
1 / 4 · Click to enlarge
AI Summary
The 2M2283 is an AC-powered stepper driver for two-phase and four-phase hybrid motors, delivering 2.0–8.3A with 16 micro-step settings up to 51200 steps/rev. Its optical-isolated I/O and 200kHz pulse response make it a solid match for 110BYG and 130BYG motors in demanding positioning tasks.
Key Highlights
- 150–220VAC input for direct AC-powered stepper systems
- Output current adjustable from 2.0A to 8.3A in 16 stalls
- 16 micro-step settings from full step to 51200 steps/rev
- Maximum pulse frequency up to 200kHz for fast response
- Optical isolating signal I/O for control-side protection
- Automatic idle-current reduction and built-in self-test
Ideal For
- Machine builders using 110BYG or 130BYG hybrid stepper motors
- CNC and automation projects needing AC-powered stepper control
- Integrators requiring fine micro-stepping up to 51200 steps/rev
- Engineers replacing or upgrading a two-phase or four-phase stepper driver
- Makers working with motors rated between 2A and 8.3A
Buying Tip
Confirm your motor’s rated phase current falls within 2.0–8.3A and that your AC supply stays inside the 150–220VAC window before ordering.
Elecvora expert review
Our verdict
The 2M2283 is a capable AC-input stepper driver that covers a wide current range and very fine micro-stepping, making it a good fit for 110BYG and 130BYG class motors. Its optical isolation, automatic idle-current reduction, and 200kHz pulse response address the practical needs of smooth, protected motion control.
AI-assisted analysis based on the manufacturer's specifications. Not a hands-on lab test.
Pros
- Wide 2.0–8.3A output range with 16 current stalls
- 16 micro-step settings up to 51200 steps/rev
- 200kHz maximum pulse frequency
- Optical isolation on signal I/O
- Built-in overvoltage, undervoltage, and overcurrent protection
Cons
- AC-only input limits use to systems with a suitable AC supply
- No motor or power cables included
- Requires careful current and micro-step configuration for best results
Best for
Builders using 110BYG or 130BYG hybrid stepper motors in automation or CNC positioning
Not ideal for
Low-voltage DC stepper systems or motors rated below 2A
Specifications
| Voltage Rating (V) | 150 to 220VAC |
|---|---|
| Current Rating (A) | 2 to 8.3 |
| Motor Driver Voltage (V) | 150VAC~220VAC |
| Stepper Motor Output (A) | 2A~8.3A |
| Logic Voltage (V) | 7 - 16 mA |
| Pulse Frequency (KHz) | 200 |
| Shipping Weight | 1.56 kg |
| Shipping Dimensions | 25 × 21 × 12 cm |
What's in the box
- 1 x 2M2283 Stepper Motor Driver
Frequently Asked Questions
What motors does the 2M2283 work with?
What power supply does it need?
How fine can the micro-stepping be?
Does the package include a motor or cables?
What protection features are built in?
What is the maximum pulse frequency?
Overview
The 2M2283 is a micro-step stepper motor driver built for two-phase and four-phase hybrid stepping motors, including 130BYG and 110BYG series. It runs from an AC supply between 150VAC and 220VAC and delivers an output current you can set from 2.0A to 8.3A across 16 stalls, giving roughly 0.5A resolution. With 16 micro-step options ranging from full step to 51200 steps per revolution, it suits applications where smooth motion and fine positioning matter.
Key Features
- AC-powered operation: Works directly from 150–220VAC, simplifying wiring in systems that already use AC supplies.
- Wide current range: 2.0A to 8.3A output, settable in 16 stalls, to match a broad set of hybrid motors.
- Fine micro-stepping: 16 settings from full step up to 51200 steps/rev for smooth, quiet movement.
- Fast pulse response: Maximum pulse frequency of 200kHz supports rapid command tracking.
- Optical isolation: Signal I/O is optically isolated to help protect the controller side.
- Smart current management: Automatic idle-current reduction and online adaptive PID technology help keep the motor cool and motion smooth.
- Protection and diagnostics: Overvoltage, undervoltage, and overcurrent protection plus a self-test function.
Specifications Explained
Voltage rating (150–220VAC): This is an AC-input driver, so it does not need a separate DC power supply in the usual sense. Keep the supply within the stated range; the source notes the driver is intended for AC power not exceeding 240VAC and not below 120VAC, but the published rating here is 150–220VAC.
Current rating (2–8.3A): Set the output current to match your motor’s rated phase current. The 16 stalls give about 0.5A resolution, so you can get close to the motor’s specification without overdriving it.
Micro-step range: Choose full step for maximum torque at low speeds, or finer micro-steps for smoother motion and reduced resonance. The highest setting, 51200 steps/rev, is useful for very fine positioning.
Pulse frequency (200kHz): This is the maximum rate at which the driver can accept step pulses. Higher frequencies allow faster motion, provided the motor and mechanics can keep up.
Logic voltage (7–16 mA): The signal input current is specified in milliamps, which is typical for optically isolated inputs. Check your controller’s output can supply the required current.
Compatibility and Requirements
The 2M2283 is intended for two-phase and four-phase hybrid stepping motors, with the source specifically naming 130BYG and 110BYG series and other motors drawing up to 8A. It requires an AC supply within the rated voltage window. Signal wiring should be compatible with the optically isolated inputs. No motor, power supply, or cabling is included unless stated in the package contents.
Typical Uses
This driver is suited to automation equipment, CNC positioning stages, and other systems using larger hybrid stepper motors where smooth motion and low vibration are important. Its 200kHz pulse response and fine micro-stepping make it useful for tasks that combine moderate speed with precise positioning.
What's in the Box
Package includes: 1 x 2M2283 Stepper Motor Driver.
Quick specs
- Voltage Rating (V)
- 150 to 220VAC
- Current Rating (A)
- 2 to 8.3
- Motor Driver Voltage (V)
- 150VAC~220VAC
- Stepper Motor Output (A)
- 2A~8.3A
- Logic Voltage (V)
- 7 - 16 mA
- Pulse Frequency (KHz)
- 200













