Weight | 0.001 kg |
| Shipping Dimensions | 1 × 1 × 1 cm |
What's in the box
- 2 x 2 x 8 cm universal PCB prototype boards, double-sided
Frequently Asked Questions
What is included in the pack?
Are the boards double-sided?
What is the minimum hole size?
Do the boards come pre-assembled?
What material are the boards made from?
How should I care for the boards?
Overview
These universal prototype boards are a practical starting point for anyone who wants to solder a circuit without ordering a custom PCB. The pack contains two boards, each measuring 2 x 8 cm, made from FR4 with a 1.6 mm thickness. Both sides carry copper, so you can route connections on either face and use the board as a compact, rigid base for through-hole parts.
The long, narrow shape is the standout detail. At 2 cm wide, the board slips into places where a larger prototyping board will not fit, such as inside a small enclosure or beside a module on a project tray. The 0.3 mm minimum hole size keeps the drilling fine enough for small component leads while still accepting common through-hole parts.
Key Features
- Double-sided copper: route signals and power on both faces for tidier, denser layouts.
- FR4 base material: a familiar, rigid substrate that holds soldered joints well.
- 1.6 mm thickness: the board stays flat and resists flexing during soldering and handling.
- 0.3 mm minimum hole size: supports fine through-hole component leads.
- Two boards per pack: build one circuit and keep a spare for the next idea.
Specifications Explained
2 x 8 cm dimensions describe the board footprint. That is a small strip rather than a full-size prototyping board, so plan your layout around a limited area and expect to work compactly.
FR4 base material is a glass-reinforced epoxy laminate widely used for rigid circuit boards. It gives the board mechanical stability and tolerates normal soldering temperatures.
1.6 mm board thickness is a common rigid PCB thickness. It helps the board stay flat when you push component leads through and keeps the finished assembly stiff.
0.3 mm minimum hole size is the smallest hole dimension on the board. Very thick component leads may not fit, so check your parts before soldering.
Double-sided construction means copper is present on both faces. You can use the second side for additional routing or as a ground plane, depending on how you build the circuit.
Compatibility and Requirements
The boards are unpopulated, so you need to supply your own through-hole components, wire and solder. A soldering iron, flux and basic hand tools are required to assemble a circuit. No headers, terminals or mounting hardware are included. Because hole size and layout details beyond the listed specifications are not provided, test-fit larger components before committing to a layout.
Typical Uses
These boards suit small sensor breakouts, simple power and signal circuits, adapter wiring, repair work and student projects. The narrow format also works well for fitting a compact circuit into a project box or alongside another module. Hobbyists often keep a pair on hand for quick experiments that do not justify a custom board order.
What's in the Box
Two 2 x 8 cm universal PCB prototype boards, double-sided.
Quick specs
- Item Type
- PCB Prototype Board
- Dimensions (LxWxH) cm
- 2 x 8
- Base Material
- FR4
- Additional Specs.
- Board Thickness: 1.6, Copper Thickness (mm): 1-4 oz
- Min. Hole Size (mm)
- 0.3
- Shipping Weight
- 0.001 kg














